Yang MV 5A vertical machinig center

YANG  Vertical machining center 

MV-5A

HIGH PERFORMANCE, HEAVY-
THE HIGH QUALITY MACHINING CENTER: A COMBINATION
MV-5A vertical machíníng center offers hígh performsnce and economy for heavy-duty machíníng of middle and large workpieces of die, machíne, as well as equipment.
Combínes automatíon equípments as FMC to long-term unattended operation.
FEATURES:
H1GH PRODUCTIVITY
Hígh power 11/15kw, Hígh torque kgf m, wíde machíning range
of 1300 X 750 X 750mm suíts for heavy cutting of middle and large
workpieces.
Hígh drílling capabílíty. Z-axís thrust force 2000kgf/100kgf 5min./cont.
ATC mechanism adopts cam type to ensure smooth motion; reduce
the noncuttíng tíme: Tool to tool 3 sec.
32 bíts high functíon CNC control.
Easy to combine the automatíon equípment, APC device, as FMC. It ís
ideally suited to long-term unattended operation.
HIGH PRECISI0N, HIGH RIGIDITY
The machíne structure is made of thé finest qualíty meehaníte cast
iron, whích retaíns íts accuracy.
3P spindle bearings and hígh rigidity combínation offer hígh precísíon
and hígh rigidity of spindle.
Spindle bearíngs lubricatíon adopts grease to exactly control spíndle
temperature. It can additionally install the cooler optíonal accessory to keep down the thermal displacement of spíndle.
Pre-tensíon ball-screw of X, Y, Z axís offers hígh accuracy.
Feed unít adopts close loop control method which detects through optícal scale to ímprove the posítíon accuracy and repeatabílity accu racy.
4-rails base design to ensure the accuracy of table left right movement.
TURCITE B adhered on the surface of slideways features hígh rigidity and dampíng.
COMPACT DESIGN
lntegratíon of inechanísm, electric and hydraulic makes easy layout and saves foundatíon space.
DUTY MACHINING, HIGH PRODUCTlVITY OF HIGH TECHNOLOGY AND CUSTOMER S REQUIREMENT.

AUTOMTIC TWIN PALLET CHANGE FEATURE
1. Enclosed splash quard and chip remover desígned to c1ean the chip completely and ensure the accuracy, reliabílity and safety.
2. The work piece can be pre set on the stand by pallet during machíníng to shorten the work piece changing time and increase the productivity.
3. Quick pallet change, easy operatíon.
4. Powerful clamping force of table, good for heavy cutting.
HARD AND SOLID STRUCTURE RETAINS MACHINING ACCURACY.

Base, column, saddle and spíndle case are made of the fínest qualíty meehanite cast iron, which retaíns its accuracy.
Adopts 4-raíl base design between the base and saddle to assure heavy load support and accurate posítioning over full-movement range.
Wide span between guídeways and massíve guideway assures precision and heavy-duty machining.
Ríbs of ineehanite cast iron body are appropriately arranged to maintain hígh rigídity, stabílity and precísíon.
FEED UNIT
Pre-tensIion ba11-screw of X, Y, Z axís offers high accuracy.
Sensor position adopts close loop control method whích detects through optical scale to improve the position accuracy.
All slideways are covered with Turcíte B , which has a low friction coefficient, decreases has outstandíng dampíng characteristícs.
HIGH PERFORMANCE SPINDLE HEAD FOR HEAVY DUTY-CUTTING
POWERFUL SPINDLE HEAD PRECISI0N SPINDLE UNIT 
Spíndle diameter: Ø100mm.
High power 11/15kw, Hígh torque m.
SP Spíndle bearíng and hígh rígídity combínatíon offers high precísion and high rígidity of spíndle.
Maximum tool clamping force ís 2100kgf, so ít ís suíted for heavy-duty and precísíon machíníng. 
Spindle bearíngs lubrication adopts grease to accurately control spindle temperature. It can additíonally ínstall the cooler to keep down the thermal displacement of spíndle.
CHARATERISTIC OF SPINDLE POWER VS SPEED DIAGRAM
SPINDLE SPEED
MV-5A CUTTING EXAMPLES:

