Trevisan DS 1500 Turning machining center

Trevisan DS 1500 Turning machining center 

View tool magazine with 40 positions.
Two station spindle-holder head unit equipped with facing and turning head and high-speed spindle. The machine center that turns up to 2.5 meters with stationary part.
The machining center combines the advantages offered by stationary-part machining with those of rotating-part machining. The machining center features two machining systems: the 1500mm diameter U-axis contour-head has three tool pocket positions on the travel u-axis slide, suited for small to large diameter turning operations, using the same tool. It can also perform virtually any type of turning operation spherical or tapered turning, as well as boring, back facing, and single-point thread-cutting using standard boring or threading tools. The high-speed spindle, located below the contour-head, is used for milling, drilling, tapping, and other machining center operations. For high-speed boring and turning applications, the high-speed milling spindle incorporates a CNC controlled differential system, for programming tool changeable contour-heads.
During turning operations, the tool works just as a lathe, utilizing constant surface speed to obtain optimum tool life and metal removal. The U-axis contour head is locked in place anytime the milling spindle is in use. Rigid angle heads can be loaded to the spindle from the tool magazine.
This ruggedly constructed machine is designed to include an excellent chip disposal system and a fully enclosed guard system. All internal components of the spindle head are continuously lubricated with a monitored progressive lubrication system. The base frame is a stabilized steel weldment. The spindle head is made of Meehanite cast iron. All axes are equipped with heavy-duty linear bearing slides and are driven by large ball screws with high-performance servo motors. This machining center is equipped with pallets. Mounted and clamped to a fully programmable continuous rotary table, with servo motor drive, and a high precision angle encoder. The machine can be equipped with a diameter RAM with stroke.
The machine can be equipped with a programmable tilt table up to 10 degrees suited for machining of wind power hub components. The tools are mounted on a tool holder base type designed and patented by Trevisan Macchine utensili.This tool holder provides maximum rigidity, since the tool clamps on a wide support surface during work, which allows heavy metal removal operations while ensuring maximum tool stability. The machining center is equipped with a 40-position tool-changer unit fitted with a 2-gripper manipulator. TREVISAN MACHINE