This machine is sold
Metal cutting AMF Spanntechnik - K20
Zero point station with 4 elements (2x) MACH-ID 7029| Make: | AMF Spanntechnik |
| Type: | K20 |
| Year: | 2016 |
- Holding force 55 kN
- Locking force 17 kN
Application:
The assembly element is used to clamp workpieces or fixtures with repetition accuracy directly onto the pneumatic clamping modules K10.3 and K20 using pull-studs.
This clamping system can be used to move workpieces to the required machining height in the machine for 5-sided machining, or for the safe and quick clamping of workpieces with ledges and different clamping heights on the machine table.
Thanks to the quadruple 90° indexing option, workpieces under large machining forces can be secured to prevent radial distortion.
Advantage:
Simple, quick and flexible clamping of complex workpiece contours on the machine table. Especially suitable for levelling workpieces or clamping fixtures at the necessary machine heights in the machine tool and for the reliable clamping of same.
Specifications
There are no specifications for this machine (yet).
Dimensions (Estimate)
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Recently viewed machines
Back to overview
