Kiheung super mimax double column machiniing center

Kiheung super mimax machiniing center 1

Here's the detailed specification for the SUPER MiMAX:

Here's the control specification for the SUPER MiMAX:

- Controlled Axes: 3 (X, Y, Z)
- Positioning (G00)/Linear Interpolation (G01): 3 axes
- Circular Interpolation (G02, G03): 2 axes
- Least Command Increment: 0.001 mm
- Least Input Increment: 0.001 mm
- Machine Lock: All axes
- Emergency Stop/Overtravel: Available for all axes
- Stored Stroke Check: Available
- Backlash Compensation: Supported
- Stored Pitch Error Compensation: Supported
- Stroke Limit Check Before Travel: Supported
- Positioning (G00): Supported
- Linear Interpolation (G01): Supported
- Circular Interpolation (G02, G03): Supported
- Exact Stop Check (J G09G61): Supported
- Dwell (J G04): Supported
- Reference Point Return (G27, G28, G29): Supported
- 2nd Reference Point Return (G30): Supported
- Rapid Traverse Override (F0, 25, 50, 100%): Supported
- Override Cancel (M48/M49): Supported
- Jog Override: Available
- Feedrate Override: Available
- Manual Handle Feed (1 unit) (MPG): Supported
- Automatic Acc./Dec. (0.1 / 0.01 / 0.001 m): Supported
- Manual Handle Feedrate: Supported
- Skip Function (G31): Available
- Advanced Preview Control (G08): Supported
- Contour Control (A1 NANO): Supported
- Look-ahead Bell Type Acc./Dec. Before Interpolation: Supported
- Bell Type Acc./Dec. After Interpolation: Supported
- Helical Interpolation (G12.1, G13.1): Supported
- Manual Handle Interruption: Supported
- Coordinate Rotation (G68, G69): Supported
- Automatic Corner Override (G70, G62): Supported
- Polar Coordinate Command (G15, G16): Supported
- Linear Acc./Dec. Before Interpolation: Supported
- Threading/Synchronous Feed (G33): Supported
- Feedrate Clamp by Arc Radius: Supported
- Polar Coordinate Interpolation (G12.1, G13.1): Supported