Zimmerman FZH 400 HORIZONTAL MACHINING CENTER

ZIMMERMANN milling solutions FZH400
HORIZONTAL MACHINING CENTER

The specified dimensions refer to the FZH400 variant.

THE NEW HIGH-PERFORMANCE SOLUTIONFOR THE AEROSPACE INDUSTRY: FZH400.
The FZH400 Horizontal Machining Center is Zimmermann s most recent milling solution and bears the made
ín Germany quality table. The core technology is a robust, water-cooled travellíng column. Conventional designs have the drawback that lever effects cause their deviation to increase as the slide extends.
This is not the case with the innovative travelling column design of the new FZH400. With increasing depth of immersion into the material, the guide carriage distance grows and this leads to advanced rigidity.
The stepped drive guide ensures a perfectly constant geometry along the Z axis. This in turn guarantees maximum rigidíty in sensitive areas of the workpíece. Used in combination with the highly dynamic
Zimmermann milling heads, the FZH400 ensures an during the machining, of aluminum and composites - a basic prerequisite for economic workpiece machining.
The versatility of the patented M3ABC 3-ax ıs milling head improves efficíency due to the maximìzed materíal removal rate, in particular when machíníng structural parts. An integral standard component of the FZH400
is its pallet handIing capabílíty wíth an area for setting up pallets during machine operation. The newIy developed handling system permits the relíable transportation of the pallets, is suítable for longer pallet lengths, and can be extended without díff ıculty.
Pallet handIing standard vH30 2-axis milling head/ Innovative tnaveliing design λΛ3ABC 3-пxis milling head 
ZIMMERMANN
AT THE HEART OF THE FZH400:
OUR MILLING HEADS.
The FZH400 can be equipped with the VH30 2-axis milling head or the patented M3ABC 3-axis milling head as required. Both of these fork-type heads are designed as cast iron monoblock components. This design
ensures outstandíng temperature stabílity and possesses integrated oscillatíon and víbration dampingfor optimized surface qualíty and machining performance. Thanks to the zero-play drive mechanísm, the VH30 2-axis milling 1 head permíts hígh-precísíon posítioníng and repeatabílíty in the A- and C- axes.
The VH30 is designed for the HSC machíníng of aluminum and composíte materíals and maxímízes performance during volume machíníng. The versatíle M3ABC 3-axís milling head 2 possesses aп addítional B-axis and therefore has an even greater swiveling range. The M3ABC is immensely versatile and was specially developed for the machiníng of structural parts. 1t ís characterízed by maximum machiníng volumes, short throughput tímes and a hígh level of economíc effíciency.

TECHNICAL DATA FZH400. TECHNICAL DATA MILLING HEADS.
Working Ranges Milling Head VH30
X-axís 4100 mm 161 External Dímensíons Length x Wídth 500 mm x 650 mm 20 x 26
Y-axís 1 600 mm 63 Milling Head
Z-axiś 650 mm 26 Torque Rotary Axes in control A-axís: m п. 1 200 Nm 885 
Clampíng Pallet C-ax s: m π. 1047 Nm 772 ft 1b
Length x Width Heíght 4 100 mmх 1 600 mmх 250 mm clamped A-and C-axís: 3000 Nm 2213 ft 1b
163 x 65 x 10 Working Ranges VH30
Paliet Loading 4000 kg  гкS -+ 110
Threaded Sockets M16 , JК1S 225
Grid Dímensíon 200 mm x 200 mm 8 x 8 Dríves Rotary Axes VH30
Dríves - Línear Axes Rate of Feed A-, C-axís 360 /s 60 гpm
Rate of Feed X-axís 60 m/mіп 2362 ipm Acceleratíon A-, C-aźís 700 
Rate of Feed Y-, Z-axís 40 m/m п 1 574 pm Resolutíon A-, C-axis 0,0001
AcceIeration X-, Y-, Z-axís 6 rn/s2 236 in/sz
Automatíon Milling Head M3ABC
Y1-axis Liftíngaxis appгox. 2 200 п m 87 External Dimensions Length x Wídth 698 mm x 610 mm 27 x 24
Z1-axis Feedíngaxís appг mm 189 Míllíng Head
Number of Pallets 2 uníts Torque Rotary Axes in controI A-axís: m п. 825 Nm 608 ft 1b
Pallet Changíng T me appгox. 4 mínutes B-axis: min. 1 200 Nm 885 ft 1b
Connections Ports on the 1 x Vacuum Port C-axís: m  1 200 Nm 885 ft 1b
Pa 11et clamped A-axis: min. 2000 Nm 1 475 ft 1b
Safety Housing Safety Housing Pro[ec[ on Fence B-axis: min. 1 700 
and Safety Glasses C-axís: m п. 3000 Nm 2213 ft 1b
Líght Beam Sensors Workíng Ranges M3ABC
Pallet Changing Concept 1 x Set-up Unít A υxis 110
1 x Storage Unít B-axís t 14
C-axis 225
Drives Rotary Axes M3ABC
Rate of Feed A-axís 180 /s 30 гpm
8- and C-axis 120 /s 20 гpm
Acceleratíon A-, B-, C-axis 700 /s2
Resolution A-, B-, C-aźis 0,0001
Milling Spindle Fìscher
Spindle Power 51 100 74 kW 99 hp
SЬ 40 /2 min 78 kW 105 hp
Spindle Speed 30000 m n
0í1-Mist Lubrication
Torque S1 100 73 Nm 54 ft 1b
56 40 /2 min 92 Nm 68 ft 1b
Constant Power 51 100 10000-30000 m п
S6 40 /2mín 8500-30000 m п
Swivel Axis - 301 mm 12
Spindle Nose VH30
Swivel Axís - 331 mm 13
Spindle Nose M3A6С
Tool Ho1der HSK-A 63
Tool Clampíng Spríng C1amp
Tool Release Hydraulc
Coolant Supply Externaland
Through Tool