Toshulin powerturn vertical lathes

Toshulin POWER TURN VERTICAL LATHES. Variable conception of the tool exchange. This tool exchange is provided by the disk tool magazine or by the chain tool magazine. The progressive tool exchange way allows to cover the customers' wishes in a wide range, regarding the tool number or places in the magazine as well as regarding the application of any optional tool system type. The machines can be equipped with many various tool types - beginning with tool holders for conventional tools of 40 x 40 mm and finishing with the automatic exchange of cutting heads specified for turning operations, types Sandvik Capto C6, C8, or Kennametal KM 63, 80 and Wídia - Valenite UT 63. When machining is performed with live spindles, the customer can use the automatic tool exchange with tool types ISO 50 40, CAT 50, HSK 100 or Sandvik Capto C5. The new tool exchange method has been patented in abroad. Quick and reliable tool exchange. Application of any optional tool system type. Ram extension up to 1500 mm and ram cross section of 240 x 240 mm provide perfect rigidity also during high-efficient machining. Tool cooling through the tool middle using pressure coolant. Entirely closed machine working area. The machine can be equipped with the third controlled C-axis and with the live spindle drive. In addition to turning operations, it is possible to perform: High-efficient drilling and thread cutting also outside the table rotation axis. Milling of general shapes horizontally or vertically towards the table. Grinding of general shapes vertically towards the table. If the machine is completed with the pallet exchange system serving for workpiece exchange, it will considerably reduce the machine idle time necessary for workpiece setup and alignment.

Tool Table Cross rail Rail head Ram Chain tool magazine Control panel Pallet Rotary manipulation table Storage table 10 Workpiece Filtering equipment Cooling equipment Exhaustion equipment Elevating chip conveyor

Different CNC control Increased type execution Increased table speed High table speed Six-jaw hand-operated table Four-jaw hydraulic self-centering chuck Three-jaw hydraulic chuck G according to the customer's wish Side head Second rail head Second disk magazine for 31 tools Second chain magazine for 96 tools Rotary grinding wheel dressing equipment Ram with the live spindle drive Third controlled axis C-axis High-pressure or low-pressure tool cooling Coolant filtering equipment Rotary inspection equipment Front chip conveyor Chip collecting box Ecological protective guards Exhaustion equipment Active workpiece checking Active tool checking Tool condition monitoring Direct linear measuring Workpiece exchange manipulation system Clamping device for technological pallets Cooling equipment coolant temperature stabilization Electrical outfit for other voltage and frequency

For the machines with the disk magazine only 2> For machine sizes 1600 - 3000 this must be consulted with the manufacturer 3> Tool magazine will be located on the left machine side 4> Always at the type execution with the active workpiece checking or active tool checking 5 With two up to four technological pallets, rotary manipulation table, rotary manipulator and one up to three storage tables.

The original leaflets are for sale. A preview is shown. The price of the leaflet is on request.