Wisconsin Wismatic cnc Turning lathe

wisconsin cnc turning lathe wismatic lcc 560 2000

breaking the rules 
 LCC 560 І 2000
The SPM horízontal lathe is an ideal tool machíne for people wíth production requirements both for single piece and the small or medium seríe.

WISCONSIN TURNING SYSTEMS
AVTOMATIC OPERATION
The cyclеs used are main distinctive aspect of the SPM lathe. These have
been designed to adapt themse ves to the usual working methods of a shop: when making a part, its machining process is divided in a certain
number of operations.
CNC CHARACTERISTICS
To use it, just enter For any type:
in specific parameters: longitudinal, taper or Numerical control for the
begin and end, facing facial.
lathes-conversationally point coordinates,
Linear, circular, helicoidal, depth of pass, safety interpolations, standard
distance.
simultaneously
Two levels are lntuítíve operation without needing avaifable to enter the
programming knowledge necessary parameters,
Profile editor wıth graphic assistance Two levels are and it is also possible
interface available to enter the to choose the type 
Graphic simulation of the machinìng necessary parameters, of rounding: concave 
Teach-in operation according to the or convex.
Constant surface speed avaiiable data.
Diagnostic of program, execution, It ïs also possible to interface errors indicate the tool entry and exit. This is a variation of Compensation of manufacturïng
drílling operatíon, errors, plays, wear of ball screw allowing for the
tapping of previously
With dweil definition. drilled holes.
The dimensions of He1ps to define, the piece are entered cleariy and simply, the directly from the transition from one blue-print. automatic operation to the next one.
WISCONSIN TURNING SYSTEMS STANDARD EQUIPMENT
Control equipment FAGOR type  
Fatring Made of specíal cast iron for Work area líghtíng machíne-tools; ít has four ínductíon hardened and ground Manua1 tool post slide
slideways.
Main spindle nose: 
CAMLOCK

Chip pan
Body ís in cast iron with hígh Adjusting and maíntenance tools
stiffness features. Spindle ís made 
Headstock automatic lubrícation of a specíal steel, thermically
Spíndle reductíon sleeve handled, ground and placed on
2 dead centres high precísíon taper roller
Complete coolíng system bearings. The dríve motor ís a
brushless tуpe, aírcooled.
Forced automatic lubrícation of saddles and screws
Programmed límítíng on X-Z axes 
lnstructíon manual of the lathe
Longítudinal and transversal slides
respectively axle Z and X are
OPTI0NAL5 of cast íron with inductíon
hardened and ground. Slides are
colour screen moved by brushless servomotors
that entraín the ballscrews by
Electríc automatíc turret 
means of a special coupling axís
posítíons Z or by synchronous belt
Manual or hydraulic self-centering gearíng axís 
chuck
Systems for swarf evacuatíon

Steady rest
Follow rest Oil loss lubrícatíon system for 
Líve centre slides and ball screws, with
automatic statíon and volumetrícal
díspensers. Headstock bearíngs
lubrícated by oil re-circulation
with a pump actuated by its own
electrical motor.

The lathe can be used in three dífferent ways:
Tradítional way, using handwheels for axle X and Z.
Auto-teach-ín way, following the drawíng of a piece and
calling the pre-arranged cycles.
CNC way, by an 1S0 programme like a CNC lathe.