Trepel EN-CL lifting table

The EN-CL Euro Norm Cargolift has been specially designed for loading purposes. Within a matter of seconds, this lift system safely lifts each load up to the desired lorry. The lifting table allows for quick height adjustment without any harm to the goods being loaded and unloaded. The platform remains absolutely parallel while being raised and lowered, thus guaranteeing safe transfer of the load. Safety rails are an optional extra. All surfaces are steel-grain coated grade SA. Traversable segments are optional, either hydraulic or mechanical. Safety contact bank and a safety contact bar ensure a safe working environment. Stable scissors provide beams of uniform strength. Maintenance-free bearings. Corrugated wire guards are optional for underflow protection. Heavy-duty torsion yokes. Compact hydraulics with all safety components according to EN 1570. A non-bending frame connects the scissors with a non-bending frame. Double safety high-roller mounted pressure cylinders with anti-friction bearings. Technology at higher levels replaces expensive structural ramps.

With the EN-CL, you load directly from the factory hall or from ground level onto the waiting truck. This eliminates the need for expensive structural ramps. When retracted, the EN-CL disappears, becoming flush with ground level, and therefore can be traversed from all sides, even by the heaviest of lorries. As such, you also save on space.

Lifting table for handling different trucks. Side and rear truck loading. Technology at higher levels. The loading device that never goes on strike. The EN-CL is available direct ex works. Quickly installed, it is immediately ready for operation. As of tomorrow, you too could enjoy faster, safer, more rationalized loading by joining the ranks of those freight companies who already take these benefits for granted.

When retracted, the lifting table is traversable from all sides. Loading with a lift table and loading tailgate. Loading table built into a fixed dock ramp. Loading round corners with a combined lifting table and dock leveler. Standard table with roll-away retention and transfer segment. Technology at higher levels. Transfer point for all freight goods. Traversable ramps, slot-in rails, and hand/foot push buttons are just some of the features that make the EN-CL the perfect loading device. Personal safety is ensured by special foot protection contact bars, while brake valves and several valve lift stops afford additional safety precautions described by the inspecting bodies as exemplary. Needless to say, it is maintenance-free and absolutely reliable in its functioning.

Type Lifting capacity Lifting height Platform size Collapsed Lifting time daN mm mm height mm sec (subject to technical improvement)

Loading accessories Traversable segments Chain curtains Safety rails

Successful loading requires exact positioning of the platform level with the loading sill of the truck. These traversable segments, which are divided into several flaps, adjust to meet the bed width and lateral inclination of any lorry. Able to swing upwards either mechanically or hydraulically, they also serve as a safeguard against industrial trucks rolling away unattended.