Ungerer cut to length lines

From coil to sheet Selection of materials which can be processed on UNGERER Cut-to-Length Lines: Here it depends on the right mixture. While cutting to length, speed and perfection while accelerating and deceleration is important. Control in the right lacquered and galvanized coated moment. The High Efficiency Roller Levellers and the dynamic Cut-to-Length embossed Shears are a guarantee for smallest cutting tolerances mm and excellent tin plate aluminum flatness with the greatest output possible. stainless steel Material width Limited ancillary time, a big leveling range and the longevity of the blade sets up to 2600 mm up to 20 million cuts with the Rotomatic = Shear are further qualities. Just Material thickness take a look at the technical data. Cut-to-Length Lines Flatness UNGERER Cut-to-Length Lines are made up of a comprehensive Before cutting to length, internal stresses must be corrected by range of highly efficient machines and arrangements for leveling our roller leveler. Existing flatness defects are corrected by data and cutting-to-length metal strips of all kinds. They are known for based adjustments by means of our process guidance system their short changeover and ancillary times, easy handling, low Planomat. maintenance requirements as well as for low operating costs. The UNGERER Unflatness Measuring System FLAT for Cut-to- Length Lines enables a measurement, logging, and correction of the strip and sheet flatness by means of a closed-loop back to the High Efficiency Roller Leveler. Length Tolerances The achievable length tolerance on UNGERER Cut-to-Length Lines is mm. The UNGERER Dimension Measuring System enables to do a measurement, logging, and correction of the cut- ting length. The obtained measuring tolerance 0 mm absolute. Rotomatic - Shear Process Guidance System Drum shear for strip thickness range - mm and strip speed All line parameters are pre-adjusted by a central process up to 300 m/min. guidance system Cutronic - Shear automatic coil positioning crop shear with automatic blade clearance adjustment Eccentric shear for strip thickness range - 4 mm and strip edge trimming and scrap cutting shear with automatic blade speed up to 150 m/min. clearance adjustment roller leveler adjustment Planomat Cutmatic - Shear stacking machine with pre-adjusted stops Swing shear for strip thickness range 2- 13 mm and strip speed up to 50 m/min. Product range Stretch-Bend-Leveling Lines Control system design Planetary gears Development and production of Tension-Leveling Lines Control equipment Crane gears High-End Inverter Technology Cut-to-Length Lines Software development Spur gears System solutions for Drives and Rewinding and Inspection Line Service and maintenance Bevel spur gears Automation Technology Roller Levelers Modification and modernization Change speed gears AC Drive systems with low inertia Edge Trimming and of production lines and machines Special gears Customer-oriented design of Cut-to-Length Shears Unflatness Measuring Systems Drive solutions, components, Dimension Measuring Systems systems, and lines Surface Inspection Systems Development of Hard- and Software