Doosan PUMA VT Turning center

Doosan PUMA VT series
PUMA VT450 / 750/900/ 1100 
Hígh Performance Vertical Turníng Center
PUMA VTseries 
PUMA VT450/750/900/1100
The vertícal turníng center is desígned for long term accuracy, heavy duty cuttíng and to minímíze floor space.
Its powerful spíndle drives, meehaníte casting and integral box guíde way províde unsurpassed rígídity.

New standard for unsurpassed high productivity, high speed, and high precision

Basic Mechanism

Robust Bed Construction
In order to assure heavy-duty machining and optimized chip flow, the machine base body is designed and streamlined. The small footprint helps you systematize your manufacturing plan plot in your factory.

Robust Column Construction
The wide hardened and ground boxways reduce vibration, promoting better tool life and surface finishes. The boxways are turcite-coated, which allows for 787 ipm rapid traverse rates. The balanced counterweight located inside the column neutralizes the gravity effect on the vertical and also conserves electricity and prevents turret drop during an emergency stop or power failure. All axis slides are induction hardened and ground to HRC 55 hardness. Long-term accuracies are very basic requirements on door-in-door products.
Three adjustable gibs on each axis slide are provided to maintain long-term accuracy and easy maintenance.

High-Performance Spindle Turret
The spindle is supported by a V12 turret and is ground to finish for double-row tapered roller zero accuracy. The turret has large bearings in the top and bottom of three-piece curvic couplings. The spindle, while angular, provides tremendous accuracy and heavy-duty radial load capability. The cartridge cutting can be achieved. The spindle is axially symmetric, and the 12-station turret holds ID or OD tools, providing very stable accuracy all day long, even when the spindle is heated up by continuous operation.

Chip Disposal and Conveyor
Rear chip conveyor
Chip air blow
Chip conveyor (Left, Right, Overhead) for chuck
Bed wash coolant
Flexible chip conveyor (Right/Left, Rear/Side)

Safety Cover Easy Operation
The swing arm on the main operation panel is a user-friendly feature to minimize the distance from part to operator’s panel during setup.
The narrow vertical panel is a space-saving design.
The handy sub-operation panel beside the door features double steel covers. Each spindle has cycle start, feed hold, emergency stop, and door open/close switches.

Accessories

Gearbox QP Auto Door Manual Tool Setter
Puma VT900 / VT1100 / Pneumatic Cylinder Removable Type, Renishaw

PUMA VT450
VT450 / VT450M / VT450-25P / VT450M-25P

Max. spindle speed: 2500 r/min

Motor: 30 min, 22 kW / 30 hp

Main Specifications

Travels (X/Z axis): 240 mm / 450 mm

Chuck size: 305 mm

Max. spindle speed: 2500 r/min

Spindle motor: Continuous / 15 min, 22 kW / 30 hp

Rapid traverse (X/Z axis): 20 m/min

Turret index time: 5 s

No. of tool stations: 12

Dimensions (L x W x H): 1445 x 2491 x 3009 mm

Machine weight: 6200 kg

PUMA VT750
VT750 / VT750M / VT750-25P / VT750M-25P

Max. spindle speed: 2000 r/min

Motor: 30 min, 30 kW / 40 hp

Main Specifications

Travels (X/Z axis): 385 mm / 760 mm

Chuck size: 381 mm

Max. spindle speed: 2000 r/min

Spindle motor: Continuous / 30 min, 22 kW / 30 hp

Rapid traverse (X/Z axis): 20 m/min

Turret index time: 6 s

No. of tool stations: 12

Dimensions (L x W x H): 1850 x 2785 x 3450 mm

Machine weight: 9700 kg

PUMA VT900
VT900 / VT900M / VT900-25P / VT900M-2SP

Max. spindle speed: 1800 r/min

Motor: 30 min, 45 kW

Main Specifications

Travels (X/Z axis): 470 mm / 850 mm

Chuck size: 610 mm

Max. spindle speed: 1800 r/min

Spindle motor: Continuous / 15 min, 37 kW / 45 hp

Rapid traverse (X/Z axis): 20 m/min

Turret index time: 6 s

No. of tool stations: 12

Dimensions (L x W x H): 2130 x 3050 x 3621 mm

Machine weight: 12500 kg

PUMA VT900 Series Power-Torque Diagram
Torque: Nm
Power: kW / hp
Spindle Speed: r/min

