Tracto Technik tubomat 642 Hydraulic tubing

The TUBOMAT 642 perfectly manages all steps of hydraulic tubing. Complete and proof processing of hydraulic tubes The pro for hydraulic tubing: TUBOMAT Precondition for a reliably functioning hydraulic system without leakage loss is the equally reliable processing and assembly of all pipes and components. Meanwhile, TRACTO-TECHNIK has been developing professional and workable solutions for hydraulic pipework for four decades and offers the different processing functions individually in form of compact tabletop units or integrated in the TUBOMAT pipe processing center. With the TUBOMAT 642 and 648, TRACTO-TECHNIK offers two real all-round professional solutions for hydraulic assembly concerns. The mobile and flexibly applicable pipe processing center for pipes and tubes with outer diameters from 6 to 42 mm resp. 48 mm manages the complete hydraulic tube processing spectrum from sawing and deburring to bending and also integrates pipe flaring, cutting ring assembly or chamfering functions. This assembly pro is extremely robust, easy to operate, and absolutely reliable. Since its development 40 years ago, the TUBOMAT has proven its own value as a universal pipe processing machine over a thousand times all over the world, thus turning into an indispensable assistant in pipe TUBOMAT 648 N production for many enterprises. sawing function. Cutting ring assembly. Deburring, Flaring, Cutting Ring Assembly: TUBOGRAT, VARIOMAT, TRACTOPRESS All single processing functions are also available from TRACTO-TECHNIK in the form of small and compact high-performance machines. Clean deburring is carried out by the is sufficient to press the sawed-off pipe ends against the special pipe milling cutter and within seconds the pipes are absolutely free of burrs. TT provides individual assembly devices for the two methods of safe hydraulic component connection, flared or cutting-ring fittings. TRACTOPRESS is a superior solution for quick and fault-free cutting ring assembly; the specific assembly pressure for every pipe diameter is set up automatically with the application of the corresponding tool. The combined assembly machine VARIOMAT performs cutting-ring assembly and also flares the ends of the pipe. A change of the two functions is performed in a matter of seconds; therefore, this device is particularly suitable for applying both fitting methods.