Twin Seam KA 1500 forming machine

TWIN SEAM COMPANY A/S TYPE KA 1500 forming machine - Shopmaster High effective production of rectangular straight ductwork for a low investment The machine works without loss of raw material and can be run by one person only. This production line is designed for smaller and This machine is of first quality like our other medium sizes of workshops which want to pro- machine palet. All functions are fully hydraulic duce rectangular ducts and straight cuts from driven, which secures a very long lifetime and coils with a max. width of 1500/2000 mm. a trouble-free operation. The production of ductwork is made from The machine can be programmed directly at coil which is fed into the combined the keyboard or remote via CAD-system. straightening and profiling unit. Only 1 operator is needed for controlling the The machine control system takes care of production process. executing the orders in the correct measure- ments and continuously shows the production 99 different duct dimensions or programs can status on the monitor. be stored in the machine at the same time. The machine produces the full range of The operator just controls production and ductwork programs, for instance full box retrieves the ducts from the machine. section, U-shape, L-shape, straight cut with or without stiffen TWIN SEAM COMPANY A/S DUCT FORMING MACHINE KA 1501 - AUTOSELECT RECEPT EDIT Slitting unit for longitudinal cutting of the coil Automatic punching unit for punching holes material. for reinforcement stays. Can be delivered with 1, 2 or 3 sets of slitting knives. Semi-automatic coil selector with supports for easy change between different measurements in the material thickness and widths. The Semi-automatic coil selector can be Notching unit for automatic notching of corner delivered in versions for 2 or 4 uncoilers. seam and seam notches. In order to make the input and processing of data, as easy as possible, Twin Seam has developed a new data entry and processing software package. By using this software package, you need only one PC and one program, for both straight ductwork, blanks, and fittings. After entering the data, the software package will sort, process, and transmit the needed information receipts to the KA 1500 duct forming machine, and the TS-plasma cutting Network connection of duct forming machine and machines, as necessary, for production. TS plasma cutting table to central PC-Computer. Industrial multiprocessor control system Automatic punching tools for reinforcement for easy and trouble-free operation. ment/bars. Up to 99 orders can be stored in the Automatic notching units for corner seam machine at the same time. and seam notches. One man operation. Slitting unit for longitudinal cutting of the Automatic execution of production without coil material. help from the operator. Remote data input and list printing via PC. Network connection to Plasma cutting Up to 4 decoilers. table. Attractive price/performance ratio. High capacity max. 8 tons ductwork per 8 is the leading supplier of automatic hour shift. duct production lines in Eurole. Semi-automatic coil selector with support for easy change between different material dimensions Material specifications STANDARD OPTIONS Max. Coil width mm. 1500 2000 Number of coils 1 4 Max. coil weight kg. 2500 6000 Max. Thickness mm. 1.1 400 N/m² 1.25 400 N/mm² Min. thickness mm. 0.5 Dimension of largest Duct mm Dimension of smallest Duct mm. 140x140 Min. L-Duct mm. 100 120 Min. length of duct mm. 500 Beading/section Reinforcement profiling standard Z-profile or Trapez Trapez-Profilíng Output capacity Production time for average Duct 40-50 sec. 400x400 mm Electricity Power consumption KW 3.5 4.0 Electrical connection VAC 3x400,50 HZ, 0, earth As per request Arrangement Floor area required m² 8 14 Weight kg. 3000 4100 Technical data subject to revision without notice The Twin Seam Shopmaster production line is 1 Combined cutting and bending unit. a modular system and can be configured according to customer requirements. 2 Straightening and profiling unit. The basic KA 1500-Shopmaster consists of the 3 Specially designed industrial multiprocessor following modules: control system for entering orders and controlling the machine. 4 1 decoiler for max. 2.5 tons weight. Microprocessor Computer. Operators keyboard. Automatic rectangular duct forming machine type KA 1500-3000 Automatic flexible duct forming machine TS 580 Feeder for plasma cutting system. FE 1500-2000 Automatic rectangular duct forming machine type KA 1501 A4. Automatic rectangular duct forming machine type KA 1500 Shopmaster.