Taurus Wotan Cutmax 3TT horizontal boring mill

Taurus Wotan Horizontal Boring Mill, structured in cast iron with mechanical control of the counterweight. It has high chip removal capacity, due to the high torque and fully geared headstock. Standard travels are up to X=98 in, Y=118 in, Z=36 in, and W=79 in. Standard table load capacity is up to 22,000 lbs. The machine offers flexibility in CNCs. The main motor, 80 HP, provides power and torque through a geared headstock.

The main motor, with 60 kW, guarantees the availability of power and torque over the spindle box. It has axes identification and is a Table Type Horizontal Boring and Milling Machine. The boring spindle diameters are 120 mm and 150 mm, with boring spindle taper 1S0 50. The milling spindle tool mount is 1S0 60 /So 60 and 1S0 65. The spindle speed ranges from 20 to 3000 rpm/min and has 3 gear stages. The main AC spindle drive, with 100 duty cycles, is 40 HP (30 kW) and 80 HP (60 kW). The machine has a tool holder D1N 69871 and a tool drawbolt D1N 69872.

The table cross-travel is X in mm 1800 and 2500. The headstock vertical travel is Y in mm 67, 1700, 2000, 2500, and 3000. The boring spindle longitudinal travel is Z in mm 600 and 900. The table longitudinal travel is W in mm 54, 1370, and 2000. The feed range for boring spindle Z is 1-5000 ipm mm/min, and the rapid traverse for Z axis is 236 and 6 m/min. The feed range for X, Y, W axes is 1-5000 ipm mm/min, and the rapid traverse for X, Y, W axes is 393 and 10 m/min. The table feed range for the B-axis rpm/min is 0-3.0, 0-2.0, and the rotary table size is 1120 x 1400 and 2000 x 2000. The max table load capacity is 13,230 lbs (6000 kg) and 22,050 lbs (10000 kg). The support diameter is 38, 970, and 1490 mm. The table positioning resolution is degree x 0.001. The T-slot table center for reference is 22H7, H7, and 28H7. The machine geometry is according to D1N 8620, with a positioning accuracy of VD1/DGQ 3441 in mm of 0.018 and a repeatability of VD1/DGQ 3441 in mm of 0.005. It also has circular interpolation. The installation area is approximately 16 x 13 ft (4.9 x 4.0 m) and the net weight of the basic machine is approximately 35,654 lbs (16170 kg) and 7,836 lbs (30770 kg).