Zdas CTUA 2500 presses

Zdas Bulky Part
Making Presses
The equipment is designed to cold press the parts for the automotive industry. The CTUA 2500 press is of a vertical design with the
anchored frame. Located in the frame upper part are four working cylinders wìth synchronization of motíon of the outer cylinders. Position
of the slide is sensed by two contìnuous position sensors. The slide moves along the square adjustable guide. The press is provided with 
a locking mechanism to lock the slide in the upper position. The main part of the press drive is located on the top surface of the press
frame. The press is provided with the upper ejector and lower holder-ejector. The press is lubricated from the oi1 circulation lubricating
system.
The control system ensures the press control, diagnostics and signalling for other co-operating equipment.

Basic technical parameters
CTUA 2500 1
Rated force kN 25 000
Stroke mm 1 000
shut height mm 1 100
00 00
Approach speed 300
00 00
Working speed max. 16
Working speed 13 350 kN 31
Clamping surface of the slide mm 2 000 x 8 000/2 250 x 5 300
Lf Clamping surface of the table mm 2 000 x 8 000/2 250 x 5 300
Force of the lower holder/ejector kN 4 000
Stroke of the lower holder/ejector mm 300
Force of the upper ejector kN 380
Slroke of the upper ejector mm 250
Main electric motor power kW 200
Press ground p1an A x B mm 8 100 x 2 300

Press height C mm 9 400
Reference
The CTUA press has been supplied to
the company Gedia Nowa Sol in Poland,
to cold press the car parts.