Tos FSGQ 80 bed type milling machine center

Tos FSGQ 80 bed type milling machine 

FSGQ 80

BED TYPE MILLING MACHINE (MACHINING CENTRE)

TECHNICAL PARAMETERS

- Longitudinal table clamping surface:
  - Width: 800 mm
  - Length: 2,000 mm
  - Table height over basis: 500 mm
  - Max. table load: 3,000 kg/m2

- **Working stroke:**
  - Longitudinal direction X: 2,000 mm
  - Cross direction Y: 900 mm
  - Vertical direction Z: 800 mm
  - Feed range in axes X, Y, Z: 5-20,000 mm.min-1
  - Range of spindle speed: 20-4,000 rpm
  - Control system: HEIDENHAIN, SIEMENS, FANUC, etc.
  - Main motor usable output: 19.3 kW
  - Machine overall input: 30 kVA
  - Machine weight: 8,500 kg
  - Drum-type tool magazine
    - Max. number of tools in magazine: 20
    - Tool diameter in magazine: 120/240 mm
    - Max. tool length: 300 mm
    - Max. tool weight: 20 kg

**BENEFITS**

- Fixed "O-type" spindle head, automatically re-adjustable in two planes HN, turning around cross axis (B) automatically to 90° by 2.5° max. speed 4,000 rpm, automatic exchange of tools, HSK-A63 taper.
- High-pressure inside (axial) tool cooling (20 bar/30 l.min) + external low pressure tool cooling with possible switch-over, common coolant tank
- Simple design
- Small built-up area
- Stability, rigidity
- Multi-purpose "O-type" spindle head

---

**FSGQ 80A**

*BED TYPE MILLING MACHINE (MACHINING CENTRE)*

**TECHNICAL PARAMETERS**

- **Table:**
  - Table width: 800 mm
  - Table length: 2,000 mm
  - Table height over basis: 700 mm
  - Max. table load: 3,000 kg/m

- **Working stroke:**
  - Longitudinal direction X: 2,000 mm
  - Cross direction Y: 900 mm
  - Vertical direction Z: 800 mm
  - Feed range in axes X, Y, Z: 5-20,000 mm.min-1
  - Machine overall input: 35 kVA
  - Control system: HEIDENHAIN, SIEMENS, FANUC, etc.
  - Machine weight: 9,000 kg

**Headstock with "S-type" spindle head with interchangeable spindle**

- Work spindle with mechanical drive
- Spindle taper: HSK-A 63, 150 50
- Spindle speed: 20-4,000 rpm
- Max. torque: 1000 Nm
- Main motor usable output: (S1/100%): 19.3 kW

**Electrospindle**

- Spindle taper: HSK - A63
- Spindle speed: 6,000-15,000 rpm
- Torque at 6000 rpm (S1 / 100 %): 28.6 Nm
- Usable output (S1/100/0): 18 kW

**Drum-type tool magazine**

- Max. number of tools in magazine: 24
- Tool diameter in magazine: 77/150 mm
- Max. tool length: 350 mm
- Max. tool weight: 6.5 kg

**BENEFITS**

- Up to six axes machining possible
- Speed up to 15,000 rpm
- Maximum versatility
- Cabin execution
- Axial tool cooling up to 30 bars

**FRFQ 200/250/300**

*GANTRY TYPE MILLING MACHINE (MACHINING CENTRE)*

**TECHNICAL PARAMETERS**

- **Table clamping surface:**
  - Width: 2,000/2,500/3,000 mm
  - Length: 4,000-16,000 per 2,000 mm
  - Max. table load: 6,000 kg/m2

- **Working stroke:**
  - Longitudinal direction: 3,000-15,000 per 2,000 mm
  - Cross direction: 2,800/3,300/3,800 mm
  - Vertical direction: 1,100/1,250/1,500 mm
  - Feed range:
    - Longitudinal, cross: 1-15,000 mm.min-1
    - Vertical: 1-12,000 mm.min-1
  - Control system: HEIDENHAIN, SIEMENS, FANUC, etc.
  - Main motor usable output: 37 kW (not applicable to VKE spindle head)
  - Machine overall input: 60 kVA
  - Machine weight: 49,000-90,000 kg
  - Chain tool magazine
    - Max. number of tools in magazine: 60
    - Tool diameter in magazine: 130/250 mm
    - Max. length: 340 mm
    - Max. weight: 25 kg

