Fim Versafix 254,259 fixed angle notchcer s

Fim The fixed angle VERSAFIX 259 254 S VERSAFIX 254 - 254 S No blade gap adjustment is necessary from up to 4 mm thickness. This proven system allows sheets or varying thicknesses to be notched without the need for blade gap adjustment. Different material types including steel, brass, and aluminium can be notched with a constant blade gap. The rigidity of the structure and very long guides allow a very accurate notch with exceptional quality. SPECIFICATION STANDARD FITTING The Sp version has a very large iron work table Engraved brass metric rules with special features to enable a faster and more accurate notch. Squaring guides with reference holes for angles every 15 and with a 500 mm mobile 9 T slots 6 on the table and 3 all around to ledge. Fasten squaring guides or disappearing stops or extending bars. Cast iron working table. 2 extra long engraved 3 function brass Blades inching up and down. metric rules. Back gauge. 2 engraved 2 function brass metric rules for V Scrap box. notch measurements. Foot pedal. Greased for life. The fixed angle notchers compact rigid machines, suitable for heavy duty notches up to 6 mm thickness. Two hydraulic cylinders perfectly compensate the table deformation when cutting 6 mm, and perfect notches with no deformation of the workpiece are possible. The rigid structure of the notching head, long guides, double cylinders and the non-welded frame ensures long life and a good quality cut. Greased for life. Easy blade gap adjustment by using micrometer screws. SPECIFICATION DESCRIPTION Cutting Capacity Mild Steel 6 mm 6 mm Stainless Steel 4 mm 4 mm STANDARD FITTINGS The version has a very large cast iron work Engraved brass metric rules. table with special features to enable a faster and more accurate notch. Squaring guides with reference pin at 15 and with a 500 mm mobile ledge. 9 T slots 6 on the table and 3 all around to fasten squaring guides or disappearing stops or Cast iron working table. Hand/foot pedal operation. extra long engraved function brass Blade inching up and down. metric rules. Back gauge. engraved function brass metric rules for V Scrap box. notch measurements. Foot pedal. Greased for life. 4 spring holdown. ACCESSORIES These options make the operation easier and can be fitted on the machine at any time. EXTENSION BARS This extension is used to further extend the work area up to the maximum dimension of 1400 mm on the 254 and 256 and 3000 mm on the 254 S and 265 S. It can be mounted on either the right or left side of the table. OVERTURNING STOP Normally the overturning stop is inserted into the squaring guide slot to have accurate reference parallel to the squaring guide. DISAPPEARING STOP It is mounted into the  slot of the table or at the extending bar. SPECIAL ACCESSORY to be assembled only in the factory ELECTRONIC STROKE ADJUSTMENT with digital readout for quick adjustment of the stroke, further improving productivity and the versatility of the notcher.