Home
ARMSTRONG-BLUM marvel band saw

ARMSTRONG-BLUM marvel band saw

Name: Mach 4 Metal
Rating: 4.9

ARMSTRONG-BLUM marvel band saw
For High Production Cuttíng of High Chrome Alioys, Staínless, Exotics
These blades otfer all the advantages of the Eag1e Beak tooth design in Mix-Tooth
patterns plus the added advantage of higher tooth hardness of 67-69 Rockwell C.
When you want a b1ade that wi11 stand up to high production sawing of the super
alloys, this is the b1ade to choose. Higher Cobalt content of the blade s cutting edge
gives it excellent resistance to the higher temperatures and abrasion developed in
sawing tńe super alloys. Availabie in welded lengths to fit any band saw machire and
in 100 and 250 ft. coils in widths and patterns.
1. 40 1onge electron beam
weld líne i τм positves

RAKE ВLАDЅ
Posítive Rake
Recommended for General Purpose sawing
The Marvel Matrix Mix-Tooth

PORT A BLADЕЅ
M-2 WELDED EDGE
M-2 Welded Edge material offers moгe toughness and edge holding properties in those rough
structural and thin wall pipe and tube cuttíng applications and more easily withstands the rough use
often íncurred in portable band saw use. These blades are heat-treated to optímum hardness, giving
them just the ríght toughness and wear resistance to give superior performance.
HARD EDGE-HARD BACK
This s a premium quality carbon steel b1ade which receíves double heat treatment to give it atoughness and strength for long service 1ife.
Merve1 Port A blades are packaged in a cortvenient

HARD EDGE-FLD 1BLE BACK
1 70 band box, designed foг eaѕy individual
blade removal

These blades are primarily recommended for sawíng non-ferrous materials.

RECIPROCATING BLADES

RECIPROCATING BLADeS/SABRE SAW BLADE EASYON ET BLADES BOSCH J1G SAW BLADES
Shatterproof welded edge blades. Shatterproof welded edge blades Shatterproof welded edge. Shatterproof welded edge
Fit Skil, Milwaukee, Millers Falls, for cutting steel, wood, Masonite. shaped tang fits Rockwell or blades available with single or
Rockwell, Ridgid, Hitachi, AEG, 1/4 tang. Fits most saws. Poгteг-CaЬ1e bayonet saws. double tangs.
Makita, B1ack Decker and Ma1co Packed 5 of a size in vinyl pouch. Packed 5 of a size in vinyl pouch.
saws 1/2 tang.
Packed 5 of a size in vinyl pouch.
POWER HACKSAW BLADES
M-3 H1GH SPEED-EDGE BLADES
The Marvel M-3 High Speed-Edge Hack Saw Blade was invented and perfected by
Marvel because no other type of blade was capable of standing up to the higher
feed pressures and faster blade speeds available in Marvel Hack Sawing machines.
Today the Marvel Hack Saw Blade is still the only blade capable of getting maximum
cutting off speed, accuracy and economy from Marvel machines. Contínuous testing
and user experience has proven, that one type of blade the Marvel M-3 High-
Speed-Edge Blade is truly a premium blade but, at no extra cost.
The blade s M-3 Hígh speed steel teeth are heat treated to obtain maximum
toughness and wear resístance and are designed for effícíent chip removal. The pín
holes in Marvel blades are placed below the center line of the blade as close to the
cutting edge as possible so that when the blade is tensioned tautly a straíght cutting
edge is presented to the work.
NOW AVAILABLE NEW MIX-TOOTH POSITIVE RAKE BLADES, designed for
high productíon cutting of those tough cutting high speed, Staínless and hígh
temperature alloys. Marvel s M-3 High Speed-Edge combined wíth a 7 positive rake
on the face of each tooth give this blade better penetration, providíng faster, easíer
cutting at reduced feed rates, resulting in longer blade lífe and lower costs per cut.
The new Mix-tooth Positive Rake blades are presently available in the popular
18 x 13/4 x 3/4PR tooth and 24 x 2 x 3/4PR tooth sìzes.
ıııarrel HAND HACKSAW BLADE
HAND HACK SAW FOME AND BLADES
The Marvel Hand Hack Saw Frame ís designed for easíęr, moгe effícíent sawing. The
heavy duty frame permíts maximum b1ade tension and ís adjustable to accept 10 or
12 hand hack saw blades. The smooth cast aluminum handle provides a secure and
comfortable hand grip. It ís molded to a tubular steel adjustment sleeve ínto which
the solíd front rod end assembly slides. Blade teeth can be pointed down, up or to
either side.

