Timesavers 50-19MW deburring/film finishing machine

Timesavers 50-19MW deburring/film finishing machine

Since its introduction, the compact, highly reliable and affordable Model 50-19MW has turned out profits as fast as it turns out products. Timesavers Model 50-19MW is a metal wet deburring/film finishing machine. It has a wet operation and comes with a base frame, upper frame guard, tank, conveyor belt, filter, main motor, motor feed variator, dryer-blower motor, pump motor, main disconnect switch, guard door interlock switch, emergence PB, and safety tape perimeter switch to stop the machine. It also has a finger safety arrangement.

Specifications of Model 50-19MW include an abrasive belt size of 19 x 48 inches (480 x 1220 mm), conveyor belt of 19 x 68 inches (480 x 1730 mm), part thickness adjustment of 0-2.5 inches (0-65 mm), maximum part width of 18 inches (455 mm), contact roll diameter of 5 inches (127 mm), conveyor variator speed of 10-30 FPM (3-10 m/min), main drive motor of 7.5 HP (5.55 KW), filter media of filter bag cloth, coolant of a 2-10 water emulsion, coolant capacity of 160 gallons (640 L), overall dimensions of 70 x 45 x 80 inches (1.80 x 1.15 x 2.05 m), shipping weight of 2100 lbs (950 kg), electric voltage KW value of 400V -5 -3 h-50H2,rı,8 KW, and control voltage of 110V.

The machine has a serial number and a noise level below 85 dBA, running idle as well as in process. Depending upon the shape, material, and volume of the parts, the noise level may vary. If the noise level becomes higher than allowed, please take sufficient measurements in order to lower the level. For more specifications, refer to the spare-parts list. The issue date for this information is January 1995.