Fagor CNC 8055 mc control system

FAGOR CNC 8055 MC
For Milling Machines
There ís nothíng so easy to operate, and wíth the features of an advanced CNC lntuitíve operatíon wíth no neeci for any programmíng knowledge.
lnteractíve graphic interface.
Manual and automatíc functíon on the basis of operatíons.
Minímízes set-up tímes for any síze seríes.
Extraordinary features and performance:
Avoíd calculations and errors when makíng any part. S Ø1ØØ0
FAGOR
There is nothing so easy to operate takes care of so many needs
For when you need to make your ρrototypes in the conventional way wíth minimum
set-up tímes.

F 0035Ø.Ø00  
Ask whatever you want of it
.because łhe CNC 8055 MC is a CNC for Mills which, due to íts versatility and capability, offers maximum features wíth absolute ease of operation.
Aпy operator, wíłh no prevíous knowledge of programmíng, caп łake caгe of aпy
need that arises wíth absolute efficiency.
All he/she has to do is key in the machining conditions and the geometríc data of the part.
The CNC 8055 MC for Mills and Machining Centers is the latest member of the FAGOR family of CNC s, vouching for our constanł evolution towards offering the user CNC s matching his own particular requirementś.
Its features mean that this new generation caп make handling even easier and offer an enhanced range of performance, which provide users wíth a CNC as eaзy to use
as a DRO.
por operatíon wíth no prevíous knowledge For any length runs by enteríng of programmíng, reducíng to a mínímum the data dírectly from a blueprínt set-up tímes and producing and wíth maximum łhe part step by step operatíng as ít ís being flexíbílíήı.
defíned. 
IOG Mode
In jOG Mode, the CNC 8055 MC shows the user all the information he/she needs on the screen:
Position of the axes.
Feedrate.
Spindle speed.
Tool selected.
Etc.
Allows the operator to carry out operations such as:
1. Coordínate preset.
2. Tool selectíon:
The operation is carried ouł by means of a help graphíc, in whích all that ís requíred ís to enter the data for the tool. 
The tool change can be effected wíth an automatíc toolchanger ATC or a manual one.
3. Spindle control.
4. Operatíon wíth JOG keys.
5. Too1 management:
Calíbratíon
This is a simple, intuitíve operatíon, similar to that whích can be carried out on a conventional machine. 
In this case, concepts such as tables, zero and tool offsets, etc.
do not have to be used. The tooI data can be entered directly into the help graphic.
The CNC is also able to pick up data such as the length etc.
by itself. All you have to do is place the part, give its dimensions, and bring the tool ín until it touches.
FAgOR
6. Operatíon wíth hanciwheels: R
With the CNC 8055 MC up to 3 handwheels can be used, which means that this machine is just as símple to use as a conventional mill. There are several possibilities, as it ís possible to vary the resolution of the handwheels depending on the work that is being done:
High resolution for precise, careful movements tool calibration, positionings, etc. .
Low resolution for fast moves too1 withdrawals, etc. .
There is nothíng so easy to operate when carryíng out
Automatıc Operatıons The automatic cycles used aгe the main dístinctive aspect of the
CNC 8055 MC. These have been designed to adapt themselves to the usual working methods of a shop: when making a part, its machining procésś is divíded into a cerłain number of operałions.
These operations are easily identifiable on the operałor control panel, as each oпe of them is represented by icon keys that have an LED to verify whether or not they are actívated. 
In this way, the keyboard itself provides clear and precise information to the user on machining conditions and, at the same time, mínirnizes possible accidental errors.
On the monitor, through graphic interactive data entry, all of the characteristícs of the operation can be displayed in the graphic assistance at the same time as the corresponding data is entered.
It is also possíble to defíne the roughing and fíníshing conditíons for each cycle.
There are different operatíng levels so the operator can choose the options that best meet hís needs at any time. These LEVEL
CYCLE levels are selected by means of an addítional key.
The user can simulate each operatíon that has been ínput, in order to make sure it runs properly.
An attempt has been made to make the interface as understandable as possible, by using explanatory names and texts in simple and direct terms.
These texts may bé modifíed at any time, even by the user himself, to make them even more understandable to a particular operałor.
The CNC 8055 MC affers the followíng automatíc operatíons: 
 Surface míllíng
For thís operation, tñe values avaílable from łhe blueprint of the part are entered directly.
WY
2 External pockets bosses : rectangular or circular.
3 lnternal pockets:
rectangular oг circular
5 Z Machíníng patterns
Dríllíng. Center Punchíng. Boríng.
Threading Reamíng.
and rigíd tapping .
4 Z Machining patterns, assocíated wíth posítíonings
Poinł to point. Straíght line. Circular pattern.
Gríd pattern. Rectangular pattern.
There is nothing so easy to operate wíth
Profílíng Operations
It facílitates makíng any type of profíle:
Closed contours pockets with varíable 2D/3D profíle islands .
Millíng profíle cycles 1 and 2
Easy for the símple and complex part:
Simple profiles aгe entered in only one step.
Milling: Depending on the complexily of the part to be made Complicated profíles aгe solved with the help of an integrated
the miıling cycle offers several levels:
geometríc editor which automatically does all of the extra calculations. 1.- Profíle cycle 1
Sometímes ít might be necessary to calculate data prior to defined by points entering it for the operations themselves, due to undefíned To enter the shape of the part, all you have to do is know the variables in the blueprints, tangencies, etc. The smart profiledała of its theoretical corners up to a max mum of 12 points editor of the CNC 8055 MC saves the operator from having and the specific roundïng and/or chamfer condítions.
to do this.
The definition of the operation is completed by indícating the machining condítions for roughíng and finishing stages. 
All profiles can be machined directly, or saved in the control as oпe moгe operatíon to be carr ed out on the part.