Marvel has reserved the Exemplar name for its welded-edge hand hack saw blades.
The name Exemplar has been synonymous with the best, most cost-effectíve hand
hack saws on the market. Now, Manıel offers a super welded-edge Exemplar blade
that provides even greater efficiency and economy in sawing every type of inetal. The
new blades have a hardened high speed cutting edge electron welded to a tough
fatigue-resistant alloy back to make them shatterproof under normal metal sawing
conditions. These new blades out-perform the standard hígh speed steel blades
because of a superior atmosphere-controlled heat treatment and the abilíty of the
tough, fatigue-resístant alloy back to be tensioned tauter to allow straighter cuts while
beíng completely shatterproof. Avaílable in 10 and 12 lengths.
CARBON 60 BLADES
Recommended for the easier-to-saw materials. Precísíon milled teeth are specially
hardened to 63-64 to províde a multi-purpose economy blade that wíll give good
service in many sawíng applicatíons. Available in 10 and 12 lengths and varíous

pítches.
The M-42 Cobalt Band B1ade s super-hard cutting edge is welded to a special
analysis a11oy steel back to produce a cutting too1 that will give you unequaled perfor-
mance in cutting solids in the higher alloys. Note: because of its super-hard cutting
edge. this blade is recommended only for cutting solids . High Cobalt content of the
blade s cutting edge gives it excellent resistance to the high temperatures and abra-
sion developed in sawing the super alloys. This is the blade we recommended for
maximum blade life when you re doing high production sawing of solids in the tough
alloys other blades cannot handle.
Available welded to length and in coil stock lengths of 100 and 250 feet. 1 Vτ width
only in 100 feet and random length coils.
This is the Manıel Blade many long-time Carbon Blade users have switched to in
- order to upgrade the cutting capability of their machines. They get faster cutting and
much longer blade life up to 10 times longer than Carbon Blades with a significant
reduction in cutting costs.
The cutting edge of this b1ade has high Tungsten Chromium Vanadium
Molybdenum content which is heat treated to yield the desirable tooth-tip hardness of
64-66 along with temperature resistance to 1000 F. This allows you to run our
M-2 Welded-Blade at the higher speeds and heavier feed forces you need in general
purpose, high production cutting. A favorite blade in maпy sawing departments for its
excellent performance and long tool life. These blades are otfered in Raker, Wavy
and Hook tooth styles in widths from inch up to and includìng 1 V2 Coi1 stock,
which can be welded endless on a standard carbon steel welder is also available in
lengths of 100 and 250 feet. 1 V2 wide stocks available only in 100 feet and random
length coils.
Many users who do occasional cutting of mild and low alloy steels and nonferrous
materials have preferred Marvel Carbon Blades over other brands because they have
found they get better value in this economy-priced blade from Marvel. Though our
Carbon Band Saw Blades are considerably lower in price, they are made with the
same care and attention to detail as our premium quality Welded-Edge Blades. The
ditference in price lies in the more costly materials and production processes re-
quired to produce them. However, it must be remembered that even Manıel Carbon
Blades cannot deliver the same high cutting rate and long tool life as a Welded-Edge
B1ade 1f a Carbon B1ade meets your requirements, you can buy no better than a Marvel.
These blades combine the advantages of Mix-Tooth configuration with high carbon
steei metaiiurgy to provide exceiient performance and extended biade iife in a wide
variety of sawing applications. Welded to length or in coils 100 and 250 feet long.
We continue to produce the Flexible Back Carbon Blade because of the many con-
tour and friction saw machine users who have shown their preference for Marvel
blades. Careful heat treatment and tempering brings each blade to the precise
degree of hardness and beam strength required in contour or friction sawing. Carbon
blades for woodworking applicatíon are also avaílable. 1/4 , 3/a and У2 blades for
woodworkíng are .032 thick.
MARVEL band saw or hack saw blade users qualify for free inspection and
maintenance service on their MARVEL sawing machines. A11 service is performed
by factory-trained experts.
Seríes 25 H1gh speed, Seríes 81 and 81A PC Sıngıe Cut 81 Seríes 8 Mark 11.
heavý duty Pıodúction Cut-and Pıógıamma6ıé Coп гσ1 Aulomatic Bar Uníveısal Band Saw O1/ Śaw- Capacity 25x28 Feed Band Saws 814 PĆ Capacіly 1B x20 Ćapacίіy 18 к22 .
Seríes V-10A2 8 V-10A2PC SERIES 15 and 15A PC Series 13A4 and 13A4
Univeısal Automat c Ba Síngle Çut 15 and Program PC Automatic Bar Feed
Feed Band Saw, Capacity mah1e Ćontıol Aufomahc 8aг Band Saw Сарасііу
Feed Band Saws 15A PC7 74x14
availeble with t і oг 1 Y
Blade Capacty 1B x20

