Zmm CU 400, 500 Universal lathe

UNIVERSAL LATHES  ZMM SLIVEN Ltd.                                            CU 400, CU 500

UNIVERSAL LATHES CU 400, CU 500

Models CU 400, CU 500 are modern Universal Turning Machine featuring high performance and easy operation.
In compliance with customer requirements these machines can be accomplished as metric or inch version and various power supplies.

STANDARD MACHINE SPECIFICATlON C U 400 C U 500
Distance between centres mm 1000/1500/2000
Slideways width mm 360
Maximum swing
Overbed mm 440 500
Overcrossslide mm 230 300
In gap mm 620 670
Workpiece machining length in gap
Face plate without jaws mm 240
Face plate with jaws mm 166
Spindle nose
D1N 55027 / CAMLOCK ASAB N8
Hole through spindle mm 62
Number of speeds 21
Speedrange г 20 = 2000
Number of longitudinal and cross feeds 120
Longitudinal feed range mm/rev = 12
Cross feed to longitudinal feed ratio
Number of threads 64
Metric thread range mm = 120
lnch thread range TP1 60 = 1 /4
Module thread range мм = 30
DP thread range TPP 240 = 1
Main motor kW
Carriage rapid traverse
Longitudinal traverse mm/min 3800
Cross traverse mm/min 1900
Turning tool cross section mm 32x35
Machine overail dimensíons
Length: Version 1000 mm mm 2435
Version 1500 mm mm 2935
Version 2000 mm mm 3435
Width mm 1185
Hight mm 1370 1420
Machine weíght wíth accessoríes
Version 1000 mm kg 2210 2280
Version 1500 mm kg 2360 2430
Version 2000 mm kg 2560 2630

MACHINE OPTIONS
1. Three-jaw, 10. ILLumination
selfcentering chuck, Ø 250 11. Centre plate
2. Drilling chuck, P20 12. Follower rest, Ø 15 - Ø 110 / Ø 20 - Ø 160
3. Live center, M5 13. Steady rest, Ø 20 - Ø 160
4. Face plate without jaws, Ø 400 / Ø 500 14. Steady rest 11, Ø 140 - Ø 280
5. Face plate with jaws, Ø 400 / Ø 500 15. Five-positioning limiter
6. Spindle guard 16. Carriage limiter
7. Tapeг ruler 17. Turning dogs hearts , one set
8. Thread repeatable accuracy device 18. CAMLOCK implementation
9. Cooling system