Lovent SRL Line fot cutting and bending

Lovent SRL Line fot cutting and bending 1

The line for cutting and bending, composed of completely hydraulic modules for building ducts, offers a flexible and user-friendly solution. Here's an example configuration:

Standard Configuration:
1. Uncoiler: Adjustable brake with wheels and tracks for loading/unloading.
2. Sheet feeder: Adjustable slide for each sheet, suitable for lengths from 1500 to 1250 mm. Idle wheel and automatic blocking system for unused sheets.
3. Flattening unit: Consists of 5 shafts in chrome steel (diameter 90 mm) and a couple of tow rolls in vulkolan (diameter 120 mm). Includes gear transmission, linear shifting measurer with wheels, and encoder.
4. Ribbing unit: For the realization of longitudinal stiffening ribs with a pitch of 160 mm, maximum height 6 mm, hydraulic movement, and stiffened steel rolls (diameter 120 mm).
5. Hydraulic guillotine shears and bending machine: Useful length of mm 1550, maximum thickness 1.5 mm (for plate from 40 Kg/mm2).
6. Control cabinet: Equipped with an industrial PC, pieces, and quantity positioner, management software.
7. Daily production: For ducts of medium dimensions, ranging from 7 to 10 tons in 8 hours.

Additional Modules:
1. Mechanical shears: Consists of 4 opposed units (2 triangular and 2 rectangular) for the realization of grooves for the connection of ducts by means of flanging.
2. Notching machine: For side 90° only for SnapLock mold.
3. Flanging machine: Model 23 "SNAP-LOCK".

With this modular setup, clients can choose the right modules according to their specific needs, and all calculations are computerized, ensuring efficient and accurate operations. The line supports a range of galvanized plate thicknesses from 0.6 mm to 1.5 mm, depending on the model.