MFL rta 120 ring splitting machine, PIPE BEVELLING MACHINE, DEEP DRILLING MACHINE

RING SPLITTING MACHINE
The ring splitting machine type RTA 120/1000-22 ís used primarily in ring rolling mi11s to separate multiple rings. The maximum initial height of the multiple ring is 600 mm.
1t is cut into segments of 38 to 300 mm. The current ring díameter ís 500 mm to 1200 mm. Of course the machine can also be designed to process larger
multiple rings.
This patented machine can increase production and quality considerably.
Cutting process Manipulation Separated ring segments
Advantages for the user:
- Optimal work load of the rolling mill by subsequent separation of the rings by the ring splitting machine
- Cost-saving production of rings with a low initial height
- High plane parallelism and nearly burr free surface of the produced rings
- Short cycle times and resulting of this an increased output
- Dry working process
- Short chips

PIPE BEVELLING MACHINE
The pipe bevelling machine is used for deburring of unmachined pipe ends. It adds different kinds of chamfers to the pipe ends.
Type 1
Pipe outer diameter: 10 - 60
Tube length: 18000 mm
Output: up to 25 pipes per hour
Type 2
Pipe outer diameter: 20 - 120
Tube length: 18000 mm
Output: up to 20 pípes per hour
DEEP DRILLING MACHINE
The deep drilling machine is used for reboring and deep boring core drilling/fu11 material drilling of heating pipes. MFL guarantees a straìghtness of the drilling of mm on a pipe length of up to 12 m.
síngie spindie machíne for reboríng and boring full materíal
Drilling diameter reboring: 120 - 1000 mm inner Ø 12200 mm tube length
Drilling diameter boring: 250 mm inner Ø full material 12200 mm tube length
Multíple spíndle machíne for reboríng and boring full materíal
Drilling diameter reboring/boring: 30 - 60 mm inner Ø full material 4000 mm tube length
Drilling diameter reboring/boring: 60 - 120 mm inner Ø full material 6000 mm tube length

SAW BLADES
The saw blade with exchangeable carbides is a new and already patented development of MFL.
Advantages for the user:
- Less investment costs compared to brazed saw blades because a lower number of saw blades is required for the running operation
- No grinding centre and transport to grinding shops is necessary

- lncreased life time / productivity by an individual coating
of the carbides
- Optimum adjustment to special materials is possible
MILLING TOOLS
The milling tools consist of a base body which is equipped with exchangeable cassettes. These cassettes include the cutting tips.
The milling tools are used for the welding seam preparation and for the preparation of different profile shapes.
Advantages for the user:
- Preparation of different profile shapes with one base body only because the base body can be equipped with different cassettes
- Exchangeable cassettes protect the base body from damage in case of a crash only the cassettes have to be exchanged - Cost saving

PERFECTION IN ALL AREAS