Weiler matador precision lathe

For WEILER Precision Lathes Series Matador  High Precision Toolroom and Production Lathes The highly advanced series LZ 330 lathes meet high precision and high-speed production requirements. Demanding toolmakers value the variable-speed control, production engineers prefer the preselective speed type drive. MATADOR High R-Duty High-Precision Universal Centre Lathe Especially for fast and economical production of small and medium-sized high-class precision components. Built in two versions: Type W with infinitely variable speed control, Type VS with preselective-speed spindle drive. This new catalog has been issued to assist Weiler Lathe Users in selecting the proper accessories and attachments for their requirements. Designed WEILER for use on Weiler Precision Lathes of Series 330, Matador, 300, and 280 lines, the extra equipment listed herein will contribute to achieve maximum pro- duction, reliable performance, accurate work, and high-grade finish. All accessories and attachments are listed in groups as they are fitted on the machine and shown on color-coded pages. Each item has an indi- vidual ordering number, its name being printed in BIG, BOLD LETTERS. The numbering system uses code numbers of seven digits and provides a simple method of identifying the items. The first two digits denote the line of lathes where the particular item is used: The next two digits designate the item classified with reference to the five major groups of lathe accessories as presented in the catalog: Headstock Tooling Red Page section Carriage Tooling Blue Page section Bed Attachments Yellow Page section Tailstock Tooling Green Page section Miscellaneous Equipment Grey Page section In addition to this, the last three digits indicate the coordinated number of the particular item in numerical order. When ordering accessories from this catalog, please always give the full name and item number and mention Catalog No. 2820. In ordering parts for lathes already in service, the model and serial number of the lathe also should be specified. Manufacturers of Precision Engine, Turret, and Plain Lathes, also Bed Type Milling Machines. 330 Matador 300 280 DRIVER PLATE STANDARD Machined to fit threaded spindle nose to DIN-800 design. With pin for driving straight tail lathe dogs. DRIVER PLATE SAFETY TYPE With clamp collar providing protection against run-off, and pin for driving straight tail dogs. Tapped to suit threaded spindle nose. threaded nose. DRIVER PLATE BAYONET-LOCK TYPE Designed with four slots and one detachable pin for driving bent and straight tail type dogs. With four-bolt fixing fitted. 9001 502 9001 502 6 /: - 165 mm. dia. for short-taper nose DIN-55022/5 bayonet-lock spindle. FACE PLATE STANDARD Machined to fit threaded spindle nose. With eight work clamping slots. FACE PLATE BAYONET-LOCK TYPE With eight work clamping slots and fitted with four-bolt fixing for direct mounting on short taper nose  bayonet-lock spindle. mm. dia Matador 1 300 280 INDEPENDENT 4-JAW CHUCK, MEDIUM DUTY STANDARD Plain style, with reversible hardened jaws and wrench. For threaded spindle nose to DIN-800 design. 12-300 mm. dia. 1001 004 INDEPENDENT 4-JAW CHUCK, MEDIUM DUTY BAYONET-LOCK Plain style, with reversible hardened jaws and wrench. For DIN-55022/5 bayonet-lock short taper spindle nose. 10 - 250 mm. dia. INDEPENDENT 4-JAW CHUCK, HEAVY DUTY BAYONET-LOCK American style, with reversible hardened jaws, including wrench. Four T-slots machined in face. For DIN-55022/5 bayonet-lock short taper spindle nose. 8 1/2 - 220 mm. dia. mm. dia. PRECISION 3-JAW SELF-CENTERING CHUCK Geared scroll type, with two sets of hardened jaws, internal and external, and wrench. Backplate required for mounting chuck on spindle nose - not included PRECISION 3-JAW SELF-CENTERING CHUCK WITH BAYONET LOCK MOUNTING fitted, for short taper nose DIN-55022/5 bayonet-lock spindle. Complete with two Geared scroll type, with four-bolt fixing sets of hardened jaws, internal and external, and wrench. Size 5 3/4 - 135 mm.  SOFT BLANK JAWS FOR 3-JAW CHUCK Set of three blank jaws of geared scroll type, made of selected steel, soft, ground all over. 