All these operatíons can be simulated as they are entered,so A that the operator can check their operation before going on to make the part.
lrregular pockets with varíable 2D, 3D island 2.- Profiling cycle profíles: A totally interactive and powerful graphíc profíle editor is integrated ínto the CNC. Besídes directly drawíng the travel 
Allows definitíon of internal and external pockets wíth complex of the part to be machíned, it is possible to solve the undefined forms, using łhe íntelligent geometry ediłor fitted inło the CNC varíables łhat can come up. 
8055 MC. This powerful profíle editor ís able to solve any
undefined values arising automatically in the case of Thís edítor searches and calculates, in a way which is totally tangencies, for example apart from makíng the auxilíary transparent for the user, the possíble solutions according to the calculations required. known data, thus elíminatíng the need to recur to any additional calculatíng devíces such as a calculator, a PC in this cycle it is possible to edił an indefinite number of profiles
program, etc. at the same time.
This allows, after defining the pocket, creatíng external or internal pockets of smaller size covered within the main contour, doíng all thís in a single operation.

LEVEL CVCLE
High capacity for parts
Memory Storage
Any given part is made up of a certain number of operationš, The graphic simulation of a part allows ït ło be viewed before incIuding profiles. Thése parłs are stored in the control under a it is made, and the necessary measurements to verify that ił will number and comment which helps identify them. run correctly.
 Part-programs may consist of ćonversational operations as well The CNC 8055 MC e as 1S0-coded and High Level subroutines. The versatility of the has a high capacity
8055 MC even allowś combining IS0-coded and .. for parts memory
conversational subroutines in the śame part-program. storage, the only 
Parłs can be modified as many lines as it is necessarý, whether limit being that of
to change operation dała or to create a new part based on oпe the program
that aIready exists. memoгy itself.