**BENEFITS**

- Optional exchange of spindle heads
- Small built-up area with max. table length
- High productivity
- Five-side machining
- Traditional product
- Working area division
- Active inspection
- Thermal stabilization of three-step gearbox and spindle drive chain at spindle heads

---

**RUQ 200/250/300/350/400**

*MILLING MACHINE (MACHINING CENTRE) WITH MOVABLE PORTAL*

**TECHNICAL PARAMETERS**

- **Working stroke:**
  - Longitudinal direction X: 4,000-25,000 (per 1,000 mm) mm
  - Cross direction Y: 3,900/4,400/4,900/5,400/5,900 mm
  - Vertical direction Z: 1,250/1,500 mm
  - Column to column distance: 3,350/3,850/4,350/4,850/5,350 mm
  - Distance between clamping table surface and crossrail: 2,200-3,200 mm

- **Clamping plate:**
  - Width: 2,000/2,500/3,000/3,500/4,000
  - Length: 4,000-24,000 (per 2,000) mm
  - Number of "T" slots: 15
  - "T" slots pitch: 200 mm
  - Max. load: 6,000 kg/m2

- **Feed range:**
  - In X axis: 1-20,000 mm.min-1
  - In Y axis: 1-15,000 mm.min-1
  - In Z axis: 1-12,000 mm.min-1

- Control system: HEIDENHAIN, SIEMENS, FANUC, etc.
- Machine overall input: 100/140 kVA
- Main motor usable output: 30/60 kW
- Machine weight: 30,000-120,000 kg
- Chain tool magazine
  - Max. number of tools in magazine: 60
  - Tool diameter in magazine: 130/250 mm
  - Max. length: 340 mm
  - Max. weight: 25 kg

**BENEFITS**

- Separate clamping surface
- Two-spindle design possible
- Exchange of 60 kW spindle heads
- Working area division
- Small built-up area at max. table length
- Axial spindle head cooling
- High productivity
- Interchangeable spindle heads for customer's special technological applications
- Thermal stabilization of three-step gearbox and spindle drive chain at spindle heads

---

**FRPQ 200/250/300/350/400**

*PORTAL-TYPE MILLING MACHINE (MACHINING CENTRE) WITH TRAVELLING TABLE AND MOVABLE CROSSRAIL*

**TECHNICAL PARAMETERS**

- **Working stroke:**
  - Longitudinal table travel X: 5,500-13,500 (per 2,000 mm) mm
  - Cross axis Y: 3,800/4,800/5,800 mm
  - Vertical axis Z: 1,250/1,500 mm
  - Crossrail travel W: 1,250 mm
  - Column to column distance: 2,500/3,500/4,500 mm
  - Max. distance between clamping table surface and crossrail: 2,770 mm

- **Table:**
  - Width: 2,000-4,000 (per 500) mm
  - Length: 4,000-12,000 (per 2,000) mm
  - Max. load: 6,000 kg/m2

- **Feed range:**
  - In X axis: 1-15,000 mm.min-1
  - In Y axis: 1-20,000 mm.min-1
  - In W axis: 1-5,000 mm.min-1

- Control system: HEIDENHAIN, SIEMENS, FANUC, etc.
- Machine overall input: 150 kVA
- Main motor usable output: up to 100 kW
- Machine weight: 120,000-270,000 kg
- Chain tool magazine
  - Max. number of tools in magazine: 60
  - Tool diameter: 130/250 mm
  - Max. length: 340 mm
  - Max. weight: 25 kg

**BENEFITS**

- Multi-spindle design possible
- Machine rigidity
- Five-side machining
- Exchange of spindle heads with output up to 100 kW
-