Weiler VO Radial drilling machine

Weiler CNC Lathes Service Lathes / Semi-Cycle Controlled Lathes Cycle-Controlled Lathes Radial Drilling Machines Machine Frame Electrical Equipment The main part of the machine frame is made of high-quality grey The clearly arranged operating panel with an EMERGENCY STOP cast iron. The main frame has a clamping surface to enable the button and switches for the main functions is located on the headstock. attachment of workpieces, tables, and fixtures. The guideways on Standard electrical configuration according to EN 60204-1 the housing and vertical arm are hardened and ground, and the Standard operating voltage 3 x 400 V/ 50 Hz. opposite surfaces are scraped. Headstock and Drive Heavy-duty grey cast iron housing with extendible spindle sleeve. The drilling spindle is hardened and runs in permanently lubricated precision bearings that ensure high concentric accuracy and smooth running. The headstock is fixed to the swiveling arm through a hydro- mechanical clamping device. The spindle speeds and feed rates are selected through an operating panel. With selection occurring through the spindle starting lever. The drilling depths are set through a fixed stop and rotating depth scale. The permissible drilling performance is monitored through a safety feed clutch to prevent the machine being overloaded. A starting clutch ensures that the spindle is started softly and smoothly. The spindle is braked and stopped through a magnetic brake on the shaft below the motor. Dimensions Machine with Traversable Supports The V0100 and V0104 radial drilling machines are available as VOP100 and VOP104 versions with supports that can be moved along the heavy-duty machine bed. The standard traversing range of the slide is 4500 mm, which can be optionally increased through an additional traversing path of 3500 mm. Versions with a number of drilling units on a common machine bed are also conceivable. Heidenhain Position Readout 2-axes position readout For horizontal headstock position and swiveling arm angle position 3-axes position readout For horizontal headstock position, swiveling arm angle position, and sleeve travel Standard Features Heidenhain 2-axis position readout. Motorized Headstock Setting Machine lamp Heidenhain 3-axis position readout only for V0100 and V0104 Platform for operation and maintenance Adapter sleeve The motorized headstock setting assists the operator Knock-out wedges Anchoring materials with stone bolts when moving the headstock on the swiveling Groove cleaner Anchoring materials with anchor bolts and arm. The movement in the required direction is Oil can adhesive cartridge executed through corresponding push buttons. Push-type grease gun Version for tropical conditions TH32 Rapid movement can be carried out through an Set of operating tools Electrical equipment for other mains supplies additional push button. Transport locks than 400 V/ 50 Hz Operating manual and spare part catalog Special paint finishes Motorized Sleeve Turning only for V0104 Electrical stop for thread cutting The sleeve with the swiveling arm can be turned only for V075 either with a motor or manually. The motorized Accessories / Options Strengthened main drive 15 kW turning movement is controlled through directional only for VO100 and V0104 Coolant device with tank push buttons on the operating panel. The brake Motorized headstock setting Clamping block Vb8 is automatically applied when the push button is only for V0100 and V0104 Tilting table Vc8 released. For the manual turning of the sleeve, Motorized shell turning only for V0104 Clamping vice 160 mm there is an additional push button that allows Frequency-regulated main drive the brake to be released prior to movement. Technical Data Max. drilling diameter in with standard versions of VOP machines, the traversing range is 4,500 mm Cycle-Controlled Lathes Tool Room Lathes / Semi-Cycle Controlled Lathes