MARVEL BAND SAW BLADE
Matríx Modified Mix-Tooth. lnterrupted-tooth cutting edge M-42 Cobalt Welded-Edge. High Cobalt content for tough,
makes this the best a11-purpose b1ade for sawing materials of wear and abrasion-resistant teeth. Super hard cutting edge
, varying cross-section pipe, structurals, tubing. Cobalt coп- 67-69 produces unequalled performance in cutting
teıt allows running at higher speeds arid feeds for faster cut- solids in the higher alloys. 3/a , 1, 1 U4 1 Vz , and 2, widths.
ting of solids. Vi 3/4 , 1 11/4, 11/2 and 2 widths in all
M-2 High-speed Edge. Widely used b1ade for general pur- popular tooth patterns.
.. pose sawíng. A favorite in many plants for its excellent per-
Eagle Beak Míx-Tooth Posítíve Rake. New 71/20 Positive . . formance and long tool 1ife. Raker, Wavy and Hook tooth
Rake Mix-Tooth cutting edge has 40 greater strength at styles in widths from 1/4 up to and includíng 1

For High Production Cuttíng of High Chrome Alioys, Staínless, Exotics
These blades otfer all the advantages of the Eag1e Beak tooth design in Mix-Tooth
patterns plus the added advantage of higher tooth hardness of 67-69 Rockwell C.
When you want a b1ade that wi11 stand up to high production sawing of the super
alloys, this is the b1ade to choose. Higher Cobalt content of the blade s cutting edge
gives it excellent resistance to the higher temperatures and abrasion developed in
sawing tńe super alloys. Availabie in welded lengths to fit any band saw machire and
in 100 and 250 ft. coils in widths and patterns.
1. 40 1onge electron beam
weld líne i τм positves

RAKE ВLАDЅ
Posítive Rake
Recommended for General Purpose sawing
The Marvel Matrix Mix-Tooth