Max. loadíng capacity 2000kg
Longítudínal X-axís 1300
Cross Y-axís 750
Travel range Vertícal Z-axís 750
Dístance  spíndle nose to table surface 
Distance from spindle center to column 800
Spindle taper IS0 NO. 50
Spíndle Spindle nose outer diameter Ø100
Spindle speed 35^-3500 ґpm
Cuttíng feedrate of X, Y, Z axis  
Feedrate
Rapíd traverse speed of X, Y, Z axís 1 
X-axís servo motor FANUC AC servo motor 20S/1500; KW
Y-axís servo motor FANUC AC servo motor 20S/1500; KW
Z-axís servo motor FANUC AC servo motor 20S/1500; KW
Dríve motor
Spíndle coolant recírculatíng motor 370 W
Centralized lubrícation motor 10 W
Cutting coolant motor 400 W
Chip conveyor motor 90 W
General Net weight 
Gross weight A. specifications are subject to change without notice.
STANDARD ACCESSORIES OPTIONAL ACCESSORIES
1. Working lamp 1. Work piece measurement
2. Spíndle refrígeratíon system 2. Automatíc tool measurement
3. Cooling system 3. Coolant through tool tip Through adapcor on spindle nose
4. 30T Capacíty magazíne 4. Index table
5. Screw type chíp conveyor 5. CNC indexable standby pallet
6. Chip bucket 6. Work pallet twin pallet change
7. FANUC OME control 9 CRT 7. 40 Tool magazine
8. Optical scale 8. Linear scale
9. Too1 kít 9. slíng
10. Operator s manual 10. Rígíd tappíng
11. Maintenance manual 11. M30, M20 lndícatíon light
12. Leveiing pad 12. Foundation bolt and adjustment seats
13. Fu11y enclosed splash guard 13. M80 Automatíc power off
14. FANUC control OMF, 15MA, 15MF
15. 14 CRT
16. Large key board
LARGE TOOL MAGAZINE, RAPID TOOL CHANGE
HIGH SPEED ATC MULTIFUNCTION CONTROL PANEL
ATC mechanism adopts cam type, which is simple The control panel can move, rotate and concentrate and reliable, to ensure smooth motion, reduce the the machine so it is easy to operate. An error alarm non-cutting time. detector display on the CRT assists in ease of Tool to tool changing accomplíshed ín 3 sec. maíntenance and trouble shooting.

HIGH CAPACITY MAGAZINE
Standard tool capacity is 30 tools with the option of a 40 tools capacity magazine.
Tool selection: The shortest path selection Max. adjacent tool díameter: Ø125mm.
Max. tool díameter: Ø250mm non-adjacent tool .
Max. tool length: 350mm.
Max. tool weíght: 20kgf.
NC SPECIFICATIONS Standard, Optíon, included in other optíon, lmpossíble
MAJOR CATEGORY SUBCATEGORY SPECIFICATIONS 15MA 15MF OMC OMF
Controlled axis 3 Axes
Simultaneous controIIed axis 3 Axes
lncrement system mm; inch
F1 digit feed Preset corresponding to the preset feedrate .
Controlled Controlled axes expansion Max. axes 
2пd reference point return G30
A1so applied to additional axes
Helical interpolation
Not applied to additional axes
3гd, 4th reference point return G30 ,ξ ,ξ
Spindle speed designation S4-digit direct speed designation
Spiπdle function Spindle speed override Override on designated speed 50 ^120 10 increments
Spindle speed output Anaiog/binary output
Manua1 continuous feed
Feed function Rapid traverse override F and 
Feedrate command Direct programming of mm/min or in/min ,
Automatic acceleration/dececeratïon
İncrementalleed X1, X10, X100
Exact stop/cutting mode G09, G61, G64
Tool number designation T2-digit command for fixed address
Cutter compensation C G40, G41, G42
Tool function Tool length compensation G43, G44, G49
Too1 offset amount memory 64 pairs, digits, common to a11 axes
Miscellaneous function M2 dígit BCD output
Skip function G31
Programmable mirror image ,
Coordinate system rotation G68, 
Programmable data input 
Coordinate system 3-Dimensional tool compensation G40, G41
Work coordinate system G54^G59
Local coordinate system G52
Work coordinate system change G92
Absolute 8 incrementai programming G90, G91
Decimal point input
Run hour display
Graphic display function