Fagor CNC 200/300 control systeem

Fagor CNC 200 control system
MANUAL DATA INPUT
MICROPROCESSOR
CONTROL SYSTEM
CNC 200/300
MANUAL DATA INPUT
MICROPROCESSOR
CONTROL SYSTEM
CNC 200/300
APPLICATION
The AURKI CNC 200/300 ís a numerical control system desígned for use with almost all types of machine tool, combining a hígh level of automation and reliabílíty with simplicity and flexíbílíty of use at low cost.
CONSTRUCTION
The compact contτol ís fitted ínto a small metallíc casing and ís ready to Ьe easíly adapted to the machine pendant or to another part of the machine.
The use of microprocessors makes the integration of a wide variety of functíons possíble, consíderably reduces the number of electronic components and símplífíes the interconnection between the círcuits that make up the control, thus giving a wide range of features together with high operatíonal relíabílíty.

UNIVERSAL READ-OUT INDICATING:
Block number display
Axe
Auxiliar functions
Feedrate
Block oт pattern repeat
Miгтoг image
KEYBOARD Absolute
Inches
In position
Block content
FEEDRATE OVERRIDE CONTROL
Block by block
Automatíc
Manua1 . Data input/output
Manua1 pulse generator . 
Locate machine reference
MODE SELECT 5WITCH
DATA INPUT
The manual data input of the control by means of the keyboard makes it possible to directly programme the machíne, símplífyíng changes and correctíons.
The programmed data ís displayed on the front panel-of the control and, if desired, can be recorded
on magnetic or purıched tapes.
The input of programmes ínto the memory can also be carríed out by means of peripheral devices:
magnetíc tape reader or teletype.
The use of pattern repeat, mirror image functíon and tool correction gives the AURKI CNC 200/300
control a hígh programmíng capacity and símplífy its use.
An auto-test software displays any control damage or handling error by means of oodes.
Features Dimensions
STANDARD
0 5,5
Operatíon:
2 oг 3 axes point to point and straight liné 5 
Resolution: 5 or 10 іm x
Memory capacity: 296 blocks
Maximum programmed feedrate: mm/min. with F4 Y19Y 23Y2θ5
Program dwells.
M2 functions
Too1 lenght and radius corrections: mm.
Teach-in 
Inch/metτic conversion
Eггoг and diagnostic coded message
Linear or rotary transducers
Programatíon:
Format: Axes: N3 X/Y/Z
Feed and auxiliar functions: N3 M2 F4/N3 M2
M2 M2
Pattern repeat: N3 G3 G3 G2
L correction: N3 M X/Y/Z
R correction: N3 M XY/XZ/YZ 294 x 209
Absolute and incremental prograrnming
Subτoutines
Miтroт image by programming
d Alpha-numerique keyboard for data input

Physical and Environmental
Bui1t-in model
Weight: Kg.
Operating temperature: 0...45ºC
Operating humidíty:
E-PROM memory for the control instructions
Battery backup for memory
Mains voltage supply: 110/220 V в<,
Appгox. power consumption: 35 W
OPTIONs Maintenance
Memory extension up to 552, 808 or 999 blocks The AURKI control is provided with an auto-test
Linear interpolation system which detects any possible operational failu-
Threadcutting res. At the same time, the failures mentioned are advi-
Manua1 pulse generator sed by means of a numerical code displayed on the
Interface for magnetic tape, cassette editor or teletype readout. This feature, together with the design based
on connectable modular circuits, allorı a quick and
easy гepaiт of any possible breakdown.