EAGLE BEAK blade incorporates a unique patented
ıııar el positive rake tooth design with the Mix-Tooth pitch to provide a band b1ade that
EAGLE BEAK delivers truly outstanding performance as measured in cutting-off accuracy, long
blade life and quiet cutting. The Eagle Beak tooth shape provides a 40 longer
electron beam weld and a higher, stronger back which adds more strength to the
- tooth enabling it to withstand the greater feed forces generated by the more
aggressive 71/20 Positive Rake cutting angle. The EAGLE BEAK tooth design
absorbs and distributes the cutting force over the entire tooth rather than have it
concentrated at the sharp tooth tip. This b1ade has a tooth hardness of 65-67
Rockwell C for superior general purpose cutting of a11 structurals, channels, tubing
and other interrupted cuts as we11 as solid bars. Available in welded lengths to fit
any band saw machine and in 100 and 250 coils in widths and patterns.
СОВАІТ ВLАDЕЅ
Recommended For Cutting Solìds in The Hígher Alloys
These blades combine high tooth hardness 67-69 of the M-42 Cobalt
metallurgy with the interrupted mix-tooth configuration to provide a blade that delivers
exceptional performance in cutting solids in the higher alloys. When using this blade,
you can apply higher blade speeds and heavier feed forces to obtain faster cutting.
These blades are available in 1, 11/4, 11/2, and 2 widths in welded lengths to fit
any band saw machine and in 100 and 250 foot coils. 1 Vг and 2 widths are
available oп1y in 100 feet and random length coils.
МіХТООТН WЕLDЕDЕDОЕ ВL3Е
This composíte welded-edge blade wíth an ínterrupted-tooth cutting edge Mix-Tooth
will produce excellent performance in cutting pipe, tubing and structurals any
materials with varying cross-section. The blade will also withstand higher cutting
speeds and heavier feed pressures when cutting solids. Tooth hardness of 65-67
provides improved wear resistance and longer tool lìfe when cutting solids.
The mixed-tooth configuration interrupts harmonic vibrations to reduce noise and
assure smoother cuts. in addition, the varying gullet depths of the mixed-tooth pattern
improve chip clearance for more efficient sawing. The tough, special analysis alloy
back to which the cutting edge is electron-beam welded permits higher blade tension-
ing safety.
Matrix Modified Mix-Tooth Blades are available welded to length to fit any band saw
machine and the stock is available in coils of 100 and 250 feet. 1 V2 width available
only in 100 foot and random coil lengths.
HOLE SAWS
HEAVY DUTY HIGH SPEED EDGE HOLE SAWS
Marvel High-Speed-Edge Ho1e Saws wíll cut holes in every type of machinable materíals from
stainless steel, cast iron, steel, brass, copper and alumínum to wood and plastics. They range ín
size from 9/,в to 6 diameter and wíll cut to a depth of 11/a . Marvel Hole Saws caп be used in portable electric or air drills, portable magnetic drílls, dri11 presses, lathes, radial drills and boring
mills. As an example of their performance, a 41/2 hole can be cut through a 1/4 steel plate in just
oпe 1 minute.
HOLE SAW ARBORS AND ADAPTERS N0 1 AιЬo
w No. 0 Arbor 1/4 round shank. Recommended only for use in líght duty portable hand drílls. Used
Nc О-, AгDστ Adapter on hole saw from 9/,srt to 13/,в diameter. 1N. О A,So.
No. 0-1 Arbor Adapter permits use of 0 and 1 Arbors in larger hole saws.
No 3
Ouick Changv No. 1 Arbor-7/,в hexagon shank. Recommended for portable drills and light duty drí11 presses AоOoι
when sawing holes 91/,Ø to 13/,в diameter. Can be used with 212 and 312 Morse Taper Adapters.
1 50 2
Ouick-Change 1 No. 2 Quick-Change AгЬoг-7/,в hexagon shank with time savíng snap-action co11ar. Changíng Artю
hole saws can be done in seconds. Snap-action co11ar raises drive pins out of saw cap and hole
иo 33А AГ6o, saw is simply unscrewed. Recommended for V2 or larger portable drills and líght duty presses, for
É 50 : ] eAró ` hole saw 11/4 to 6 diameter. Can be used with 212 and 312 Morse Tapeг Adapters.
ARBORs No. 3 Arbor-5/в hexagon shank with time saving snap-action co11ar. Changing hole saws can be
o. Sfze Shank iiiches Fíts Ho1e Saw lnehes done in seconds. Snap-action co11aг raises drive pins out of saw cap and hole saw is símply
Ó Y. Round 0Aь to id/rh unscrewed. Use with hole saws 11/4 to 6 diameter. Can be used with 330 MorseTaperAdapters.
1 гeь Hen /rx to ld/ri
z гьь нeо 1 ø rσ 6 No. 336 Arbor No. 3 MorseTaper Shank and a heavy backing plate with wider spaced drive pins
a WsHen tt/itoG for rigid support when sawing extremely heavy production work in radial drills, boring mi11s or lathes. 336 No, 3 Mórse Ta eг 3 to 6 The Arbor incorporates a 3/e guide pin which enters a 3/e pilot hole which must first be dri11ed in the
No. 7 Eztension 12 1ong 1ot No. 1 ov No. 2
Arbors. material. Use only with 3 to 6 diameter hole saws.
No. 7 Arbor Extensíon is 12 long and fìts Nos. 1 and 2 Arbors for reaching otherwise inaccessíble places.
