Tongtai VU Ultrasonic assisted machining center

Tongtai VU Ultrasonic Assisted Machining Center is a machine that utilizes ultrasonic technology to improve machining processes. It has a high-speed spindle that can accommodate standard BBT-30 tools and operates at 24,000 rpm. The ultrasonic control technology allows for efficient frequency scanning and power settings, which can reduce cutting resistance and process temperature. This extends the lifetime of the tool and reduces the time needed for polishing. It can also reduce burr formation on hard and brittle materials, and micro-hole processing can be done for such materials. This machine finds application in the medical industry, precise ceramic industry, and glass industry. It is suitable for tasks such as artificial crown machining, roughing and finishing, drilling, polishing, and chamfering. The machine has a table size of 850x410mm, a maximum table load of 250kg, and a spindle taper of 7/24 Taper. The X/Y/Z axis travel is 510/400/350mm, and the rapid traverse is 48/48/48m/min. The machine has a tool capacity of 20-30 pieces and a spindle motor of 50kW. The machine size is 1700x2600x2700mm, and it weighs 2850kg. It is controlled by the Mitsubishi M70VA or Fanuc Oi-MF controller.

Turning capacity:

Max. swing diameter: 520mm

Max. swing diameter over saddle: 320mm

Max. turning diameter: 300mm

Max. turning length: 300mm

Spindle:

Spindle nose: A2-5

Spindle speed: 4000-6000 rpm

Chuck inch: 8

Through-spindle hole diameter: 5.5mm

Bar capacity: 44mm

Spindle bearing diameter: 80mm

Min. C-axis indexing increment: decimal

Sub-spindle:

Spindle nose: n/a

Spindle speed: n/a

Through-spindle hole diameter: n/a

Spindle bearing diameter: n/a

Min. C-axis indexing increment: degrees

Turret:

Tool capacity: 12pcs

Tool size: n/a

Power turret tool capacity: VD1-40: 12

Motor:

Motor kW: 12/9/7.5

Sub-spindle motor: n/a

X/Z axis servo motor kW: n/a

Travel:

X/Y/Z/C-axis travel: 200/400/-/n/a

X/Y/C-axis rapid traverse: 160/120/35 m/min

X/Y/C-axis servo motor kW: n/a

Clamp capacity: 3x2kg

Tailstock:

Tailstock/Quill travel: 275/100mm

Center taper: MT4

Driving system: manual

Robotic arm:

X/Y/C-axis rapid traverse: n/a

X/Y/C servo motor kW: n/a

Load/Unload time inner/outer: k-6/20 sec

Hydraulic unit:

Hydraulic tank capacity: 30L

Hydraulic motor kW: n/a

Machine size:

Width x depth x height: 3370 x 2150 x 2480mm

Weight: 3350kg

Controller: Fanuc Oi-TF.

Turning capacity with various specifications is provided in the text. However, non-English words have been used in some cases. Here is the revised text with non-English words removed:

Turning capacity:

Max. swing diameter: 720 mm Max. swing diameter over saddle: 310 mm Max. turning diameter: 320 mm Max. turning length: 600 mm

Spindle: Spindle nose: A2-6 Spindle speed: 4,500-6,000 rpm Chuck size: 8 inches Through-spindle hole diameter: 76 mm (main), 62 mm (sub) Bar capacity: 65 mm (main), Ø51 mm (sub) Spindle bearing diameter: 100 mm Spindle center to floor: unspecified Min. CS axis indexing increment: unspecified

Sub-spindle: Spindle nose: A2-6 Spindle speed: unspecified Chuck size: unspecified Through-spindle hole diameter: 62 mm Bar capacity: unspecified Spindle bearing diameter: 100 mm Min. CS axis indexing increment: unspecified

Power turret: Tool shank: 12V (main), BMT65 (sub), 16V (main), BMT55 (sub) Tool capacity: 12 (main), unspecified (sub) Tool size: 25x25 mm (main), 40 mm (sub) Max. speed: unspecified Spindle motor: unspecified Max. tool diameter: Dia. 20/M16

Travel: X1/X2/X3 axis travel: 230/205/230 mm Y1/Y2/Y3 axis travel: 51/51/51 mm Z1/Z2/Z3/B axis travel: 440/600/440/680 mm

Feed: X/Y/Z/B axis rapid traverse: 30/15/36/30 m/min X/Z axis cutting feed rate: unspecified

Hydraulic unit: Hydraulic tank capacity: 40 L Hydraulic motor: unspecified

Coolant unit: Coolant tank capacity: 500 L Coolant pump motor: 1 kW

Machine: Width x Depth x Height: 4,100 x 2,600 x 2,500 mm Weight: 10,630 kg Controller: Fanuc 31 i-B

Additional Information: Max. swing diameter: 280 mm Max. swing diameter over saddle: 280 mm Max. turning diameter: 280 mm Max. turning length: 250 mm

Spindle: Spindle nose: A2-11 Spindle speed: 2,500 rpm Chuck size: unspecified Through-spindle hole diameter: unspecified Bar capacity: Ø26 mm Spindle bearing diameter: 160 mm Spindle center to floor: 1,000 mm Min. CS axis indexing increment: unspecified

Power turret: Tool shank: unspecified Tool capacity: 6 Tool size: 32x32 mm (main), 50 mm (sub) Max. speed: unspecified Spindle motor: unspecified Max. tool diameter: unspecified Max. tool length: unspecified

Travel: X axis travel (left/right): 450/450 mm Y axis travel: unspecified Z axis travel (left/right): 450/450 mm

Feed: X/Z axis rapid traverse: 20/20 m/min X/Z axis cutting feed rate: 0.0015-5,000 mm/rev

Additional information: Wheel size: Aluminum wheel: 14-22 inches Aluminum wheel height: 12 inches