Ungerer cut to length lines

Ungerer HIGH EFFICIENCY CUT TO LENGTH LINES
Leveling ungeger leveling within half the tolerance under the DIN requirement for precision leveling; with or without intermediate rolls high or 6 high
Quick change cassette infeed system
Strip infeed with Wide range leveling telescopic table capability strip feeding and optional features: bending unit
planomat process optional features:
guidance system pre roller leveling roll cleaning
Leveler device
Planomat Crop shear
Scale removal system cassettes with different leveling roll diameters
Spray mist system
Edge trimming strip pre-centering
Fully automatic adjustment
Decoiling for strip width edge trimmer with fully precision strip guiding automatic adjustment for using strip center strip width control
Long tool life
Cantilever or twin optional features: head mandrel fully automatic adjustment 
Optional features: overlap based on strip
Leading end peeling parameters bending device slitting for multiblanks
Paper winder
Slitting shear with quick

Edge Trimming
Strip pre-centring
Fully automatic adjustment for strip width
Edge trimmer with fully automatıc adjusfment for strip width
Long toollife
Optional features:
Fully automatic adjustment of knife clearance and knífe overlap based on strip
parameters
Slitting for multiblanks
Slitting shear wíth quick knife change system
Notching system for edge trimmer
Scrap conveyor with scrap sorting facility
Scrap winder

stacking
Accurately aligned stacking
On multi position stacker changeover without interruption
of production flow
Optional features:
Multi position stacker
Stacking posítíon for second quality 
Weighing unit
Automatic pallet infeed
Automatic pallet outfeed

From Coil to Sheet
The ungerer programme of cut to length lines is made up of a comprehensive range of highly efficient epuipment for levelling and cutting to length metal strip of all kinds, starting from coil. Short changeover and down times, ease of operation, minimum maintenance requirements and low operating costs are characteristic features. For you, as cut to length line operator, the equipment offers consistent quality, flexibility and economy in operation, guaranteeing satisfaction for the end user and your long term success.

Cutting to Length
Length tolerances possible
Automatic knife clearance adjustment
Change in length without interrupting production flow
Optional features:
Cassette system for knife change
Closed length control loop in conjunction with ungerer
contactless dimension measuring system
Process visualisation and order administration

Conveying Section
lnspection zone 
Optional features:
Scrap diverting guide
Stamping device
Ink jet printer
lnspection mirror

Materials
Hot rolled and cold rolled steel
• Aluminium
• Stainless steel
• Copper
• Brass
• Coated and galvanised strip,
• Tinplate
• Ranging from soft copper alloys up to high
strength stainless steel and other alloys. High efficiency roller leveller with cassette change system and Ieveling roll cleaning device. Recoiler with strand separation
paper interleaving device. Edge trimming shear with edge strip channel. Scrap cutter with feeding unit
lnfeed section. Twin-head mandrel decoiler with peeler, bending and feeding unit

Pre-Roller Leveller with infeed pinch rolls loading
• Automated coil loading and unloading optional features:
• Turnstile
• Coil caг
• Coіl strapping station

Crop shear with scrap diverting guide

Matched to customer's
requirements
The concept and layout for your cut to length line is established in joint consultation to meet your needs, your material, your production technology and site conditions. The line is built individually for you. On delivered lines, the modular system makes modification and extension easy, efficient and economical so that your cut to length line will continue to meet your requirements medium and long-term into the future. The individual machines are also ideal for
modernising existing lines.
Talk to us!

Automation and process control technology
Our in-house capability enables us to supply total systems to meet each individual customer's requirements precisely.
The control equipment can be in switch cabinet format or housed in an electrical container. The systems may be in the form of 32 bit technology for use with DC or AC
motors and we can provide complete process guidance systems using. The many systems supplied have demonstrated our ability to ensure consistent
and reliable operation, achieving maximum dynamic precision under all operating conditions. The result is a very high level of availability over many years. Our technology is designed to provide an easy to follow operator interface with the machine, covering display and recordíng facilities for start up and operation, and for fault indication and classification.

Quality Assurance 
Customers have long desired permanent monitoring and recording of quality and this demand can at last be met to the full. Our contactless length, width and diagonal measuring system which was developed especially for cut to length lines, measures every sheet and documents the result. Totally reliable classification to tolerance requirements and sortíng to different stacking positions can thus be achieved. Where it makes economic sense we assemble lines oп which different processes
are integrated in one combined strip processing line such as slitting cut to length etc. When the need arises we also offer and integrate special machines and processes
such as:
• Brushing
• Grinding
• Embossing
• Slitting multiblanking
• Strapping of sheets or slit rings
• Surface inspection
• Washing cleaning degreasing
• Oiling

The UNGERER Group develops and produces
production lines, machines and equipment for steel works and rolling mills, and also for independent service centers.
UNGERER is built on a foundation of 100 years of experience and development. By combining the best in mechanical engineering with state of the art in electronics and measuring technology, the group offers an ultimate in benefits for customers investing in innovation capabilities.