No 212 Nos 312 Mo ie a d 330 Tapet мoιse Morse Taper Adapters
Aaap eг тaPвг
A,6oι No. 212 Morse Tapeг Adapter has a 2 Morse Tapeг Shank and fíts hexagon shank of No. 1 and 2 Arbors. Adaptets
No. 312 Morse Tapeг Adapter has a 3 Morse Taper Shank and fits hexagon shank of No. 1 and 2 Arbors.
No. Shank Mo,ae Ta eг No. F1á AіЬo,іі No.
212 2 ı aпd 2 No. 330 Morse Tapeг Adapter has a 3 Morse Taper Shank and fits hexagon shank of No. 3 AгЬoг.
312 з ıaю2
330 3 3 Morse Taper Arbor Adapters Sleeves for converting Hex Shank Arbors to Morse Taper Shank
ıııarrel PO RT-A- B LAD ЕЅ
M-2 WELDED EDGE
M-2 Welded Edge material offers moгe toughness and edge holding properties in those rough
structural and thin wa11 pipe and tube cuttíng applications and more easily withstands the rough use
often íncurred in portable band saw use. These blades are heat-treated to optímum hardness, giving
them just the ríght toughness and wear resistance to give superior performance.
HARD EDGE-HARD BACK
This s a premium quality carbon steel b1ade which receíves double heat treatment to give it a
toughness and strength for long service 1ife.
Merve1 Po,n-A-Hlades are packaged in a cortvenient HARD EDGE-FLD 1BLE BACK
1 70 band 6ox, designed Γoг eaѕy ii,dividoal
61ede ıemoval_ These blades are primarily recommended for sawíng non-ferrous materials.
iiiarjgl RECIPROCATING BLADES
.. .. 1 в в.
RECIPROCATING BLADJ1EGS/SABRE SAW BLADBEASYONET BLADES BOSCH J1G SAW BLADES
Shatterproof welded edge blades. Shatterproof welded edge blades Shatterproof welded edge. Ĺ Shatterproof welded edge
Fit Ski1, Milwaukee, Millers Fa11s, for cutting steel, wood, Masonite. shaped tang fits Rockwell or blades available with single or
Rockwell, Ridgid, Hitachi, AEG, 1/4 tang. Fits most saws. Poгteг-CaЬ1e bayonet saws. double tangs.
Makita, B1ack Decker and Ma1co Packed 5 of a size in vinyl pouch. Packed 5 of a size in vinyl pouch.
saws 1/2 tang.
Packed 5 of a size in vinyl pouch.
ıııarreГPOWER HACKSAW BLADES
M-3 H1GH SPEED-EDGE BLADES
The Marve1 M-3 High Speed-Edge Hack Saw B1ade was invented and perfected by
Marve1 because no other type of b1ade was capable of standing up to the higher
feed pressures and faster b1ade speeds available in Marvel Hack Sawing machines.
Today the Marvel Hack Saw B1ade is sti11 the on1y blade capable of getting maximum
cutting off speed, accuracy and economy from Marvel machines. Contínuous testing
and user experience has proven, that one type of b1ade the Marvel M-3 High-
Speed-Edge B1ade is tru1y a premium b1ade but, at no extra cost.
The b1ade s M-3 Hígh speed steel teeth are heat treated to obtain maximum
toughness and wear resístance and are designed for effícíent chip removal. The pín
holes in Marvel blades are placed below the center line of the b1ade as close to the
cutting edge as possible so that when the blade is tensioned taut1y a straíght cutting
edge is presented to the work.
NOW AVAILABLE NEW M1X-TOOTH POSITIVE RAKE BLADES, designed for
high productíon cutting of those tough cutting high speed, Staínless and hígh
temperature alloys. Marvel s M-3 High Speed-Edge combined wíth a 7 positive rake
on the face of each tooth give this b1ade better penetration, providíng faster, easíer
cutting at reduced feed rates, resulting in longer b1ade lífe and lower costs per cut.
The new Mix-tooth Positive Rake blades are presently available in the popular
18 x 13/4 x 3/4PR tooth and 24 x 2 x 3/4PR tooth sìzes.
ıııarrel HAND HACKSAW BLADE
HAND HACK SAW FØME AND BLADES
The Marvel Hand Hack Saw Frame ís designed for easíęr, moгe effícíent sawing. The
heavy duty frame permíts maximum b1ade tension and ís adjustable to accept 10 oГ
12 hand hack saw blades. The smooth cast aluminum handle provides a secure and
comfortable hand grip. 1t ís molded to a tubular steel adjustment s1eeve ínto which
the solíd front rod end assembly slides. B1ade teeth can be pointed down, up or to
either side.
ХЕРLА РLЈЅ Ѕ
Marvel has reserved the Exemplar name for its welded-edge hand hack saw blades.
The name Exemplar has been synonymous with the best, most cost-effectíve hand
hack saws on the market. Now, Manıel offers a super welded-edge Exemplar b1ade
that provides even greater efficiency and economy in sawing every type of inetal. The
new blades have a hardened high speed cutting edge electron welded to a tough
fatigue-resistant a11oy back to make them shatterproof under normal metal sawing
conditions. These new blades out-perform the standard hígh speed steel blades
because of a superior atmosphere-controlled heat treatment and the abilíty of the
tough, fatigue-resístant a11oy back to be tensioned tauter to a11ow straighter cuts while
beíng completely shatterproof. Avaílable in 10 and 12 lengths.
CARBON 60 BίADES
Recommended for the easier-to-saw materials. Precísíon milled teeth are specially
hardened to 63-64 to províde a multi-purpose economy b1ade that wí11 give good
service in many sawíng applicatíons. Available in 10 and 12 lengths and varíous

