Pama Titan AFP 160 2NC Horizontal boring and milling machine

Pama Titan HORIZONTAL BORING AND MILLING MACHINE WITH SPINDLE-SLEEVE 

MACHINE DESCRIPTION: The machine is a milling and boring machine. The spindle-sleeve contains a gear which is attached to a rotating spindle. It is manufactured to work upon industrial machinery with specific mechanical standards. The surface of the gear box drive is done with a continuous cylinder, which is very heavy and made of steel. The spindle-sleeve fed device consists of a reducer that drives the nut and screw shaft of the milling device.
The feed reciever has an axis Y, and is set up in the manufacturing of the machine. Also, the spindle is set up to work upon several surfaces, including an axis Z, which has a feed box with two electromagnetic clutches for the diversion of an axis. The feed box is driven by a DC motor.

COMMON ACCESSORIES:

Different-sized wrenches

Crank handles for machine drive of feed boxes

NOTE: These are delivered together with the basic machine and are included in the price of the basic machine.

SPECIAL ACCESSORIES:

Vertical milling head 1 piece/machine

Milling head

Milling head support 1

Crank support 1

Chuck nut 

Set-up block 30

Set-up block 2

Boring dust conveyor 7

The machine is equipped with a numerical control system that can outline on three axes: X, Y, and Z. The equipment is made by the pe from DDR.