YAM cnc lathe

YAM YAM-CNC Lathe  Yang Iron 

Yam-CNC 1000-D  Computerized numerically controlled lathe. 

Control Features: Tool offset
The highest stability is ensured by the adoption of íntegrated circuits. The control is provided with a 8 tool offset capacity which permits the operator
Combined usі of both incremental and absolute programming is possible. to dial in the difference between the programmed tool setup and the actual tool
not mere y with-in the same tape but even withirı the same block of tape. point there by compensating for tool length variations prior to starting work.
The prograniming zero point of the coordinate system can be established Too1 offset number and the corresponding offset value can be stored ınto memory freely by t ıe tape command. usirg MD unit on the the correction of oг .9995 in. Automatíc ycle caп be establisł.ed for turnıng and threading operations
íncludíng taper turning and taper threading. on two axes. the correct compensatior is automatically made as the tool face
indexed to the cuttíng position when the tape calls in the selected offset.
Feedrate Desıgnatíon
F22 for metrıc and F 14 for inch dırect command unit, Manual Control
Amount ef feed per revolution of spindle is dírectly dísignated from Manual pulse generator: For more increased effícíency in jog operatíon of the
to 40.75мм/геv or .0005 to toolslide the Manual pulse generator may Ьe furnished.
Oпe revolutíon of the handle generates 100 pulses and the tool slíde is traversed by the distance correspondıng to pulses generated.
Thread Cuttíng: Block delete:
Tapeг threading and scroll cutting are Well as straıght thread lgnores the predetermined portion of the program coded by a slash / , permitting
the different but simílar operatíons to be done by the same tape. cutting . Screw lead value direct command by G32 0г G33.
Return to Zero: Threads with a long lead rnetric mm, ınch This featrue has two function in. aгe available. 1. To confírm by a lamp indícatíon for instance the tool slide has return to the machíne
Zero posítion.
2. Automatícally to bring the toolslide back to the machíne Zero position.
SPECIFICATIONS OF YAM-CNC LATHE STANDARD SPECIFICATIONS
1. General Capacity Swing over 6ed ways 590mm 23Ya OF CONTROL UNIT Swíng over cross slíde 290mm 11
Dístance between centers 1000 , 39--
1. interpoiation Linear and circular
2. Head-stock Type of spíndle nose ASA A-1-6