pítches.
.E . . .Х .І
The M-42 Cobalt Band B1ade s super-hard cutting edge is welded to a special
analysis a11oy steel back to produce a cutting too1 that wi11 give you unequaled perfor-
mance in cutting solids in the higher alloys. Note: because of its super-hard cutting
edge. this blade is recommended only for cutting solids . High Cobalt content of the
blade s cutting edge gives it excellent resistance to the high temperatures and abra-
sion developed in sawing the super alloys. This is the b1ade we recommended for
maximum blade life when you re doing high production sawing of solids in the tough
alloys other blades cannot handle.
Available welded to length and in coil stock lengths of 100 and 250 feet. 1 Vτ width
only in 100 feet and random length coils.
- 2 N1GH ЅFУ.
This is the Manıel B1ade many long-time Carbon B1ade users have switched to in
- order to upgrade the cutting capability of their machines. They get faster cutting and
much longer blade life up to 10 times longer than Carbon Blades with a significant
reduction in cutting costs.
The cutting edge of this b1ade has high Tungsten Chromium Vanadium
Molybdenum content which is heat treated to yield the desirable tooth-tip hardness of
64-66 along with temperature resistance to 1000 F. This allows you to run our
M-2 Welded-B1ade at the higher speeds and heavier feed forces you need in general
purpose, high production cutting. A favorite b1ade in maпy sawing departments for its
excellent performance and long too1 1ife. These blades are otfered in Raker, Wavy
and Hook tooth styles in widths from inch up to and includìng 1 V2 Coi1 stock,
which can be welded endless on a standard carbon steel welder is also available in
lengths of 100 and 250 feet. 1 V2 wide stocks available only in 100 feet and random
length coils.
Many users who do occasional cutting of mild and 1ow a11oy steels and nonferrous
materials have preferred Marvel Carbon Blades over other brands because they have
found they get better value in this economy-priced b1ade from Marvel. Though our
Carbon Band Saw Blades are considerably lower in price, they are made with the
same care and attention to detail as our premium quality Welded-Edge Blades. The
ditference in price lies in the more costly materials and production processes re-
quired to produce them. However, it must be remembered that even Manıel Carbon
Blades cannot deliver the same high cutting rate and long tool life as a Welded-Edge
B1ade 1f a Carbon B1ade meets your requirements, you can buy no better than a Marvel.
DQtıR МIΛ`
вв These blades combine the advantages of Mix-Tooth configuration with high carbon
steei metaiiurgy to provide exceiient performance and extended biade iife in a wide
variety of sawing applications. Welded to length or in coils 100 and 250 feet 1ong.
We continue to produce the Flexible Back Carbon B1ade because of the many con-
tour and friction saw machine users who have shown their preference for Marvel
blades. Careful heat treatment and tempering brings each b1ade to the precise
degree of hardness and beam strength required in contour or friction sawing. Carbon
blades for woodworking applicatíon are also avaílable. 1/4 , 3/a and У2 blades for
woodworkíng are .032 thick.
1
\
\
MARVEL band saw or hack saw blade users qualify for free inspection and
maintenance service on their MARVEL sawing machines. A11 service is performed

