Pegas band saw machines

DESCRTIPTION OF THE MACHINE
Semi-automatical, hydraulically operating bandsaw machine PEGAS 295
PROFESIONAL is a very productive machine for cutting steel materials (incl. tool and stainless steels), non-ferrous and light metals. The machine is designed for cutting either perpendicular or angular cuts. Angular cuts are set continuously
from —45 ° to +60 °.
The machine is constructionaly designed in that way, so that ít corresponds to extreme exertíons in productive conditions. That is why all carrying parts are made as cast-iron castings (solidity, damping of vibrations and stops). The machine is equipped with an hydraulical centrale and an electrical control which arranges semi-automatical cycle.
STANDARD EQUIPMENT
three-phases two-speed engine * worm gearbox * base with a tank for chips *
cooling * hydraulical unit * terminal switch of band tension * terminal switches for
setting working position * leading the band in hardmetal platles * hydraulically
operating vice * thermo protection against overloaded engine * control 24V

TECHNICAL DATA
Purpose of the machine: PEGAS 295 PROFESIONAL is appointed for normal
working conditions.
-band3010x27x0,9mm
- band speed 37 / 75 m/min
- electrical connection 400 V, 50 Hz
- total power input of the machine 0,9 / 1,7 kW
- equivalent level of sound in place of cutting service LAeq = 798 dB
- transport dimensions: 1,50 x 1 10 x 1 50 m
- weight: 590 kg

ACCESSORIES
- set of spanners for common service
- adjustable stop
- the machine is equipped with one band
EXTRA ACCESSORIES
- rollers and rollers with measuring
- lubricative applicator
- cutting oils
- thrust for cutting in bundles
- bands
MAIN PARTS AND FUNCTIONS
1. Base
2. Arm
3. Hydraulically operating vice for clamping material
4. Turntable of the machine, it carries the arm and allows its turning for angular cuts -45°, 0°, +60°
5. Crank of turntable arrestment. After loosening it is possible to turn the arm
6. Guides lead the band into the exact cut. They content 5 changable plates.
Cooling and lubricative emulsion flow over the guides.
7. Cover of the pulley. When changing the band, take this cover down.
8. Operating panel
9. Band tension
10. Hydraulical cylinder of arm moving
11. Hydraulical unit
12. Springs
13. Emulsion pump
14. Tank for chips
15. Three-phases two-speed engíne
16. Cams for settíng working positíons of the arm
17. Regulation of cutting speed

SAFETY INSTRUCTIONS
Thís machine ís made for cutting steel. It can hurt you easily, please work very carefully.
1. When working with the machíne, follow the safety ínstructions.
2. Follow the poínts lísted ín this usíng ínstructíons.
3. Always use protective gloves and glases.
4. Wear tíght clothes.
5. Wear good workíng shoes with antískíddíng soie.
6. Using ínstructíons have allways handy.
7. Work with the machine only when ít ís ín a perfect condítíon.
8. Use the machine only when all protective parts are on their places and when are
working. You can not remove any protective part.
9. Make sure, that the machine is well installed and that is well connected to the
electricity. ( It can be done only by a qualified person.
10. Controll and repair of el. installation can be done only by a qualified person.
11. Never switch on the machine when all protecting parts aгe nor well closed and fixed,
12. Keep safety distance form all moving parts ( saw-blade, engine, ...)
13. Keep the machine clean.
14. The working room keep free of tools.
15. After finishing your work, switch off the main switch and take out power point from
plug.
16. When solving problems with machine, follow the using instructions or feel free to call our technics.
17. When manipulate with saw-blade, saw-discs, when doing maintenance tasks switch
off the main switch and take out power point from plug.
18. When the saw-blade is moving, no part of your body can be in its working zone.
19. When having any problem, breakdown, press immediately CENTRALSTOP.
20. When the machine is working, it can not be manipulate with other parts of machine.
21. Use only recommended saw- biades, saw- discs.
22. Support long rods in front of the machine and also behind it.
23. It is prohibited to cut material that is bigger than a cutting capacity of machine, this machine is only for cutting steel, metals and plasts.
24. Be very carefull espacially when cutting and taking away short pieces.
25. Never put material to the machine when it is working.
26. Before starting cutting cycle, you must test one cycle without material to make sure,
that the machine is well set.
27. Check good work of machine, from time to time check the work of machine when working on its maximum ( max. speed of saw-blade, saw-disc, max. feed rate, max. feed).
28. Check, if the vice is well set before fast tightening (tolerance 1-5 mm), if the material
is well tightened.
Always work very carefully and avoíd all dangerous sítuations.