Voortman V320 drillíng and thermal cuttíng system

Voortman V320 drillíng and thermal cuttíng system

High-speed The drilling use of car provided with 1 changer. Lay numbers design are carried unit, by mil marking tool. Automatic outfeed system The combined drilling and cutting system can be equipped with an automatic discharge table and a product conveyor belt to enable a fully automatic process. Plasma Oxy-Fuel cutting units The combined plate processing systems are fitted with a plasma and/or oxy-fuel cutting unit. The high-speed positioning of the cutting torches is carried out using precision ball screws combined with servo-drives. The torches are suitable for the automatic cutting of shapes through a combination of the X-axis plate positioning device and Y-axis torch servo drives. The system is fitted with a high performance plasma cutting unit. This unit based on high-definition technology, aligns and focuses the plasma arc, improving arc stability and energy for more powerful precision cutting. Layout lines can also be marked on the plates by the plasma unit. V320C and V330C Combined plate processing system It is suitable for the Both these CNC controlled drilling and thermal cutting systems automatically produce tipped drills and its parts from large plates in one operation. These machines are suitable for the structural automatic tool steel fabricator and many other different industries. Combining the drilling and cutting jut marks and part process ensures high accuracy, flexibility, and productivity. Plate lambda to the plates but using the drilling ing with a special Nesting software The Voortman VACAM software, installed on the machine control system, is provided with its own CAD-editor to create new parts. This software program is also capable of manual plate nesting and bar nesting. For automatic plate nesting, the user can choose his own software program. These programs are able to read several standard file formats like DXF, DWG, or DSTV. With this nesting software, new plates as well as previously cut plates can be used for nesting. Partially cut plates can be stored in a plate library for later use. Servo-controlled plate positioning system The positioning device consists of a master gripper which clamps the plate at the back and a slave gripper for clamping the plate at the side. The advantage of clamping the plate at the side is that any deviation in the straightness of the plate will not be duplicated to the individual parts, shape, and hole positions.