Back to overview

Millutensil MiL263 Die & Mould spotting press Try-out moulds MACH4METAL REIS TUS 7241

This machine is sold

Go to: Machine alert

Hydraulic press Millutensil - MIL 263

MACH-ID 7241

Make:	Millutensil
Type:	MIL 263
Control:	Siemens TOUCH 277
Year:	2014

Whatsapp question

Table load lower table 46.000 Kg
Table load upper table 20.000 Kg
Minimum Die height 300 mm
Maximum Die height 2400 mm

Equipped with options
Tilting table 180 Gr
Electric paralel control system
X-travel lower base extensions to 2000 mm

Specifications

Metric US Standard

Distance between column 2130 x 2730 mm 2130 x 2730 inch

Hight under roof 2400 mm 94.488 inch

Table Length 2500 x 2000 mm 2500 x 2000 inch

Ram stroke 2100 mm 82.677 inch

Approche speed 80 mm/min. 80 mm/min.

Working speed 8 mm/min. 8 mm/min.

Return speed 50 mm/min. 50 mm/min.

Table rotation 180 U/mm 180 U/mm

Dimensions (Estimate)

Length 7800 mm 307.086 inch

Width 5600 mm 220.472 inch

Height 6510 mm 256.299 inch

Weight 56000 kg 123514.7 lbs

Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Share on

Downloads

Download all photos Brochure

Millutensil ML Brochure Blue line.pdf

Share on

The MiL 263 spotting presses for assembly, adjustment, check and reapir for large moulds.

This press is used for splitting, adjusting, maintenance and try-out operations

on dies and moulds (thermoplastics, die casting, thermosetting, rubber and blanking)

The lower table is build in floor pit version

The die & mould spotting presses of the traditional MIL series feature the extensible plate exit on the side, towards the short side of the distance between columns. They are typically used in the plastics, rubber and die casting sectors.
This solution allows tilting on the extensible plate short side up to 70° on both sides. In this version, the upper plate, too, is tilted on the short side from 100° to 180°.

The MIL series provides great advantages compared to other solutions with long side rotation

Better working ergonomics, granting the operator to have easy access to any mould part without the use of platforms;
Much shorter total press height above ground, which often reduces excess costs for foundations;
Wide base press structure with greater stability;
The two mould-halves are located on the same side, so operators have an overview of the whole mould and can work more comfortably

Recently viewed machines

Back to overview

3-axis CNC machine (VMC) cnc machinecenter cnc machinecenter