Machine Specifications Comparison

Standard Features

Coolant flushing for bed

Air blast for chuck jaw cleaning

Coolant supply equipment

Chip bucket

Full enclosure chip and coolant shield

Hydraulic chuck actuating cylinder

Hand tool kit, including small hand tools for operations

Hydraulic power unit

Leveling jack screw plates

Lubrication equipment

Soft jaws

Standard tooling kit (tool holders, boring sleeve, U-DN1 sleeve)

Proximity switch for chuck clamp detection

Work light signal tower (yellow, red, green)

Special chucks

Optional Features

Automatic door with safety device

Dual chucking pressure

Hardened ground jaws

High-pressure coolant

Manual tool presetter (removable type)

Oil skimmer

Belt type

Sure! Here's the corrected version of the provided content without dashes, numbers, points, and in English:

Controlled axes
X Z C Q X Z C Q X1 Z1 X2 Z2
Simultaneously controlled axes
5th 2 axes 4 axes 3 axes Q 4 axes
Backlash compensation
0 to 9999 pulses
Cs contouring control
O
Follow-up / Changing on-job
Axis Functions
HRV2 control
Least input increment
Stored stroke check
Overtravel control
Automatic operation memory
Buffer register
Operation Handle incremental feed X1, X10, X100
Search function Sequence No. / Program No.
1st, reference position return Manual
2nd reference position return G30
Reference position return check
Circular interpolation
Continuous thread cutting
Interpolation dwell
Linear interpolation
Multiple threading / Thread cutting retro
Polar coordinate interpolation
Thread cutting / Synchronous cutting
Feed per minute / Feed per revolution
Feedrate override 0 to 200 10 units
Feed Functions
Log feed override 0 to 2000 mm/min
Rapid traverse override R25/100
Tangential speed constant control
1st spindle orientation
Constant surface speed control
Auxiliary Functions
Spindle Functions
Multi-spindle control
Rigid tapping
Spindle speed override 0 to 150
Absolute / Incremental programming
Canned cycle for drilling / turning
Custom macro
Decimal point programming
Pocket calculator type decimal point programming
Direct drawing dimension programming
Manual guide I Conversational programming
Programming Maximum program dimension
Functions
Multi repetitive canned cycles 670-676
Optional block skip without hardware TØi9 Only NC function
Sequence number N5 N8
Programmable data input
Sub program call Nested calls 4 10
Tape format for FANUC series 10/11
Tape format for FANUC series 15
Work coordinate system selection
Auto tool offset
Tool monitoring system Øt. Opt.
Direct input of tool offset value measured
Tool geometry/wear compensation Geometry wear data
Tool life management
Func 7001 nose radius compensation
T-code function 72 digits
Tool offset pairs 64 64 32
Tool offset value counter input
Background editing
Expanded part program editing Copy, Move, Change of NC program
Editing Operation No. of Registered programs
Functions - Part program editing / Program protection
Part program storage length
Display of spindle speed and T-code at details screen
Help function Alarm Operation display
Setting Display Self diagnostic function
Servo setting screen / spindle setting screen
Tool path graphic display
I/O interface RS-232C
Data Input Memory card input and Output
Reader puncher control CHI interface
Ethernet function Embedded Ethernet function
Other Functions
MDI/DISPLAY unit color TFT LCD
PMC system

O: Standard
T: Option
t: Only M type
1: Standard
Part program length is different on export condition. On the addition of optional functions, its length can be reduced.

PUMA VT450 / VT450M / PUMA VT750 / VT750M
PUMA VT450-2SP / VT450M-2SP
PUMA VT750-2SP / VT750M-2SP
Note: Above tooling system is our recommendation. Depending on export condition, the standard tooling packed with the machine can be different.

PUMA VT750M / VT750M-2SP
Note: Above tooling system is our recommendation. Depending on export condition, the standard tooling packed with the machine can be different.

Milling System
PUMA VT1100
VT1100 / VT1100M
Max. spindle speed
850 r/min
Motor 30 min
60 kW Hp
Main Specification Working Range unit:mm inch
Travels X Z axis mm inch 580 / 1000
Max. working range
Chuck size mm inch 800
Max. Spindle speed r/min 850
Spindle motor kW Hp 45 / 55 / 60
Rapid Traverse X Z axis m/min ipm 20 / 20
Turret index time s
No. of tool station stations 12
Standard Machine dimension L x W x H mm inch 2850 x 3150 x 4120
Machine weight kg lb

Interference area
Main Spindle Power-torque Diagram
Torque: Nm ft-lb PUMA VT1100 with ZF Gearbox Power: kW Hp
Spindle speed