Tos WVM vertical machining centres

TOS VANSDORF

Your partner for future machining

The new highly productive is a table gantry machine used for precise coordinate milling, drilling, and thread cutting. The is characterized by advanced technological level of design, high performance parameters, and the ability to meet the requirements of even the most demanding operations.

TOS VARNSDORF

Termination of the RAM by an interface for application of technological accessories
Ram size 
Main motor speed range 
Max. output of main motor
Max. torque on the driving shaft 1,500 adstock horizontal transverse traverse 
Spindle taper 
Max. spindle speed 
Max. transmitted power
Max. spindle torque
Basic increment for positioning of both dividing 1 planes
Range of rotation in the A axis 180°
Range of rotation in the C axis 180°
Table longitudinal traverse X mm
Width of the table clamping area
Length of the table clamping area
Max. workpiece weight
Size of the clamping T-slots
Spacing of the clamping T-slots. The ting Z axis is driven main spindle rotation drive is transmitted from a powerful electric via a ball screw with pre-loaded drive via a robust two-speed gearbox with automatic shifting. nuts. The X and Y axes are driven via a rack and two pre-loaded pinion pairs controlled by a Master-Slave system. Balancing ram weight is compensated hydro-mechanically with a hydraulic cylinder using a standalone hydraulic Y unit. Automatic tool exchange It consists of a chain tool magazine, a manipulator guideway on the stand, and a custom manip- ulator that allows the tool to be exchanged in the milling head. Guiding of movable groups Linearly traversing groups of the machine axes are guided using linear roller guides. Bed guideways are Machine frame covered with telescopic steel The frame consists of a bed with a traversing table, above which guards. A crossbeam guideway a transversely housed headstock moves on the crossbeam that is is protected by folded fabric attached to two vertical stands. All the frame parts are designed as bellows. rigid and optimally sized castings.