PRECISION 4-JAW SELF-CENTERING CHUCK Geared scroll type, with two sets of hardened jaws, internal and external, and wrench. Backplate required for mounting chuck on spindle nose not included. PRECISION 4-JAW SELF-CENTERING CHUCK WITH BAYONET-LOCK MOUNTING Geared scroll type, with fitted four-bolt fixing to suit short-taper nose DIN-55022/5 bayonet- lock spindle. Complete with two sets of jaws, internal and external, and wrench. SOFT BLANK JAWS FOR 4-JAW CHUCK Set of four blank jaws of geared scroll type, made of selected steel, soft, ground all over. BACKPLATE STANDARD Machined to fit threaded spindle nose to DIN-800 design. Unfinished on face. Without holes for mounting chuck. 330 Matador 300 280 BACKPLATE SAFETY TYPE With clamp collar providing protection against run-off. For spindle noses of threaded type to DIN-800 design. BACKPLATE BAYONET-LOCK TYPE Machined and fitted with four-bolt fixing for DIN-55022/5 bayonet-lock short taper spindle noses. HEADSTOCK 60 MALE CENTRE Hardened and ground, with draw-in type collet shank. For use with No. 1301-011 handwheel type collet attachment handwheel type collet attachment. 9001 529 -- HEADSTOCK FEMALE CENTRE 60 Hollow, hardened and ground, with draw-in type collet shank. For use with No. 1301-011 handwheel type collet attachment. For use with No. handwheel type collet attachment. TAPER-BORE ADAPTER No. 2 MORSE Hardened and ground tool steel, with draw-in type collet shank. For use with handwheel type collet attachment, also with No.  lever-operated tailstock and tailstock handlever boring attachment. For use with handwheel type 9001 540 collet attachment, also with tailstock handlever boring attachment. 5 330 Matador 300 280 TAPER-BORE ADAPTER No. 3 MORSE Hardened and ground tool steel, with draw-in type collet shank. For use with No. 1201-002 handwheel type 9001 543 collet attachment, also with No. 1204-001 tailstock handlever boring attachment. a TAPER-BORE ADAPTER SLEEVE No. 1 MORSE Hardened and ground, style push type collet. Used with No. 1304-001 tailstock handlever 9001 630 attachment. TAPER BORE ADAPTER SLEEVE No. 2 MORSE Style push type collet. Used with 9001 581 tailstock handlever boring attachment.
HEADSTOCK CENTRE SLEEVE No. 5- No. 3 MORSE ^ Plain style, of alloy tool steel hardened and 9001 542 ground all over. HEADSTOCK CENTRE SLEEVE No. 5- No. 3 MORSE WITH PUSH-OFF NUT Sleeve of alloy tool steel hardened and ground all over. HANDWHEEL TYPE COLLET ATTACHMENT Complete with hollow draw bar, spindle nose cap with fitted ring type collet locator key, and pin-type wrench for spindle cap.  For use with draw-in collets. For use with No. 9001-550 draw-in collets. HANDWHEEL TYPE COLLET ATTACHMENT Complete with hollow draw bar, tapered collet sleeve with locator key fitted, spindle nose cap, and pin-type wrench. For use with draw-in collets, For use with No. 9001-558 draw-in collets, 330 Matador 300 280 HANDLEVER DRAW-IN COLLET ATTACHMENT Quick-acting ball closer type, with lever control from headstock end. For threaded nose: Used with all style W-28 collets. 1201 002 For short taper nose: Used with all style 5-C collets.  ldem Used with all style K 32 collets.  HANDLEVER PUSH-TYPE COLLET CHUCK Quick-acting, spindle nose mounting type, with backplate fitted to suit threaded nose, including assembly parts. Used with style F-25 collets.  DRAW-IN COLLETS Metric sizes for round stock. Set of 43 collets, 1 mm to 22 mm round max. full-bore 16 mm by 1/2 mm, style LZ 280. 9001 549 Set of 49 collets, 1 mm to 25 mm round max. DRAW-IN COLLETS English sizes for round stock. Set of 19 collets, 1/16 to 3/8 round by 32nds, style LZ 280. 9001 554 Available also with stop-bore in sizes up to 1 dia. Set of 27 collets, 1/8 to 3/8 round by 32nds, style W-28. Available also with stop-bore in sizes up to 1/2 dia. Set of 31 collets, 1/8 to 1 round by 32nds, style 5-C. 9001 553 9001 553 DRAW-IN COLLET BLANKS Styles same as above. Semi-finished, with  soft head, unslotted and unbored. 330 Matador  DRAW-IN COLLETS Made of selected steel like all other collets, heat treated and hardened, precision ground inside and outside. Metric sizes for round stock. Set of 49 collets, 3 mm to 27 mm round by 1/3 mm, style K 32. DRAW-IN COLLETS English sizes for round stock. Set of 31 collets, style K 32. DRAW-IN COLLET BLANK Semi-finished, with soft head, unslotted and unbored, style K 32. PUSH TYPE COLLETS Used with No. 1301-009 lever collet chuck. For round stock. Set of 39 collets, metric sizes from 1 mm to mm round by 1/2 mm, style F-25. Set of 23 collets, English sizes from 1/8 to 9001 580 3/4 round by 32nds, style F-25. Collet Blank, semi-finished, with soft head, 9001 634 unslotted and unbored, style F-25. HEXAGON SIZE DRAW-IN COLLETS CLOSERS FOR EXTERNAL STEP CHUCKS Screw-On Type Closing Collar, to fit on threaded spindle nose. Tapered Closing Sleeve, to fit in spindle taper bore. 

