G.B.C Challenge Plate bevellers

G.B.C Challenge 12 Plate bevellers 

Plate bevelling machine G8C, CHALLENGE 12, features a compact design to meet high portability demands across the working area. Once positioned on the plate edge, the machine automatically travels along the plate without any intervention by the operator.

The unit is a fixed head type, allowing bevel angles according to the roller assembly skid mounted only. Replacement of the 300 rollers supplied as standard for different bevel angle ones (available in 22°30', 25°, 35°, 37°30', 45°, and 55°) takes less than one minute.

Various types of milling cutters are available according to different steel grades to be machined.

- Voltage: 380V / 50Hz / 3Phase
- Bevelling Speed: 2.6 m/min (7.9 feet/min)
- Electric Motor Power: 2.2 kW
- Min. Plate Width: 60 mm (2.36 inches)
- Plate Thickness: 6-40 mm (1/4"-17.5")
- Std Bevel Angle: 30 degrees
- Weight: 65 kg

GBC plate beveling machine, CHALLENGE 15, is suitable for large plates as well as small strips. Once positioned on the plate edge, the machine travels along the plate automatically, without any intervention by the operator.

The highlight of the CHALLENGE 15 is the variable head, allowing the bevel angle to be changed in a few minutes without any additional accessory.

Close-up of the milling cutter working. Two rotation speeds are available, with the selection according to the plate material.

TECHNICAL FEATURES
- Standard Power Supply: 380V / 50Hz / 3 Phase
- Voltage: 380V / 50Hz / 3 Phase
- Bevelling Speed: 1.5 m/min (4.6 feet/min) to 3.0 m/min (9.3 feet/min)
- Electric Motor Power: 0.80 kW
- Minimum Plate Width: 70 mm (2.75 inches)
- Plate Thickness: 6 mm to 40 mm (1/4 inch to 1 1/2 inches)
- Standard Bevel Angle: 22°30' to 55°
- Machine Weight: 104 kg

- Carbon Steel:
  - 22°30': 18 mm
  - 30°: 17 mm
  - 37°30': 16 mm
  - 45°: 14 mm
  - 55°: 565

- Stainless Steel:
  - ~>: 13 mm
  - 15 mm
  - 12 mm
  - 12 mm
  - 10 mm

The GBC CHALLENGE 15 U is the upside-down version of the same GBC CHALLENGE 15. This version has been developed to perform bevels on the bottom side of the plate edge, particularly when a double bevel (X type) is required due to great wall thickness. Technical data are the same as the GBC CHALLENGE 15 upright model.

A key feature of the CHALLENGE 15 U is the variable head, which allows the bevel angle to be changed in a few minutes without any additional accessory.

Different types of milling cutters for tooth, basic material, and hardness are available, depending on the quantity of material of the steel plate to be beveled.

Standard Power Supply Volt/Hz/Phase 380* / 50 / 3
Voltage Volt 380* / 50 / 3
Bevelling Speed m/min 1.5 3.0
Bevelling Speed Surface feet/min 4.6 9.3
Electric Motor Power Kw 0.80
Minimum Plate Width mm 70
Minimum Plate Width inches 2.75
Plate Thickness mm 6-40
Plate Thickness inches 1/4"-1 1/2"
Standard Bevel Angle deg 22°30 to 55°
Standard Bevel Angle deg 22°30' to 55°
Machine Weight Kg 104

GBC plate beveling machine CHALLENGE 26 is suitable for heavy-duty work on thick plates. Once positioned on the plate edge, the machine travels along the plate automatically, without any intervention by the operator.

The highlight of the CHALLENGE 26 is the variable head, which allows the bevel angle to be changed in a few minutes without any additional accessory.

Close-up of the milling cutter working. Two rotation speeds are available, selection is according to plate material.

Voltage Volt: 380* / 50 / 3
Electric motor power Kw: 2.2 3.1
Min. plate width inches: 3.54
Plate thickness inches: 5/16" - 2"
Std bevel angle deg: 22°30' to 55°
Weight Kg: 340

The GBC CHALLENGE 26 U is the upside-down version of the same GBC CHALLENGE 26. This version has been developed to perform bevel on the bottom side of the plate edge when, due to great wall thickness, a double bevel (X type) is required. Technical data are the same as the GBC CHALLENGE 26 upright model.

The highlight of the CHALLENGE 26 U is the variable head, which allows the bevel angle to be changed in a few minutes without any additional accessory.

Different types of milling cutters for tooth, basic material, and hardness are available according to the quality of the material of the steel plate to be beveled.

Technical Features:
- Power Supply (Standard) Volt/Hz/Phase: 380* / 50 / 3
- Voltage: Volt 380* / 50 / 3
- Bevelling Speed: Surface m/min 1.1 2.2, feet/min 3.4 6.8
- Electric Motor Power: Kw 2.2 3.1
- Minimum Plate Width: mm 90, inches 3.54
- Plate Thickness: mm 8-50, inches 5/16" - 2"
- Standard Bevel Angle: degrees 22°30 to 55°
- Machine Weight: Kg 340