Tos SKIQ vertical lathes

Tos SKIQ vertical lathes  The machine's frame and table bearings are designed to be rigid. The cross-rail guideways are specially ground and hardened to ensure the machine's permanent geometric and working accuracy. The machine's magazine has fifteen positions for automatic tool holder exchange. It can be equipped with a third controlled C-axis and live spindle drive. In addition to turning operations, the machine can perform high-efficient drilling and thread cutting outside the table rotation axis, milling of general shapes horizontally or vertically towards the table, and grinding of general shapes vertically towards the table. If the pallet exchange system is added to the machine for workpiece exchange, it will considerably reduce the idle time required for workpiece setup and alignment.

The ball screw enables the rail-heads to travel on the cross rail. The table speed can be increased in different CNC controls, with increased type execution. The machine can have a six-jaw hand-operated table, a four-jaw hydraulic self-centering chuck, or a three-jaw hydraulic chuck. Other available options include a side head, a ram with grinding equipment drive, rotary grinding wheel dressing equipment, a ram with live spindle drive, a third controlled C-axis, high-pressure or low-pressure tool cooling, coolant filtering equipment, rotary inspection equipment, front chip conveyor, chip collecting box, ecological protective guards, and exhaustion equipment. The machine can also have active workpiece checking, active tool checking, tool condition monitoring, direct linear measuring, workpiece exchange manipulation system, clamping device for technological pallets, electrical outfit for other voltage and frequency, and cooling equipment for coolant temperature stabilization. The manufacturer must be consulted for sizes 16-25. The type execution must always have active workpiece or tool checking. The workpiece exchange manipulation system can have two to four technological pallets, a rotary manipulation table, a rotary manipulator, and one to three storage tables.