4 cm INTERNAL STEP CHUCKS For holding disc-shaped parts. Steps finished ., to size, hardened and ground. style W-28. Size 4 100 mm, max. step diameter, Size 4 100 mm, max. step diameter, style CLOSERS FOR INTERNAL STEP CHUCKS Screw-On Type Closing Collar, to fit on 9001 582 1301 013 threaded spindle nose. Tapered Closing Sleeve, to fit in spindle 9001 583 9001 583 taper bore. BACK STOP Provided with collet-type expansion bushing to fit into rear end of headstock spindle, adjustable stop rod and collar. Used for locating duplicate parts held with jaw chuck and projecting into spindle bore. BACK STOP To fit in draw-tube of lever collet attachment. For secondary operations on collet work. HEADSTOCK DIVISION PLATE Large diameter type, for mounting on threa- ded nose spindle. Plate provided with seven rows of holes  including spring index finger and parts for VERTICAL SLIDE REST travel 4 = 100 mm, by Acme feed screw fitted with crank handle and micrometer dial. Arranged with metric graduations reading ı[ ldem Arranged with English graduations MACHINE VICE For use on vertical slide rest. With ground tool-steel jaws, operated by Acme thread screw. Replaceable sliding jaw, with V-slots machined on face, running on round guides. Base provided with four bolt slots. Jaws 2 3/4 70 mm wide, 1 25 mm deep. Plain style, enabling simple dividing jobs, for use on vertical slide rest. Provided with precision ground hollow index spindle for holding work in draw-in collets, with closing by handwheel. Complete with spring index . finger and one 24-hole index plate.

DIVIDING ATTACHMENT Provided with precision ground hollow index spindle for holding work in push-type collets, with closing by cap nut. Complete with spring-loaded index plunger and one 24- notch index plate. Arranged for collets, style F-25. 1302 002 330 Matador 300 280 ADJUSTABLE SINGLE-TOOL POST For turning and boring. Open-sided tool- holder of the inset type with clamp bolt fixing, and provided with two set screws for ad- justing height of cutting edge. Including T- wrench. Complete with adapter block 3 1/2 90 mm long for stud bolt mounting. Takes 9002 507 9002 507 9002 507 cutter bits /τ 12 mm square or smaller. QUICK-RETRACTING THREADING TOOL POST Designed especially for cutting R. H. threads. Inset type open-sided toolholder actuated by eccentric lever, with stop screw provided for stroke adjustment. Including adapter block, knadit/2-wrench, and front lock nut for mounting. REAR CUT-OFF TOOL POST Additional, for cross slide. T-bolt mounted tool block, with set screw for cutting edge adjustment, and clamp-bolt inset type cut-off tool holder fitted. Including one HSS cut-off blade 15 x 3 x 120 mm. 9002 526 9002 526 9002 526 9002 526 Less base plate. SUPPLEMENTARY FLAT TOOL HOLDER Inset type, fitting in rear cut-off tool post, for 9002 527 9002 527 9002 527 9002 527 cutter bits up to 1/2 12 mm square. TOOL BASE PLATE For mounting rear cut-off tool post. Provided with milled T-slot to hold and adjust tool post parallel with centerline, and two bolt- 1002 028 1102 004 1202 002 1302 006 down holes. When ordered with lathe, it is factory fitted to cross slide. ELECTRIC GRINDING ATTACHMENT Complete, with high precision grinding spindle, compound rest mounting bracket, hinged HP 3-phase motor 3,000 rpm 50 cy. with switch and cord, wheel guard, 2 textile belts and 2 pairs of pulleys. Speeds 6,000 and 30,000 rpm. Including one wheel 4 x 5/8 = 100 x 8 mm with adapter chuck, one arbor fitted grindstone 1/2 10 mm dia., and three wheels 5/8 8 mm, 1/2 12 mm 9002 528 9002 528 9002 528 9002 528 8 16 mm dia. with mandrels. When ordering, specify characteristics of current. TAPER TURNING ATTACHMENT Telescopic type, as illustrated, mounted on rear of carriage. For turning and boring tapers up to 20 included angle, 12-300mm in length at one setting. Quickly disengaged, when changing to straight turning. Idem Follower type, with swivel bar arranged at the front, including compound cross slide to fit in place of regular compound rest. Max. taper 30 included angle, length Descriptive catalogs available. PLAIN CROSS-SLIDE STOP Of the T-shaped bar type, placed at the right side of cross slide. For use with power and hand feed. With stop block adjustable on T-bar, and stop bracket with adjusting screw, carried at the carriage bridge, including socket headed mounting screws. When ordered with new lathe, the stop assembly is