by factory-trained experts.

E
Seríes 25 H1gh speed, Seríes 81 and 81A PC Sıngıe Cut 81 Seríes 8 Mark 11.
heavý duty Pıodúction Cut-and Pıógıamma6ıé Coп гσ1 Aulomatic Bar Uníveısal Band Saw
Ò1/ Śaw- Capacity 25x28 Feed Band Saws 814 PĆ Capacіly 1B x20 Ćapacίіy 18 к22 .

Seríes V-10A2 8 V-10A2PC SERIES 15 and 15A PC Series 13A4 and 13A4
Univeısal Automat c Ba Síngle Çut 15 and Program PC Automatic Baı Feed
Feed Band Saw, Capacity mah1e Ćontıol Aufomahc 8aг Band Saw Сарасііу
ıіГкІд Feed Band Saws 15A PC7 74x14
Avaı1a61e with t і oг 1 Y
61ade Capacty 1B x20
,
MARVEL BAND SAW BLADE
Matríx Modified Mix-Tooth. lnterrupted-tooth cutting edge M-42 Cobalt Welded-Edge. High Cobalt content for tough,
makes this the best a11-purpose b1ade for sawing materials of wear and abrasion-resistant teeth. Super hard cutting edge
, varying cross-section pipe, structurals, tubing. Cobalt coп- 67-69 produces unequalled performance in cutting
teıt allows running at higher speeds arid feeds for faster cut- solids in the higher alloys. 3/a , 1, 1 U4 1 Vz , and 2, widths.
ting of solids. Vi 3/4 , 1 11/4, 11/2 and 2 widths in a11
M-2 High-speed Edge. Widely used b1ade for general pur- popular tooth patterns.
.. pose sawíng. A favorite in many plants for its exoellent per-
Eag1e Beak Míx-Tooth Posítíve Rake. New 71/20 Positive . . formance and long tool 1ife. Raker, Wavy and Hook tooth
Rake Mix-Tooth cutting edge has 40 greater strength at styles in widths from 1/4 up to and includíng 1 Vτ .
- weld line to absorb cuttíng stresses created by more ag-
gressive cutting action. Stronger, tougher Ь1ade plus 8 Hard Back Carbon Míx-Tooth. ComЬіne the advantages of
Cobalt Matrix tooth tip assures longer, more accura[e cutting. Mix-Tooth configuration with high caгЬon steel metallurgy to
3/4 , 1 11/4. 11/2 , and 2, wídths. províde excellent performance and extended b1ade lífe in a
wide variety of sawing applications. Vz , 3/4 and 1 widths.
, Eag1e Beak P1us Cobalt Mix-Tooth Positive Rake. Positive :ІІ. rake teeth, higher Cobalt content, 67-69 Rockwell C. plus Hard Back Carbon. Hardened back provides greater beam
ігііит , Mix-Tooth pítch make this b1ade ideal for high production strength for more accurate sawing. Raker, Hook, Skip and
sawing of high chrome alloys, stainless, exotics, 3/a , 1 11/4 Wavy tooth styles in widths from / ь up to and including 1.
. 1Vτ , 2, and 25/e widths. , Flexíble Back Carbon. Recommended for Contour and fríc-
M-42 Cobalt Mix-Tooth. Recommended for cutting solids in tion sawíng at speeds over 3000 sFPM. Avai1ab1e in Raker,
the higher alloys. Delivers exceptiona1 performance under Hook, skip and Wavy tooth styles in wídths from / ь up to
high blade speeds and heavíer feed pressures. 1 1 V, 1 Vz and includíng 1. , and 2 widths.
έ
ııarr 1 Your Authorized Marvel Dealer
SAWING 1S OUR ONLY BUSINE H SS B
ARMSTRONG-BLUM MFG. CO.
1-800-472-9464 1п 111ίпoi0 1-800-462-7835
1-708-803-4019
Sa1es 8 Service Center/Warehouses , Mf. Prospecf, 1L 1-800-472-9464 1-708-803-4019
Agawam, MA 1-800-628-8462 1-413-789-1329 Fort Worth, TX 1-817-535-2183 1-817-531-1763
Auгoгa, CO 1-303-324-5644 1-303-360-5791
, Bίгmίпgham, AC 1-205-956-2232 1-205-956-2655
Redmond, WA 1-206-885-0849 1-206-885-1024
Manutasturing Faciiities
Agawam, MA oshkosh, W7 Armstrong-B1um Mfg. Co. 1993 Catalog CT-13 Dίгecт Sa/es Managers and Technical Specialísts in Major Citŕes

