Zayer TRERH gantry miling machine

Gantry

Technical Specifications
Moving cross mm
Table length mm
Table width mm
Distance between columns mm
Longitudinal travel mm
Cross travel mm
Vertical travel mm
Max. distance from table to spindle nose mm
Rapid feed mm/min
Working feed mm/min
Drives of X, Y, Z axis
H = Ball screw / Ø B = Ball screw / Ø mm
R = Rack / Module
Power kW
Speed of the spindle head min-1
Positioning and repeatability accuracy mm
Tool magazine
Allowed weight on the table kg
Approx. Net weight kg
Optional Accessories
Heads
45 Automatic head pos. 0.001
45 Automatic head 360 x 1 - 144 x 2.5
Direct outlet head
L shaped head
Extended L shaped head
TW1ST head
Movable quill Ø 175 x 500 mm
Change of heads
Chip conveyor
Coolant tank
Standard / Optional Not available
Two positions The 45 automatic head with positions allows increments of in head as in elbow to position the tool in any angle in the space.
Large machining Hydroelectric Aeronautic
Railway Dies
Automatic head rotation every 0.001.
Patented. Possibility to index the cutting tool at any position in the space. Easy to use and adjust by the operator. High machining performance. Machine design considering the environment. Elimination of residual oils by replacing greases. Weight reduction. Optimization of drives reducing energy consumption. Using cutting coolants without environmental impact. Automatic calibration of the head. Patent pending. Checking the head geometry at any time. Easy to use. Automatic compensation of the dimensions of the milling head. Checking the geometry of the milling head according to current standards. Interchangeability of different milling head variants. Possibility of incorporating other heads in the future. Guideways with linear roller packs with adjustable preload. Increased rigidity. Simplified geometric adjustment of the machine. Preload adjustment according to specific needs. Design of machines maintaining the geometry throughout the complete machining volume. Very accurate machine structure without the need for electronic compensations. Ram guided in the four sides. More rigidity. Symmetry: - Keeps the geometry. - Improves the dynamics. - Thermal balance.

Up to Up to
X: C-R/5 X: C-R/4
Y: C-R/5 Y: C-R/4
Z: H-B/50 2 ball screws / 2 ball screws.

1-30 1/min - 15 bar - 60 1/min - 5 bar
Due to the policy of continuous improvement and technological development, Zayer reserves the right to modify the technical and design characteristics shown in this catalogue without previous warning.

HEAD OFFICE
Pol. Ind. Betoño
Portal de Bergara, 7
01013 Vitoria-Gasteiz
Spain
: 945 26 28 00
945 28 66 47

DELEGATIONS