Kohler kohler strip levelling

Kohler  Strip Levelling Machine Strip Levelling machines can be fitted with 9 rollers for general material flatness, or with 19 or 21 rollers for precision strip levelling.

Precision strip levelling machines are used to ensure the highest flatness when processing materials.

9-roller levelling machines are essential to eliminate coil curvature and ensure seamless passage of the strip through tools.

Levelling Unit A combination of coiler, leveller, and strip guide with integrated control unit is termed as the levelling unit.

The strip from the coiler is fed into the levelling machine via a 2-roller strip take-off.

The coilers are laterally adjustable to facilitate centralized feeding of the strip to the levelling machine.

The strip is guided to the subsequent processing machine through a strip guiding system.

Camber Leveller Camber levellers are necessary for strips exhibiting both coil curvature and camber.

A precision levelling machine with a camber leveller is used for this purpose.

The entire setup includes a base frame, a levelling machine, and a camber leveller attached to the inlet and outlet sides.

The system facilitates the levelling of strips where the width-to-thickness ratio does not exceed.

Camber Leveller and Rewinding Unit The recoiled strips from this setup do not need further levelling during subsequent processing.

The system includes a camber leveller, rewinding coiler, and strip guide with integrated control.

This setup facilitates measuring and correcting camber.

Enhancement Options Options for individual enhancements include a measuring table for checking levelling results and a measuring station for automatic camber measurement and correction.

Technical Data Various levelling machine types are available with 9 or 21 levelling rollers. Custom machines are also available upon request.

Please note that the provided technical data is applicable to materials with a yield limit of 400 N/mm and an extension greater than 25%. The maximum values for strip width or thickness will vary according to the exact values in the levelling diagram