Mcm T CNC Lathes

Mcm T  CNC Lathes
Models: T180 - T215 - T255

Model: T 180
Height of centres: 180 mm
Swing over bed: 360 mm
Swing over cross slide: 190 mm
Distance between centres: 1000...1500
Width of bed: 290 mm
Spindle bore: 52 mm
Spindle nose: 6*
Infinitely variable spindle speeds (Inverter): 6 ranges from 60 up to 2000 гpm
Main motor power: 4 Kw (5,5)
Longitudinal feeds: 0.05-1.88 mm/rev
Transversal feeds: 0.02-1.084 mm/rev
Range of top slide feeds: 0.02-2.4 mm/rev
Metric threads: 0.45-20 mm
Witworth threads: 380-1.75 TPI
Modular threads: 0.25-10 mm
Diametral pitch threads: 160 31/2 D.P.
Cross slide : Length x Width: 370 x 190 mm
Top slide : Length x Width: 275 x 115 mm
Travel of top slide: 120 mm
Diameter of tailstock quill: 60 mm (200)
Travel of tailstock quill: 135 mm
Taper hole of tailstock quill: 4 morse

Model: T 215
Height of centres: 215 mm
Swing over bed: 430 mm
Swing over cross slide: 240 mm
Distance between centres: 1000...1500
Width of bed: 290 mm
Spindle bore: 52 mm
Spindle nose: 6*
Infinitely variable spindle speeds (Inverter): 6 ranges from 60 up to 2000 гpm
Main motor power: 4 Kw (5,5)
Longitudinal feeds: 0.05-1.88 mm/rev
Transversal feeds: 0.02-1.084 mm/rev
Range of top slide feeds: 0.02-2.4 mm/rev
Metric threads: 0.45-20 mm
Witworth threads: 380-1.75 TPI
Modular threads: 0.25-10 mm
Diametral pitch threads: 160 31/2 D.P.
Cross slide : Length x Width: 370 x 190 mm
Top slide : Length x Width: 275 x 115 mm
Travel of top slide: 120 mm
Diameter of tailstock quill: 60 mm (200)
Travel of tailstock quill: 135 mm
Taper hole of tailstock quill: 4 morse

Model: T 255
Height of centres: 255 mm
Swing over bed: 510 mm
Swing over cross slide: 310 mm
Distance between centres: 1000...1500
Width of bed: 290 mm
Spindle bore: 52 mm
Spindle nose: 6*
Infinitely variable spindle speeds (Inverter): 6 ranges from 60 up to 2000 гpm
Main motor power: 5,5 Kw (7,5)
Longitudinal feeds: 0.05-1.88 mm/rev
Transversal feeds: 0.02-1.084 mm/rev
Range of top slide feeds: 0.02-2.4 mm/rev
Metric threads: 0.45-20 mm
Witworth threads: 380-1.75 TPI
Modular threads: 0.25-10 mm
Diametral pitch threads: 160 31/2 D.P.
Cross slide : Length x Width: 370 x 190 mm
Top slide : Length x Width: 275 x 115 mm
Travel of top slide: 120 mm
Diameter of tailstock quill: 60 mm (200)
Travel of tailstock quill: 135 mm
Taper hole of tailstock quill: 4 morse

Infinitely variable spindle speeds (inverter + potentiometer + RPM counter display)
Air on the tailstock to ease the displacement along bed
Double mechanical clutch
Electromagnetic brake
Rapid feeds
Monolithic bed
Motorised small tool post
Tailstock displacement along bed by handwheel and rack
Hydraulic clutch
Hydraulic brake
Motorised tailstock displacement along bed
Rotating tailstock quill
Electric plant with low voltage control panel and with main brand components such as Siemens/Schneider
Spindle reduction sleeve
2 dead centres
Plexiglas safety chuck guard with micro switch
Small tool post guard with plexiglas screen
Full rear length splash guard
Leadscrew and feed bar protected by photocells
Emergency button
Chips collecting tank on wheels
Complete cooling system
Lubrication system for longitudinal and cross slideways fed by a manual pump
Steady rest
Follow rest
Service tools
Test certificate
Full electric diagram
Instruction and maintenance book
Machine built according to CE standards
Tool holder turret
3/4 jaw self-centering chuck
4-jaw independent chuck
Revolving centre
2-3 axis digital readout
Special steady rests
Constant cutting speed
Taper turning attachment
Slideways automatic lubrication pump
Work area lighting
Grinding attachment