Imcar sih hydraulic 3 roll plate bending machine

Hydraulic three-roll plate bending machine Hydraulische universale Blechbiegemaschine mit Einlauf Angle rolling attachments The universal plate bending machine Why SIH? One Three powered rolls Standard electronic digital readouts to ease bottom rolls positioning and cone rolling. Speeded-up production, less setup mistakes, easy positioning of bottom rolls by electronic readouts. Automatic parallelism and tilt of the bottom rolls directly adjusted and monitored from the control desk. Four standard-fitted electronic readouts Interchangeable top roll for small and special-sectioned cylinders. Universal and versatile easy performance of cylindrical-conical and profile-section bending and of thin plates. Easy to use all operations controlled from the control desk. Totally reliable machine protected from accidental overload by hydraulic calibrated relief valves. Rich standard equipment cone rolling, extended journals, hydraulic drop-end, automatism for parallelism and tilt. General description The plate bending machine IMCAR SIH has the three rolls powered, the bottom rolls adjustable along two racking slideways, top roll fixed not adjustable. Because of this technical solution, the flat edge of the plate after roll forming can be reduced to its lowest 1-2 times size of thickness. The long stroke of the lower rolls allows the introduction of the plate in a way that gives the possibility of reducing the tangent angle between the resting points of the plate during the initial pinch operation. Maintenance remarkably reduced. The rotating machine parts are partly assembled on self-lubricating materials and partly lubricated by the centralized lubrication system. Standard features Power to the top roll through torque limiting device. Electronic readouts for each roll. Extended journals for angle rolling attachments. Cone rolling attachment. Hydraulic drop-end. Automatic tilt of bottom rolls. Separated movable control desk. Safe guards. Centralized lubrication. Optional features Angle rolling attachments. Interchangeable smaller top roll. Induction-hardened rolls. Lubrication pump with timer. N/C and CNC. Central and lateral supports for large bending radii. Hydraulic overturning squaring bar for plate alignment. Automatic cylinder ejector. Technical data Thickness Minimum  Bottom Bending Useful pinch Max. Pre-bend Length Width Height Top roll Rolls power Speed Speed Model Max length Power Technical specifications are subject to change without notice.