Kohler kohler strip guidances

Kohler  Strip Guidances strip controls Strip guidance Strip Guidance For material widths from mm the use of a strip transfer table will be convenient. It allows to convey the initial strip from the leveling machine into the feeding mechanism of the press or into the subsequent machine automatically and smoothly. Strip Loop Pit Non-contacting Strip Loop Control Dancer Arm 5peed Control Used only for low strip speeds, inferior number of strokes and insensitive strip surfaces. Strip guidance also with switching on/off safety interlock triggered when loop gets too long or too short. Leading-in Devices For material thicknesses from mm and widths from mm use of a pressure roller, holding-down roller and leading-in wedge is recommended. For coil weights superior to kg a coil loading car will be required. Functional Description Place the coil on the coil loading car using a crane or fork truck. Move the coil loading car to the same height as the coil axis. The coil is transferred from the coil loading car to the coiler by means of the transversing device. The coil is secured by means of the hydraulic mandrel expansion. The coil loading car is lowered. The coiler is adjusted centrally with the strip. The hydraulic coil back stops are swivelled in. The pressure roller is lowered to the strip, and the coil is untied. The strip is moved from the coiler to the leveling machine by means of a motorized pressure roller and the leading-in wedge moved into position. The coil curvature is eliminated through the pressure of the holding-down roller so that the strip may pass smoothly into the leveling machine.