Fermat WRF horizontal boring mills

Fermat WRF horizontal boring mills  Diameter of Spindle Taper of Spindle option Max. Spindle Speed optionally optionally optionally Main Power Heidenhain or SIEMENS CNC S1/S6 Max. Torque Heidenhain or SIEMENS CNC S1/S6 Main Power FANUC CNC S1/S3 Max. Torque FANUC CNC S1/S3 X Cross Travel of Column Y Vertical Travel of Headstock Z Ram Travel W Spindle Travel Rapid Feed X, Y optionally , optionally optionally Rapid Feed Z, W optionally , optionally , T25 - T40 - T50 - T60 - Max. Table Load Table Size option tilting tables with 0-8 A large number of accessories are available. ACCESSORIES DETAILS 18 HEADSTOCK WITH RAM STROKE HEADSTOCK WITH RAM STROKE Rugged, powerful, precise. The headstock is made from cast iron GGG60 and equipped with a digitally-controlled servomotor turning the spindle, continuously regulating its rpm. Spindle travel W axis of 800 mm V130 and 1000 mm V150, V160, driven by a servomotor and ball screw. Clamping spindle taper SK50, BT, CAT or optionally B1G PLUS. Maximum ram stroke is 900 V130 and 1200 mm V150, V160. Ram stroke offers better access to workpiece while keeping rigidity. Ram stroke is controlled by servomotor with gearbox and ball-screw, on linear motion LM guideways. COLUMN COLUMN AND BEDS Rigid, tough, precise, designed to absorb vibrations during machining. Column frame, beds, slides, base, are made of reinforced cast iron GG30. Column is a massively constructed weldment. Maximum stiffness is achieved through annealing which leads to rigidity and firmness in metal-working procedures. Guideways and box ways are hardened 56 HRC. Movement of the headstock along the Y axis is achieved by multiple ball-screws - two for V130, Ø 100 mm, 2 brakes / three ball-screws for V150/160, Ø 80 mm, one brake with gear-boxes and servomotors. Column moves by rack and pinion drive on the X axis bed using large linear ways and carriages driven by 2 BEDS servomotors in MASTER-SLAVE configuration. Two linear positioning scales are also placed on column to further increase precision of the ram. CNC ROTARY TABLE AND CLAMPING PLATES Thanks to the simple design and excellent components, FERMAT CNC rotary tables require minimum maintenance and adjustments during their lifetime. The CNC rotary table consists of three main parts - bed, slide, and rotary clamping plate. The clamping plate is fit to a cross roller bearing that secures high load capacity, no stick slip, minimum friction. Table carriage moves on 2 linear motion LM guide-ways. CNC ROTARY TABLE AND CLAMPING PLATES For tables with travel of up to 5 meters, the travel is controlled by servomotor with planetary gearbox and ball-screw. Slides and clamping plate are castings. 2 servomotors with pinions provide the rotary movement on B axis, master/slave, no backlash. The rotary positioning of the table uses an absolute angle encoder increment of; the table is set in position, and held in place by hydraulic brakes. Clamping plates can be used for machining parts.