Heyligenstaedt flex turning center

Heyligensteadt heynuflex turning center

Hey igenstaedt Ultimate Performance in Metalcutting Tool Change and Supply System HEYNUFLEX

Rear view of machine with HEYNUFLEX HEYNUFLEX tool change and The tool management is open for rack-type magazine and PC-assisted tool supply system complete machining in a new dimension. tool pre-setting systems. tools from a rack-type magazine arranged at the rear contribute to extend the turning machine to an actual multi-technology center for the complete turning, drilling, and milling operations on complex workpieces. A tool changer with double gripper changes the respective tool. Thus a collision-free, continuous operation is possible. Breakage and wear monitoring facilities in conjunction with sister-tool strategies render machining of whole part families possible. HEYNUFLEX Rack-type magazine for more than 90 tools with auto tool cassette replenishment Feeding in or feeding out tools parallel to machining time.

Rack-type magazine 2 Tool robot 3 Radial/axial indexing head tool carrier HEYNUFLЕX New dimension in complete machining

HEYNUFLEX Technology comes to the workpiece HEYNUMAT for the joy of turning View of chain-type magazine arranged Also for complete machining of at the rear of the machine and tool- less complex workpieces, an change unit with double gripper. economical solution is available: A chain-type magazine with 36 tool stations. The arrangement behind the machine separate from the work area allows tool set-up parallel to machining time. Whether rack-type magazine with tool robot or chain-type design, in both instances a uniform interface and transfer of the tools with a double gripper to the change unit is ensured. 1 Chain-type magazine 2 Tool changer with double gripper 3 Radial/axial indexing head tool carrier HEYNUFLEX Chain-type magazine for 36 tools HEYNUFLEX- Indexing Head Hey igenstaedt Optimum solutions for individual applications External Internal turning turning Radial Axial milling milling drilling drilling Milling drilling in different Subject to modification angle positions Germany DLB An NC-controlled head attachment which is only interchanged if required о permits machining of bores or surfaces at nearly all angles. Heyligenstaedt GmbH Co. KG 5640 D-6300 Giessen