Pilous CTR log band saw

Pilous CTR CTR log band saw 

CTR 500
CTR 700
Max. log diameter
Saw blade stroke 
Cutting length of basíc versíon
Extensíon sectíon
Drivíng wheel motor
Motor of vertícal feed 
Motor ot horizontal teed 
Machine length (basíc versíon)
Frame width
Max. height
Max. width
Saw band
CTR 500 Horizontal and vertical band saw arm feeds are hand.operated
• Simple to operate • Aп extraordinarily sturdy construction of the band saw arm with cast-iron wheels and the overall sturdy machine design provide for the maximum precision of the cut, a high cutting power, long life of saw bands and the whole machine.
Accessorίer • Vertical log lifting mechanism • Log turning mechanism.
CTR 700 Electronically controlled horizontal and vertical band saw arm feed with continuously adjustable velocity on the frequency converter arranged
on the control desk. It also enables a continuous change of velocity during the cutting depending on the character of the log being cut. The velocity is continuously shown on the display of the frequency converter. The control desk is located on a travelling brídge of
the band saw arm or in the CTR 700 S model it is in a stationary position on the machine frame enabling the control from one spot • An extraordinarily sturdy construction of the band saw arm with cast-iron wheels and the overall sturdy machine design provide for the
maximum precision of the cut, a high cutting power, Iong life of saw bands
and the whole machine.
Aceѕsoгίes: • Digital measurement of plate thickness • lncision equípment
• Vertical log lifting mechanism • Log turning mechanism
πB 40 Band Saw Sharpener. The sharpener s used for sharpening band saws with
abrasive disks • The whole sharpening cycle - the feed and the tooth sharpening - are carried out by a single movement of the lever between the adjustable end-of-travei positions •Very quick and simple operation. • EnabIes sharpening of all tooth types • Spacesaving as a result of the vertical position of the sharpened band saw.
hi 50 Baπd Saw Sharpener. The sharpeneг is used for sharpening band and disk saws in a semi-automatic cycle
• The change of pitch and profile of the sharpened teeth is done by hand • The
abrasive disk and the feeding mechaπism of the saw band (disk) are driven by electric motors - the sharpening is automatic 
• The sharpener is equipped with a pump for cooling band saws during sharpening.
180 Band Saw Sharpener. The sharpeneг is used for sharpening band, frame and disk saws in a semi-automatic cycle 
• The change of pitch and profile of the sharpened teeth is done by hand
• The abrasive disk and the feeding mechanism of the saw band are driven by electric motors - the sharpening is automatic 
• Own saw dust extractor.
9W 35 Saw setting equipment. it enables a quick and easy setting of band saw teeth. By the backward lever movement, two teeth are alternately set to the right or the left side 
• By the forward lever movement the band is moved by next two teeth or one tooth is passed and the next two ones are set 
•The sturtly cast-iron design guarantees a long life of the machíne and a precíse tooth setting.