Victor Taichung Vturn P16 20 lathe

Victor Taichung an established ISO 9001 14001 company High Power Spindle with High Rigidity 11 kW 15HP for Vturn-P16 and 15kW 20HP for Vturn-P20. Double roller bearings NN type are used on Victor Taichung's own spindle to facilitate heavy cutting. Angular thrust bearings are used to absorb axial cutting force. The Spindle cover is designed with a 4-layer labyrinth seal to protect the spindle bearings. Encased in a heavily ribbed headstock for maximum heat 4-layer labyrinth design dissipation. Double roller bearing Angular thrust bearing Run-up Testing Victor Taichung's Own Spindle Assembly spindle and headstock are both in-house designed and manufactured in the air-conditioned assembly room to assure high quality and reliability. Every spindle has been inspected and tested with its own test record. Genuine Slant Bed by ONE PIECE Casting One-piece homogeneous Meehanite cast slant bed distributes stress throughout the structure. The Z-axis ball screw is mounted directly onto the slant bed P1 instead of the flat machine base P2, which minimizes the distance from the ballscrew to the turret enhancing the cutting stiffness. ball screw Genuine Pseudo By triangular carriage Dynamic Balancing GB Gauging Spindle Assembly Minimum Chip Build-up A Coolant flush onto the Z-axis cover reduces chip accumulation. The High volume L-shaped coolant tank reduces heat build-up enhancing machining accuracy. The coolant tank is removed from the front of the machine reducing the overall machine footprint. Spindle Output P1 30 min. in low winding s1 base RPM in low winding T1 30 min. in low winding1 base RPM in low winding single winding Low winding High winding Single winding Low winding Good for speed turning High winding Standard Accessories Ergonomic design for safe easy operation Fully enclosed guarding with the chip conveyor fitted into the machine bed ensures no access to the machine during operation and no coolant leakages. Hydraulic gauges on the front so they can be easily monitored during operation. Coolant tank is accessed from the front of the machine and High-pressure coolant by Grundfos SPK2-3 or MTH2-50/3 improves the machining quality on part surface. The oil skimmer option can be installed on the coolant tank to separate wasted lube oil from coolants. Electrical cabinet is equipped with heat exchanger for efficient heat removal. Reliable Power Chuck Hydraulic 3-jaw hollow chuck is foot operated for safe and easy operation. Manual Tailstock with Power Quill The robust cast tailstock with hydraulic quill provides positive engagement to minimize vibration. Tailstock is towed by the turret and moved to the specified location by rotating handwheel manually. Optional Accessories VICTOR-TAICHUNG Tool Presetter Renishaw No longer to perform tedious time-consuming cuts to determine tool geometry, the operator needs only to touch the tool tip to the tool presetter sensor to get the tool geometries not only reducing tool set-up time but reducing downtime due to tool breakage. Manual tool presetter MTP: Arm is rotated manually. Auto tool presetter ATP: Arm is rotated automatically by programming.

Parts catcher To enhance the machine's productivity, a parts catcher is available to work in conjunction with bar feed. This type of fully programmable parts catcher is mounted next to the chuck with a hydraulic actuator to rotate the extending rod bolted with the catching bucket which rests against the door of the machine during machining. Bar Feeder Interface For automatic loading of workpieces, the bar feeder provides a simple yet highly effective system. Interfaces are available on the Vturn lathes so that a number of different bar feeding systems can be worked in conjunction with the lathe for an efficient turnkey. Large Spindle Bore 66mm/4500rpm Through the new layout on the upgraded spindle bearings, Large Spindle Bore LSB for larger bar capacity 66mm is available on Vturn-P20 to reduce the expense and floor space demanded by an oversized machine. The spindle speed is even increased to 4500rpm because of bearing upgrade. Victor Taichung's Oi-TF Type 1 132i-B Control Specifications. Standard: ITEM SPECIFICATION DESCRIPTION Controlled Axes: Auxiliary Spindle Speed Function: DNC Operation Reader / Puncher interface is Required Accuracy Compensation: ONC Overhaul Job Memory Card PCMCIA Code Attachment is Required Backlash Compensation Rapid Traverse / Custom Feeds Program Number Search Std. 2. Stored Pitch Error Compensation Set, Sequence Number Search Set. Sequence Number Comparison and Std. Edit Operation: Buffer Register Std, Program Storage Length is not to exceed 1280m 512KB Oi-TF/32i-B Dry Run Std. 2. Number of Registerable programs per total 400 Oi-TF/32i-B / 1000 32i-B Single Block Std. 3. Part Program Editing Set, JOG Feed Std. 4. Program Protect Set, Manual Reference Position Return Set, 5. Background Editing Std, Manual Handle Feed 2 Unit / Each Path 8. Minimum Block Length Set. Oi-TF/32i-B, Manual Hole Feed Rate Set, X1O, X2O setting and display Interpolation: Status Display Set, Positioning GW 2. Clock Function Std, 2. Threading Synchronous cutting Std. 3. Current Position Display Set. 3. Multiple threading Std, 4. Program Display Program name 31 characters 4. Spindle Setting Std. Continued Threading Std. 676 5. Parameter Setting and Display Set Variable Threading Set. G34 6. Self-diagnosis Function Std, Wear Compensation G01 7. Alarm Display Set. Circular interpolation Oi-TF/32i-B, Multi-quadrant is possible Oi-TF/32i-B, Alarm History Display 50 0, 60 32i-B

VictorTaichung Vturn P16 20 cnc lathe  

Page switching G04. Operator History Display Std.

Help Function Set.

Automatic Mode and Part Counter Display Std.

Actual Cutting Feedrate Display Set.

Display Spindle Speed and T Code at All Screens Std, Feed: Dynamic Graphic Display Std. Available 1 MB by anchor option Rapid Traverse Rate Set, Spindle Setting screen Set, Rapid Traverse Offset Set. Display of Hardware and Software Configuration Set, Multiple-Language Display Set. Feed Per Revolution Set 699 mm/rev 18. Data Protection Key Set Tangential Speed Constant Control Set, 19. Erase CRT Screen Display Set, Cutting Feed Setting Method 20, Spindle Setting Screen Set, Cutting Acceleration / Deceleration Rapid Traverse: Linear, Cutting Ind, exponential 21. Color LCD / MDI Oi-T.