weld line to absorb cuttíng stresses created by more aggressive cutting action. Stronger, tougher Ь1ade plus 8 Hard Back Carbon Míx-Tooth. Combіne the advantages of
Cobalt Matrix tooth tip assures longer, more accurate cutting. Mix-Tooth configuration with high caгbon steel metallurgy to
3/4 , 1 11/4. 11/2 , and 2, wídths. províde excellent performance and extended b1ade lífe in a
wide variety of sawing applications. Vz , 3/4 and 1 widths.
, Eagle Beak Plus Cobalt Mix-Tooth Positive Rake. Positive iІІ. rake teeth, higher Cobalt content, 67-69 Rockwell C. plus Hard Back Carbon. Hardened back provides greater beam
Mix-Tooth pítch make this b1ade ideal for high production strength for more accurate sawing. Raker, Hook, Skip and
sawing of high chrome alloys, stainless, exotics, 3/a , 1 11/4 Wavy tooth styles in widths from up to and including 1.
, 2, and 25/e widths. , Flexíble Back Carbon. Recommended for Contour and fríc-M-42 Cobalt Mix-Tooth. Recommended for cutting solids in tion sawíng at speeds over 3000 sFPM. available in Raker,
the higher alloys. Delivers exceptional performance under Hook, skip and Wavy tooth styles in wídths from up to
high blade speeds and heavíer feed pressures. 1 1 V, 1 Vz and includíng 1. , and 2 widths.
llar 1 Your Authorized Marvel Dealer
SAWING IS OUR ONLY BUSINE H SS B
ARMSTRONG-BLUM MFG. CO.
1-800-472-9464 1п 111ίпoi0 1-800-462-7835
1-708-803-4019
Sa1es 8 Service Center/Warehouses , Mf. Prospecf, 1L 1-800-472-9464 1-708-803-4019
Agawam, MA 1-800-628-8462 1-413-789-1329 Fort Worth, TX 1-817-535-2183 1-817-531-1763
Auгoгa, CO 1-303-324-5644 1-303-360-5791
, Bίгmίпgham, AC 1-205-956-2232 1-205-956-2655
Redmond, WA 1-206-885-0849 1-206-885-1024
Manutasturing Faciiities
Agawam, MA oshkosh, W7 Armstrong-B1um Mfg. Co. 1993 Catalog CT-13 Dίгecт Sa/es Managers and Technical Specialísts in Major Citŕes

The original leaflets are for sale. A preview is shown. The price of the leaflet is on request.

Download document

Machine not in stock?

We inform you with new machines via our Alert Services

Do you want to sell your machine?

Direct cash for your machine(s)

Back to overview