mounted at factory. FOUR-POSITION CROSS-SLIDE STOP For use with power and hand feed. Complete with T-bar and stop block, indexing stop roll bracket with adjustable screw stops. Including socket headed screws for mounting. Range 2 - 50 mm from short to long stop. E Mounted at factory when ordered as original equip- ment with new lathe. I TRAVELLING STEADY FOLLOWER REST Two-point type with adjustable machined Adjustable, for wood turning and pattern making. Complete, with lever quick-lock type clamp base locating across the bed ways, 1003 001 1103 001 9003 501 9003 501 including T piece 43/120 mm wide. SAW ATTACHMENT Includes stem-mounted cast iron saw table with adjustable guide fence and plain stock- pusher, clamp base unit as used with hand rest, and one saw blade arbor of draw-in collet shank type for circular slitting saws HALF CENTRE No. 3 MORSE Hardened and ground, for tailstock. 60 REVOLVING CENTRE No. 2 MORSE for tailstock, with grease sealed heavy-duty precision bearings. 9004 501 60 REVOLVING CENTRE No. 3 MORSE With heavy-duty bearings, for tailstock. SCREW-FEED TAILSTOCK SPINDLE WITH KNOCK-OUT KEY SLOT Interchangeable with regular screw type spindle in tailstock furnished as standard equipment with the lathe. Accurately ground. With Morse taper bore, graduated by 1 mm increments. Idem Graduated by 1/2 mm increments. With No. 3 Morse taper bore, graduated by 1 mm increments. HAND-LEVER-OPERATED TAILSTOCK Complete assembly, on set-over base with quick-lock lever for clamping to inner bed- ways. Fitted with hollow spindle of 4 100 mm stroke, including handwheel draw- bar, for use with draw-in collets. When ordered with lathe, it is fitted at factory to lathe bed and matched to headstock. HANDLEVER TAILSTOCK BORING ATTACHMENT Interchangeable with regular screw-type tail- stock spindle assembly. Consists of replace- ment end cover with hinged operating lever, handwheel draw-bar, and hollow spindle of mm stroke. Using draw-in collets, HANDLEVER TAILSTOCK BORING ATTACHMENT With operating lever, link joint and mounting bolt to fit in tapped hole provided on a boss of tailstock casting. Hollow tailstock spindle provided with pin spanner actuated closing cap nut. Using push-type collets PLAIN TAILSTOCK BORING STOP Split collar type, locked by set screw. Clamps on rear end of hollow spindle of handlever tailstock attachment. Used to regulate pred- etermined lever stroke for drilling, boring, FOUR-WAY TAILSTOCK BORING STOP With adjustable stop screws. Can be assembled in place of regular ring-type joint bracket holding handlever of tailstock boring attachment. THREADING DIAL For use when cutting English threads. Can be assembled on the right side of the apron. Suitable only for lathes being equipped with 9005 501 9005 501 9005 501 9005 501 lead screw of 4 TP1 pitch. When ordered with new lathe, it is supplied fitted. COOLANT SYSTEM Independent, with movable tank, coolant pump with 1/2 HP 3-phase, 50 or 60 cy., std. voltage motor and toggle switch, piping  and fittings, wired up entirely. Idem Complete, with pump motor co-

trolled by rotary switch installed on control 1005 001 1105 001 panel in machine base. Idem Stationary type, including flanged pump with motor and toggle switch. Used 1305 001 on Model LZG 280 N lathes only. TOOL TRAY With hinged lid. Including ground rod stand, fitting in locating pad provided at rear rim 1005 002 1105 002 1205 002 1305 002 of lathe chip pan. MACHINE LAMP Articulated, with metal shade and switch. Complete with mounting bracket, cord and plug less bulb. Provided at rear rim of lathe chip pan. Machine Lamp with flexible gooseneck and magnetic base, including switch, cord and plug less bulb. MOTOR PROTECTION SWITCH for three-phase installation, enclosure type, providing thermal overload release.

Weiler reserves the right to make changes, without notice, in design, materials, equipment, and specifications. High-Duty Precision s. s. S. C. Centre Lathes LZ 1300 C Incorporating outstanding features of the LZ 280 series line, the range of LZ 300 lathes offer choice of pre- selective speed drive suited to batch manufacturing use, or variable speed drive for single component work. Centre Lathes LZ 1280 The series LZ 280 lathes have earned the WEILER name an international renown. For their precision per- formance, efficiency and versatility, they are accepted in thousands of plants as well as in research and training centers.