Durma PP6 12530 Multi tool punch press

PUNCH PRESS 
PP6 12530 Hydraulic Turret Punch Press
DURMA  Multi-Tool Punch Press RP6 12530
Rotation Multi-Tool Punch Press TP6 12520
PP6  2530 Multi-Tool Punch Press

The new model from Durmazlar has 6 stations and a 30 Ton capacity. The main frame is made of welded steel fabrication. All the tension points are designed with a large radius to prevent welding cracks, and the frame is fully stress relieved after welding. The X and Y axes are on linear guide ways and ball screws, with each axis controlled by a servo-motor. The electrical circuit components are supplied by Siemens, Telemecanique, and Merlin Gerin. The positional accuracy is ±0.1 mm. The hydraulic system components are supplied by Rexroth Bosch. The hydraulic seals are supplied by Merkel or Busak. During long periods of work, the multi-tool main housing, punch, and dies have an automatic lubrication system. The multi-tool is made of high-quality material.

The 6-station multi-tool reducers are used to convert to A, B, C, D style tooling. This machine can use Trumpf and Amada type tooling.

The Automatic Repositioning System allows punching in the clamp areas on long sheets of 2000+ mm.

RPB 12530 Rotation Multi-Tool Punch Press

The machine frame is of welded steel fabrication. The frame is fully stress relieved after welding. The electrical circuit components are supplied by Siemens or Telemecanique. The positional accuracy is ±0.1 mm. The hydraulic system components are supplied by Rexroth Bosch.

The Durmazlar Rotation Punch Press machine top and bottom tooling allow work to be synchronized to obtain all required angle punching and forming. It has a wide tooling usage capacity with 3, 6, and 8 tools multi-tool selection.

Programming time is minimized by fast programming with standard software.

TP6 12520 Hydraulic Turret Punch Press
INVEST in DURMA
TP6 12520 TO MAXIMIZE YOUR PROFITS.
With its high-tech TP6 Hydraulic Turret Punch Press, DURMA has embarked on the productive punching area with long-term durability and an affordable purchase price.
DURMA TP6 12520 offers you more profitable production capabilities in the market place through:

FLEXIBILITY, by an ideal tooling configuration for the Turret which includes indexable single tools for standard C and 2xB tools.

HIGH SPEED, high-speed ram drive, servo table drives technology delivers 600 HPM.

PRECISION, advanced ram positioning control by closed-loop hydraulic Bosch-Rexroth HNC-100, on table axes drive by Siemens Servo Motors acquire ±1 mm positioning accuracy.

LOW MACHINING COST, reduced maintenance by an automatic lubrication system of moving parts, ensuring maximum material utilization.

RELIABILITY, by its robust body frame, hydraulics, and control systems.

TP6 12520 Hydraulic Turret Punch Press - BODY FRAME
The 0-type body frame consists of two fully enclosed box fabrications. Finite element analysis with high-performance computers was used to simulate the design and minimize openings, twist, deflection, and shift of the frame. The frame body is also treated with high stress relief during and after the welding process. The result is a rigid frame that keeps vibration to a minimum, allowing greater precision in punching while substantially reducing tool wear and lowering noise levels.

TP6 12520 Hydraulic Turret Punch Press - TURRET
The turret consists of 27 stations as follows:

11 pieces A station (fix 6 mm to 32 mm)

10 pieces B station (fix 6 mm to 32 mm)

2 pieces B station (index 6 mm to 32 mm)

1 piece C station (fix 6 mm to 32 mm)

1 piece C station (index 6 mm to 32 mm)

2 pieces D station (fix 6 mm to 32 mm)

Tool change takes less than 3 seconds to complete the total turret movement and just 0.6 seconds for a single tool.
It is possible to process up to 2000 mm x 1250 mm sheets without the need to reposition.
Forming is almost at punching speed by a closed-loop hydraulic HNC-100 system by Bosch-Rexroth. A variable forming position ensures that the forming operations can be carried out with minimal stroke travel.

TP6 12520 Hydraulic Turret Punch Press - CONTROL SYSTEM STANDARDS
Siemens Sinumerik 840 D1 control system is applied for punching with a strategic alliance with Siemens. Controls and screen are mounted on a mobile control panel. The computer and other hardware are mounted in a separate cabinet. Machining can be started with just a few steps. Network Ethernet or RS 232, COM-Port connection is available as CNC activator as well as programming on the control panel. A UPS system protects the control unit from voltage fluctuations and power cuts.

OPTIONS

Tools

Tool holders

A station

B station

C station

D station

Additional clamps

Coated tool

Trumpf tool adaptor for D station

Different types of software options

Second activator dongle

Extra table

With the programming system, Durma provides a start-to-finish concept for flexible production, software, controller, and TP6 12520 precisely tailored to each other.

Steps to the NC program:

Generate import drawings

Sheet layout and automatic machining definition

Auto Nesting 3D

Automatic generation of NC program

DURMA TP612520 RP6 12530 PP612530
HydrauIic Turret Punch Press Rotofion MuNi TØ Punch PresMsuki TØ Punch Press
Working aгea mm 
Body Type 0 C C
Max Sheet Thickness St42 mm 6 5 6
Max Sheet Thíckness 1ndex Station St42 mm 3 5 -
Max Punching Force kN 20 30 30
Max Sheet Weight kg 100 100 100
X axis speed m/min 75 60 60
Y axis speed m/miп 60 50 50
X and Y lateral speed m/min 90 75 75
Max Ram speed HPM 600 600 600
Turret rotation speed rpm 22 50 multitool -
Auto index rotation speed pm 75 -
Toolings 27 stations 26-1 C indexable Rotation multi-tool with 8 or with 6 tools Mu1ti tool with 6 tools
Tool changing time for turret s 3 3 for multi tool 
Single tools
Positioning Accuracy mm
Repeatability Accuracy mm ,05 ,05 ,05
Control Síemens Sinumerik 840D1 Siemens Sinumerik 840D1 Siemens Sínumerík 840D1
Programable Work-Chute Max mm XØO - -

DURMA