Ims 20-V ECCENTRIC PRESSES

Ims 20-V ECCENTRIC PRESSES

- MODEL TYPE: 20-V, 35-V, 45-V
- MAXIMUM PRESSURE NEAR BOTTOM DEAD CENTER: 20 TONN - 35 TONN - 45 TONN
- SPAN BETWEEN SUPPORTS: 220 mm - 220 mm - 260 mm
- DISTANCE BETWEEN CONNECTING ROD AXIS AND SUPPORT: 160 mm - 185 mm - 215 mm
- RAM SIZE: WIDTH X DEPTH: 250x133 mm - 270x173 mm - 300x200 mm
- TABLE SIZE: WIDTH X DEPTH: 900x310 mm - 600x360 mm - 680x420 mm
- MIN. DISTANCE BETWEEN TABLE AND RAM DOWN ADJUSTED UP: 275 mm - 275 mm - 275 mm
- RAM ADJUSTMENT: 50 mm - 65 mm - 75 mm
- ADJUSTABLE RAM STROKE: 0-60 mm - 0-76 mm - 0-80 mm
- RAM HOLE DIAMETER X LENGTH: 25"x56 mm - 40"x65 mm - 40H'x65 mm
- STROKES PER MINUTE APPROX.: c.a. 155 - c.a. 145 - c.a. 145
- DRIVE MOTOR RATING: 1.5 KW - 2.2 KW - 3 KW
- APPROXIMATE WEIGHT: c.a. 920 Kg - c.a. 1720 Kg - c.a. 2250 Kg
- OVERALL DIMENSIONS: 980x1000x1890 mm - 1

STANDARD EQUIPMENT
- Centralized lubrication system
- Air equipment with filter-lubricator, regulator, pressure gauge and air receiver
- Three-phase electric motor
- Electric equipment with braking angle control, push-buttons simultaneity, double solenoid valve, strokes counter, press-button and control board
- Automatic lubrication pump for models from 35 and 45 Tons

OPTIONAL ACCESSORIES
- Air cushion
- Subsidiary table
- Variable speed motor
- Two-polarity motor
- Feeder system
- Safety guards

FRAME
- Entirely made in welded steel panels to ensure robustness and minimal flexion even under maximum load.

ECCENTRIC SHAFT
- Constructed from forged, chromium-plated, and hardened steel for durability.
- Stroke regulation is achieved by an eccentric with frontal jaws, and the slide position is directly indicated.

ELECTRO-PNEUMATIC CONTROL CLUTCH - CYCLES
- The electro-pneumatic unit is controlled by a key selector, enabling manual push-button control of the "Brake-clutch" system.
- Allows the following cycles:
  - SINGLE: Manual work.
  - INTERMITTENT: Dies regulation.
  - CONTINUOUS: Automatic work.

BRAKE-CLUTCH FLYWHEEL-MOTOR UNIT
- Flywheel driven by a motor with V-belts, connected to the motor unit via a robust "clutch-brake."
- Designed to achieve low inertia and minimize heat generation.

IMS - Industria Masetto Schio S.r.l. - has recently acquired "Officine Meccaniche Dalle Molle S.r.l.," a company with over 40 years of experience in the power press market. Leveraging this extensive experience, IMS is now able to offer its loyal customers a comprehensive range of Eccentric Presses known for their quality, versatility, economy, and durability.

The design of IMS machines combines simplicity and robustness, ensuring precision, safety, and functionality even in challenging applications. With a wide range of models available, from 20 to 400 tons actual, including both fixed types (R = gear drive, V = flywheel drive) and inclined types (R1-V1 optional), IMS can meet the needs of even the most discerning customers.