Kingsland xs steelworker

Hydraulic steelworker The Kingsland X5 range of machines are in the Kingsland tradition of well-engineered, robust steelworkers, built for a long working life. These universal machines are equipped with standard tooling, including repetition support tables at punch, shear, and notch stations, to safely control the operations. Comprehensive safety guards are fitted as standard on all work stations. Free-standing on a suitable floor, they just require electrical connection to be ready for work.

For two-operator utilization, the hydraulic system is activated by two shielded foot controls, one operating the punch end cylinder, the other operating the shear end cylinder. The shear cylinder provides the power to the three shearing and the notch stations. The system gives accurate power inching at all five work stations and allows the machine to be stopped at any position, giving safe and accurate tool setting and work positioning.

The large punch bed area has a removable working front block and is designed to give a very wide range of punching applications. A punch-n-crochet table with rules and guides for repetition work is fitted as standard equipment.

Shearing This station provides large capacity angle cutting at 90 and 45 degrees. Angles between 45 and 90 degrees can be achieved by first cutting at 90 degrees and then flange trimming to the required angle in the shearing station. The shearing unit is fitted with a simple, robust hold-down which is adjustable for cutting round and square bars or to trim the flanges of angles.

Notching Station The notching station is fitted as standard with a rectangular notch table with adjustable backstops, allowing repetitive positioning. This versatile station can be fitted with a punching station option to give double-ended punching-throat depth 125 mm.

Twin Hole Unit Twin hole variable pitch unit. Punches 2 holes up to 29 mm diameter.

Section Cutting Station The machines are fitted as standard with multi-hole blades for cutting round and square bars. With optional equipment, the machines are able to cut channels, joists, Tee-beams, and many different profiles. The blades are firmly retained by simple clamps, allowing easy change without the need for elaborate setting.

Chamfering Application Specially designed patented blades and hold-down for chamfering applications. With this special equipment, it is possible to cut 45-degree chamfers at the edge of flat plates, thus eliminating the need for special machinery. For welding applications.

Touch Cut Ruled Length Stop The standard Touch Cut ruled length stop, one meter, can be used for the angle-cutting, section-cutting, and shear station. 2 or 3-meter lengths available.

further optional equipment M Controller optional M Controller standard Graphical simulation of the hole pattern. CNC-controlled positioning table Punching of plates, flat steel, in the web of channel and on the flange of channel and beams. The table is delivered with an easy to operate control and TDC screen. The CNC-control system ensures the required accuracy within a hole pattern with several gauge lines. Especially advantageous is the repeatability accuracy. The use of labor intensive manual layout is no longer required. Available for deep throat machines. large punch table with multi-purpose bolster removable low voltage movable halogen spotlight standard table block for overhang channel/joist flange punching equipment punch table, shear table and notch table standard mitre cut flanges of angle under shear blade equipment alternative rectangular/vee notching facility non-tiltable and as thus wear-free angle-cutting blades work station guards standard fitment power inching and adjustable strokes at punch shear end two cylinder operation centralized pressure lubrication overload relief on hydraulic system wide variety of applications for large hole punching, interchangeable bearings, seals, and valves readily tube notching, bending... available from stockists of hydraulic equipment large throat depth at the punching station extra deep machines with very low maintenance requirements throat models available standard equipment punch and die section blades punch adaptors section arm body blade with 1 cutting edge swing away punch stripper unit angle cutting arm body blades with 4 cutting edges easy change punch holder rectangular notch bolster blades with 4 cutting edges universal die bolster service toolkit heavy-duty support tables with guides at shear station work station guards and notch station low voltage halogen spotlight on magnetic base heavy-duty punch table with guides and backstop instruction, operating and maintenance manual curved shear arm blade with 2 optional: 4 cutting edges hydraulic oil fill shear body blade with 4 cutting edges one meter Touch Cut ruled length stop K11VGS-ND model specifications based on material strength of 450 N/mm I PUNCHING rated capacity maximum capacity diameter x thickness stroke length strokes/min.-20mm travel standard throat depth deep throat model largest hole optional maximum section working height SHEARING flat bar max. thickness flat bar max. width angle flange trim max 45 working height ANGLE CUTTING 90 cut 45 miter true int./ext. working height SECTION CUTTING round/square channel/beam Tee other profiles are also possible optional equipment illustrations, dimensions, weights... are not binding as designs are constantly being reviewed.

based on material strength of 450 N/mm NOTCHING material thickness width rectangle depth rectangle depth vee angle flange max. profile working height CORNER NOTCH maximum capacity TUBE NOTCH maximum outside diameter BENDING bar bend. max. capacity capacity x 3 PUNCHING AT NOTCH STATION throat depth maximum capacity TECHNICAL DATA motor power nett weight std. throat kg gross weight std. throat kg machine dim. LxWxH , cm packed dim. LxWxH , cm The Kingsland range of hydraulic steelworkers for impressive performances compact single cylinder 4 stations 5 stations double cylinder, single cylinder SHOWROOM standard throat hydraulic punching available in 55, 5 stations 2 stations ultimate double cylinder hydraulic steelworker machine available in 55, 65, available in ton double-punch available in ton available with deep throat available with deep throat KINGSLAND member of the available with deep throat HACO INTERNATIONAL GROUP available in ton available in ton Deep throat machines with very low maintenance requirements Large throat models available Standard equipment includes: Punch and die Section blades Punch adaptors Swing away punch stripper unit Easy change punch holder Universal die bolster Heavy-duty support tables with guides at shear station and notch station Low voltage halogen spotlight on magnetic base Heavy-duty punch table with guides and backstop Instruction, operating, and maintenance manual Curved shear arm blade with 2 optional: 4 cutting edges Shear body blade with 4 cutting edges One meter Touch Cut ruled length stop The Kingsland range of hydraulic steelworkers offers impressive performance. These machines are suitable for a wide variety of applications, from large hole punching to tube notching and bending. With their durable design and advanced features, Kingsland hydraulic steelworkers deliver reliable and efficient results. Whether you need to punch, shear, notch, or perform angle cutting, the Kingsland range has you covered. These machines are backed by the expertise of the Kingsland Engineering Co. Ltd ensuring quality and innovation in every aspect. Choose Kingsland for your hydraulic steelworking needs and experience exceptional performance.

The original leaflets are for sale. A preview is shown. The price of the leaflet is on request.
Kingsland xs steelworker
Download document
Machine not in stock?
We inform you with new machines via our Alert Services
Do you want to sell your machine?
Direct cash for your machine(s)
Back to overview