Cette machine est vendue
Découpe Laser TRUMPF - TruLaser 3030
MACH-ID 9235| Marque: | TRUMPF |
| Taper: | TruLaser 3030 |
| Contrôle: | TrueTops |
- High speed cutting with precision
- Tower and Sheetmaster NOT included
- Low operation cost
- Compact foot print
- Change table ( liftmaster and tower not included
- Possible to cut reflective material (copper, brass)
- Mild steel : 20 mm
- Stainless: 15 mm
- Aluminium: 12 mm
- Copper / Brass: 6 mm
- - User-friendly interface with graphical programming
- Supports automatic nesting, cutting parameter libraries, and real-time diagnostics
- Interfaces seamlessly with TRUMPF's automation modules and networking systems
- Real-time control of laser, motion, and auxiliary systems
Caractéristiques
Working area X Axis
3000 mm
118.11 inch
Working area Y Axis
1500 mm
59.055 inch
Working area Z axis
115 mm
4.528 inch
Table Length
3000 mm
118.11 inch
Table Width
1500 mm
59.055 inch
Power resonator
3 kW / Amp
3 kW / Amp
Feed rate X-Axis
170000 mm/min.
170000 mm/min.
Feed rate Y-Axis
170000 mm/min.
170000 mm/min.
Feed rate Z-Axis
170000 mm/min.
170000 mm/min.
Sheet master loading arm
No
No
Sheet tower storage
No
No
Commande
TrueTops
TrueTops
Cutting hours
25000 H
25000 H
Dimensions (Estimation)
Longueur
9000 mm
354.33 inch
Largeur
5000 mm
196.85 inch
Hauteur
2200 mm
86.614 inch
Poids
7650 kg
16873 lbs
Important : les informations sur cette page ont été obtenues au meilleur de nos connaissances auprès des fabricants. L'exactitude n'est pas garantie mais les informations sont données de bonne foi. En conséquence, cela ne constitue pas une représentation ou des conditions contractuelles. Nous vous recommandons de vérifier tous les détails essentiels !
- Comparison between fiber laser and CO₂ laser system
- Short wavelength fiber / Co2 1.06 / 10.6 uM
- Fiber is much faster specialy in thin sheet
- Fiber much less running cost 50 % more energy effient
- No mirror or laser gas = less maintenance
-
✅ Choose Fiber If:
- You cut thin to medium sheet metal
- You work with reflective metals like copper or aluminum
- You want faster cutting + lower operating cost✅ Choose CO₂ If:
- You mainly cut thick mild steel
- You need superior edge quality on thick plates
- Your budget is tighter for initial machine cost