Wíth addítíonal features to enhance its performance
The CNC 8055 MC also offers the following useful features: The 8055 MC also includes a11 the features of a słandard 
Machining simulation wiłh solid, 3D and tool path graphics. CNC 8055 M:
Powerful CNC for high-end mills, with great calculating power.
lntegrated PLC .
High Level and 1 O
programmïng languages.
Control of up to 6 axes.
Etc.
Other importánt advantages:
Cªп bé operałed by users
wiłhout prior programming
knowledge.
The set-up time for any size
run can be mŕnimized.
150 ond Hígñ Levei ianguage programmíng
Eaśy ło modify al eady
existing part-programs; it is even possible ło mix 8055 MC
operations with routines defined in ISO la iguage. 
Outside communićatïon by means of 2 DNC channelś, which allows for the loading and unloading of parts, programs, tables, pages of symbols and all Part Digitizing and Tracing. necessary information from a computer or between two CNC s.
Choice of different points of view and zoom for closer examinałion of any specifić śection of the part, thereby avoiding errors, reproceśses and, consequently, saving time
and money.
PLC Iogic onolyzer Programmíng graphiε assitance:
Interactive Editor
Technícal Characterístics
Mociular confíguraτíon
The 8055 MC is made up of three elements  :
which can be used in different places of the machine. These three elements aгe interconnected by means of cables, which cannot be longer than 25 m.
CPU: Available in two models:
- Width 3: Compacł , ideal for the great 8055 MC Operator panel.
8055 MC Central Unit. majority of industrial applications.
- Width 6: Extended with further space for three additíonal expansion cards, customized
1/O connections, SERCÓS digital interface,
There are six optións:
14 Color Monitor. 14 Co1oг Monítor with full
alphanumeríc keyboard. - 14 Co or wiłh alphanumeric 1S0 keyboard.
- 1 1 LCD Color.
- 1 1 LCD Color Monitor with
alphanumeric keyboard.
- 10 Coloг.
- 9 B W.
10 coіoг мoпiгoг. 9 Monochrome Monitor. 
Operator Panel:
Spécially designed to handle the
CNC 8055 MC. The Operator Panel is located in the most ćonvenient plaće for the
operator. Besides keys for Starł/Stop and for the movement of the axes, there are also
special keys for the Automatic Operations, aś well as an alphanumeric keyboard.
with ull alphonumeric
key6oard. 1 1 Co1or LCD Monítor. Dímensíons ín mm. ínches
8055 MC Coior LCD Mon to 8055 MC Co1or Monitór 14 8055 Color Monitor wíłh 150 Keyboard 10 8055 MC Co1oг Moniłor
Technícal Description
FEEDBACKINPUTS 8 for up ło 6 axes EDITOR, STORAGE AND
+S indle encoder MODIFICATION Of programs in 1 O and High Level
+EÌectгoníc handwheels languages
Of a cycle
ANALOG INPUTS 8 Of a part
ANALOG OUTPUTS 8 OPERATION MODES 10G
LINEAR INTERPOLATION Up to б axes símultaneously Cycle by cycle
Automałíc
CIRCULAR INTERPOLATION 2D MULTIPLICATION OF fEEDBACK PULSES Up to x25
RESOLUTION BY MACHINE PARAMETER Up to mm./
COMMUNICATIONS RS-232 C lnłerface V24
UNIVERSAL S1NGLE-PHASE RS-422 lnterface
POWER SUPPLY 85 = 265 VAC 2 DNC channels
AX15 FEEDRATE mm./mіп. up to 100 m./min. Load/download of:- Parts
MAXIMUM TRAVELS 99 mm./t 4000 - 1 O programs
- Parameters tables
- Pages and symbols
DIAGNOSTICS Errors: programmíng, executíon,
ínternal circuitry and over-temperature
lnterface errors: feedback servomotors,
MONITOR OPTIONS 14 Coloг external emergency acłivatíon
14 Coloг with alphanumeric keyboard Peripheral transmissíon errors
11 LCD Color lnputs/outputs status
11 LCD Color with alphanumeric keyboard Logic anaIyzer for PLC
10 Coloг
9 B W INPUTS/OUTPUTS 8 analog inputs t 5v 
6 analog outputs for axes t 10v
KEYBOARD OPERATION lcons wíłh LEDs on operation
Analog outpuł for spindle t 10v and function keys
Analog outpuł for live tool t 10v
GRAPHICS So1íd 40 digítal ínpułs optocoupled
Tool Paths 24 digital oułputs optocoupled
SIMULATION Simultaneous whíle editing: Up ło 255 subroutínes assocíated
- A cycle wíth M functiorıs
- A part BCD outputs for M4, S2, S8, T4
DATE/T1ME Permanent with battery back-up 1/O 24 VCC 40/24 Standard
104/56
168/88
232/120
COMPENSATION Leadscrew backlash
EDITOR lnteractive wíth graphic assísłance Leadscrew error
up to 255 points per axis
MANUAL OPERATION Movement 6y electroníc handwheek 3 Cross and skew compensation
lntegrated 10G panel wiłh keys for up to 3 tables ond 255 poinłs per axís
contínuous or incremental axís Too length, radíus, and wear movement
Feedrate/overríde switch
AUTOMATIC OPERATIONS Surface miIIing
External pockets bosses : rectangular or circular.
lnternal pockełs: Rectangular, circular, slots.
Posítíoníng: po ınt to poínł, ín straight line, іп circular, rectangle or gríd pattern.
Z machíníng patterns, associated with positionings: dríllíng, threadíng, center
punchíng, boring, reaming. 
OPERATI0NS WiTH PROFILES Pockets with varía6le profíle 2D, 3D islands.
Milling:
- Profíle defíned by sectíons up to 12 points.
- Profíle freely defíned by intelligent geometríc edítor profíle edítor Fagor shall not be held ,esponoible torany pnntlng or transcτibiпg errors in the catalóg and réserveś yhe right to
esake aciy ehenger to the ćhaгacteristics of its products wlthaut prioï rotioe