This machine is reserved
Lathe ZERBST - DP1 S3 x 3700
MACH-ID 8886| Make: | ZERBST |
| Type: | DP1 S3 x 3700 |
| Year: | 1992 |
- 4 chuck 1600 mm
- Heidenhain digital read out
- Steady rest 710 mm
- Powered tailstock
- Threath cutting
- Triple guide ways cast irion bed design
- For turbine rotors, electrical motor anchors , reactor vessels, cylinders, rope pullys, marine propulsion shaft, castings, shafts and cement industry
Specifications
DBC Turning Length
3700 mm
145.669 inch
Swing over bed Ø
2000 mm
78.74 inch
Swing over cross slide Ø
1600 mm
62.992 inch
Spindle bore
100 mm
3.937 inch
Spindle power
55 kW
55 kW
Bed width
1590 mm
62.598 inch
Tailstock spindle Ø
220 Ø
220 Ø
Stroke pinole
210 mm
8.268 inch
Power
55 kW
55 kW
Speeds / ranges
3,55 - 450 Rpm
3,55 - 450 Rpm
Feed rate X-Axis
5000 mm/min.
5000 mm/min.
Feed rate Z-Axis
5000 mm/min.
5000 mm/min.
Workpiece load
12500
12500
Dimensions (Estimate)
Length
8500 mm
334.645 inch
Width
3400 mm
133.858 inch
Height
2060 mm
81.102 inch
Weight
27400 kg
60434 lbs
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
