Mep 352 MA falcon Sawing machine

352/MA
FALCON 352, manual sawing machine to cut metals from 45° right to 45° left using an HSS blade. This hígh performance model has a heavy cast iron structure and is equipped with all the devices and fımdions necessary ѕo as to cut in a precise and safe manner
FALCON 352 is available as a bench model or eventially with the steel base, with a speed three-phase motor.
Furthermore upon request it can be supplied with an automatic vice (FALCON 352 MA, so that the vice closes automatically when loweríng the head).
In the MA version the machine is always supplied complete with steel6ase.
A FEW FEATURES:
- Worm screw shaft mounted on a pair of bushings.
- Externally adjustable clutch.
- Clamping system by means of vice screw which slides on taper slide with adjustable gib.
Electric submerged pump at 48 V to labor-refrigerate blade.
- Adjustable stop to make cuts of the same length.
- The machine is supplied without saw blade.
- Service keys and instructions manual for maintenance and spare parts list in the language of use.

COBRA 352, maпual sawing machine to cut aluminium and light alloys using blade with electrowelded hard metal plates. The machine cuts from 45° right to 45° left with the head which can be tilted from 0° to 45° 1eft.
On the mode1352 MA (pneumatic vice), which is supplied complete with steel6ase, the vices close automańcally when lowering the head.
A FEW FEATURES:
- Rotating table mounted on bearing for a smooth and precise rotation.
- Adjustable mechanical stops at 0° and 45° left/right to position the head quickly.
- Chip conveyor is predisposed to mount a chip collector.
-Automatic device to lubricate 61ade.
- Materíal has clamped by means of two vices which can be freely positioned along the longitudinal axis of the material.
- Head locking system.
-Adjustable stop to make cuts of the same length.
The machine is supplied without saw blade.
- Service keys and instructions manual for maintenance and spare parts list in the language